Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹13.9 L+₹20,325 (1.49%)Rejected-Finance WARD NO 26 OLD 36 NEW NEAR FIRE BRIGADE OFFICE RCP TAL COLONY ROAD SURATGARH 335804 SRI GANGANAGAR RAJ | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹15.9 L+₹2.3 L (16.7%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹18.9 L+₹5.3 L (38.6%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | Rejected-Technical BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | - | Rejected-Technical Applicant not enlisted in appropriate category |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 May 2024, 6:00 pmClosed
GARRISON ENGINEER (WEST)
KABIR ROAD JALANDHAR CANTT
REPAIR/ MAINTENANCE WORKS TO CHARPOY GI PIPE NYLON NEWAR/ CHARPOY IP/ CHARPOY GI PIPE AND RE-CANNING TO DIFFERENT TYPE OF CHAIR FOR MD ACCN OF JCOs/OR, OFFR AND OTM UNDER GE (WEST) JRC
2024_MES_648384_2
GE/JAL(W)-95/2023-24
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER (WEST)
₹40,000
Yes
1 Jul 2024
3 May 2024
31 May 2024
3 May 2024
29 May 2024
17 May 2024
Amount
CHARPOY GI PIPE WITH NYLON NEWAR Supply & fixing for 1.88 meters long rail made out of 32mm dia. GI Pipe medium grade ISI marked duly threaded both ends and including taking out old unserviceable long rail from the existing GI charpoys frame complete all as specified and as shown on drawings & as directed by the Engineer-in-Charge.
Fixing only 0.815 meters short rail made out from old long rail 32mm dia GI Pipe retrieved from Srl item No 01 here in above including cutting and threading both ends & fixing in position to the entire satisfaction of the Engineer-in-Charge and including taking out old unserviceable short rail from the existing GI charpoy from complete all as specified and shown on drawings & as directed by the Engineer-in-Charge (Retrieved long rail will be issued free for making short rail).
Fixing only 0.410 metres leg made out from old short rail 32mm dia.GI pipe retrieved from Srl item No 02 here in before including cutting and threading both ends & fixing in position to the Entire satisfaction of the Engineer-in-Charge and including takjing out old unserviceable leg from the existing GI charpoy frame complete all as specified and shown on drawings & as directed by the Engineer-in-Charge (Retrieved short rail will be issued free for fabricating and assembling).
Supply & fixing GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia. GI pipe charpoy including taking out old unserviceable elbow from the existing GI charpoy frame complete all as specified and shown on drawings & as directed by Engineer-in-Charge.
Supply and fixing GI check nut duly threaded suitable for 32mm dia. GI pipe charpoy including taking out old unserviceable check nut from the existing GI Charpoy frame complete all as specified and as directed by Engineer-in-Charge.
Material and labour for reweaving of GI pipe charpoy with nylon newar (White colour as per sample held in GE office of first quality ( of make Evershine or Usha) 50mm to 55mm wide of weight not less than 1.50Kgs per Charpoy, 13x13 band would be closely woven, Nylon newar to be taken over the frames, inter woven, making two layers separately and the adjustment of Nylon Newwar shall closely woven against each other and shall be pulled tightly (Weaving pattern closely knit shall be followed for both and bottom layers of newar including taking/cutting out old unserviceable Newar from the existing GI charpoy frame and preparation of frame after tightening loose joints incl any threading reqd fortightening of GI pipe charpoy to the entire satisfaction of the BSO complete all as specified and as directed by Engineer -in-charge
CHAROPY HARD TOP S&F Plywood 12mm thick commercial 1980mm x 900 mm BWR ISI Marked as specified and directed by Engr-in-charge.
Supply MS Flat Iron 900mmx 40mm x 5mm duly painted with one coat of red oxide and over a one coat of paint syanthetic enamelled black as specified and directed by Engr-in-charge.
S&F Counter Shunk head nut & Bolt steel with washer 60/65 mm x 6mm to fix the plywood top as specified and directed by Engr-in-charge.
Drilling for re-hole to Charpoy GI Pipe 32 mm dia on existing hole to fix the nut and bolts as specified and directed by Engr-in-charge.
M & L for recanning of various types of wooden/Steel chairs and other items of furniture which require canning. The canning shall be done in GODREJ PATTERN with half round plastic cane 2 mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unsv cane from the frame complete all shown on the drawing, spfd and as directed by Engr-in-Charge Make of cane : PremierShah Plastic/Premer /Gola
M & L for preparation of old steel surfaces of Chair verandah complete and applying one coat of synthetic enamel paint (White) all shown on drawing, spfd and as directed by Engr-in-Charge. Make of synthetic enamel paint.Apcolite of Asian Superlac of Shalimar , Good luck of Nerolac berolac of Johnson & Nichoson
M & L for Recanning of chairs verandah with and including cane plastic 4mm wide half round complete including cutting and removing of old unsv cane/newar of chairs verandah all shown on drawing, spfd and as directed by Engr-in-Charge. Make of Cane : Shah Plastic/Premier/Gola
M & L for providing PVC shoes of best quality including removing of old unsv PVC shoes from chair steel varandah complete all as spfd and as directed by the Engr-in-Charge.
M/s Shubham Enterprises
GLOBAL ENGINEERS AND INNOVATORS
B S ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .