Siwan Detailed Project report for construction of Sewage Treatment Plant and Sewerage network in village Siwan Tehsil and District Kaithal

Amount

Design, construction, erection, testing and Commissioning of MPS and following Components including O & M for 10 Years :- (i) Panel room of 30 sq. mtr. Covered area and PLC room including toilet block of 20 sq. mtr. covered area with RCC framed structure of brick work vitrified glazed tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame with 5mm thick glass AIS/Saint Gobain/ Modi Float. The toilet block shall be with one half staff urinal & one European W/C, one wash hand basin as per approved drawings. (ii) RCC inlet chamber, screen chamber, rectangular collecting tank suitable for 4.50 MLD average flow with peak factor of 2.50, landscaping of the campus, providing and installing 1 No. of 562.50 m3 / hour, 2 No. of 187.50 m3/ hour and 2 No. of 93.75 m3 / hour at 20 mtr. head each with suitable LT Panel equipped with all safety devices, automatic capacitor bank and submersible cable from LT Panel to pump sets complete in all respects. (iii) K-9 D.I. Pipe of suitable dia at MPS including welding and screwing of Flanges. ISI Marked D.I. fittings, Sluice Valves, Non return valves as per requirement even for bye pass arrangement complete in all respects. (iv) 3 Nos. CI Gear Operated Sluice Gate with SS spindle (SS 410) and seats (SS 304) (2 Nos for Screens and 1 no. for partition of collecting tank) as per design. (v) Supply and installation of 2 Nos. mechanical coarse screens of minimum length 6 meters for 4.50 MLD average flow with peak factor of 2.50. Note: 1. The connecting sewer of same diameter and material of construction, laid at adequate depth between existing sewers to newly constructed structures is included in scope of work. 2. All the infrastructure except construction of staff quarter, and path ways/ roads required to be executed at site to make the MPS functional is included in the scope of work of lump sum job. 3. All the Pumping Machinery, Panel Board, Level Sensor etc shall be controlled by PLC & SCADA and shall be synchronized with the PLC panels at MPS & STP site through broadband internet facility. 4. The size and quantities of all the above components will be as per approved Structural/ Hydraulic/ Mechanical/ Electrical Design to be approved by Department before actual execution of work including O&M of 10 years.

TRANSFORMER, D.G. SET & FENCHED ENCLOSURES INCLUDING BLOWER Design, Supply & Erection of 1No. Transformers of 300 KVA capacity or near capacity on greater side of standard make outdoor type with servo stabilizer, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels along with for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including O&M for 10 years.

b) Supplying & installation of 200 KVA silent DG set comprising of Water Cooled Diesel Engine Model 3R1040T G1 (CPCB Norms Compliance) developing 42 BHP @1500 RPM & 250.00 KVA alternator rated at 3 Phase, 415 volts, 50 Hz, 0.8 p.f @ 1500 RPM both mounted and aligned on a common MS base frame complete with MS Fuel Tank, Standard Manual, Control Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame, 1 No. 12 Volts Battery (Koel Green) Battery Leads, 1st fill of Lube of all used in Sound Proof Acoustic Enclosure. Engine speed Governor (Mechanical) Class – A Governing as per BS 5514 Flywheel Air cleaner with filter Turbo charger & after cooler Radiator & Fan Assembly Torsion Vibration Damper 24 Volts electrical starting arrangement consisting of dynamo & self starter Battery charging alternate 24 V. Gear pump for forced feed lubrication Fuel injection pump MICRO/ BOSCH MAKE Filters Double level Lubricating oil filter and lubricating oil cooler For high cooling water temperature and low lubricating oil pressure with alarm and shut down facility. Instrument panel comprising of cutout control, push button for self starter temperature guage for cooling water, Tacho cum/ hour counter, pressure guage for lubricated oil, fusesand battery charging ammeter. Flexible rubber coupling Heavy duty industrial silencer 1 No. fuel tank with capacity of 500 ltrs. Fabricated out of 10 guage M.S. sheet welded. Earthing with tinned copper rate 600 mm x 600 mm = 3 mm thick including accessories and connections from earth electrode with copper strives 32 mm x 6 mm thick = 6 No. Change over switch including O&M for 10 years..

Supplying, laying, jointing and testing 560 mm OD HDPE pipe as per IS:14333-1996 PE 100, PN-6 with Co-extruded copper wire rising main from MPS to STP including O&M for 10 years.

SEWAGE TREATMENT PLANT - PART-II (SBR) Technology complete in all respect including disposal of treated effluent through S.W pipe on pillars by gravity, Landscaping, MCC Panel Room & all other contingent Electrical, Mechanical, Piping & Instrumentation works. With PLC & SCADA Arrangement for STP & MPS along with Synchronizing it with each other including furniture & laboratory equipments as per detail given in the bid document and including following components including O&M for 10 years:- (i) 2 No. High Mast of 9 mtr GI Octagonal pole of 4 mm thickness (T=100 mm, B=200mm, Base Plate = 320 x 320 x 20 mm), Window at 500 mm from Base Plate with 4 No. LED energy efficient lamps on each pole. (ii) Supply and installation of 1 No. SS Main Gate of SS-304 Grade 12 ft. wide main gate and 4 ft. wide wicket gate (total weight not less than 500 kg) at STP site. (iii) Providing and installing 2 No. centrifuges (1Working + 1 Stand bye) including centrifuge feed pump, all fittings, instrumentations, electric panel board etc. as per design complete in all respect including packing dry sludge in 20 Kg. bag and supplying the same to market Kisan Sewa Kendra or as directed by Engineer-in-charge within the lead as pointed at clause 4.4.5 of the NIT, including operation & Maintenance of 10 Years.

CCTV CAMERAS Providing and Installing 5 CCTV Cameras (3 Cameras for STP and 2 Cameras for MPS) complete as per satisfaction of the Engineer– in- Charge, within 96 hours of signing the Agreement along with 90 days recording (DVR), 32 inch LED Screen, 16 Channel DVR at STP Site and 8 Channel DVR at MPS Site with connectors, cables, poles and power supply with online real-time output facility. The cameras at both the sites i.e. MPS and STP shall be synchronized at STP site. Cameras: i) At STP & MPS Site- 1 No. PTZ speed dome 360 degree 50X zoom camera, 3 No. 12mm lens size, 1 Nos. 3.6mm lens size. Make: - Sony/ Canon/Panasonic/ Samsung. CCTV Cameras should be installed and commissioned before starting execution of work including operation & Maintenance of 10 Years.

TRANSFORMER, D.G. SET & FENCHED ENCLOSURES Design, Supply & Erection of 1No. copper wound Transformer of 200 KVA on load tap changer or suitable capacity on higher side (at STP) of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels along with for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 10 Years.

Design, Supply & Erection of 1 No. DG Set of 125 KVA or suitable capacity on higher side (at STP) 40 KVA at MPS capacity each with Acoustic Canopy, AMF Panel and Copper Earthing of suitable rate with change over switch & synchronizing panel complete as per DNIT including operation & Maintenance of 10 Years.

Construction of HT / LT Panel room, PLC room, Centrifuge house, blower room and Lab cum office building including doors, windows & fittings with toilet block including all Sanitary fittings etc. as per drawings attached in DNIT at MPS & STP site covered area with RCC framed structure of brick work vitrified glazed tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame with 5mm thick glass AIS/Saint Gobain/ Modi Float Covered Area (200 sqm) including operation & Maintenance of 10 Years.

SUB: ONLINE OUTLET EFFLUENT WATER QUALITY MONITORING SYSTEM FOR BOD, COD, TSS, PH Supply, installation, testing, commissioning, operation and comprehensive annual maintenance of effluent quality monitoring system at 4.50 MLD STP Siwan for online (continuous) measurement of PH. Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (spectral measurement in the UV-VIS range 200-720mm) performing reagent and chemical free analysis with automatic cleaning of censor, signal cables and power cables, local data acquisition and display of data on continuous basis for up linking the data in CPCB, HSPCB & PHED. TUV approved complete in all respect as per Central Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents and as contained in scope of work in the notice inviting tender. a) Multi-parameter measuring converter, for connecting upto 18 intelligent sensors scope including 8 analog inputs/ outputs (4 inputs & 4 outputs) (0/4-20Ma), wide range power supply optical COD/BOD and TSS probe with spectral processing of the UV-VIS range, for measurement in the outlet/ effluent of municipal waste water treatment plant of 4.50 MLD STP at Siwan District Kaithal with integrated with automatic cleaning. b) Robust digital pH/ ORP sensor for pH/ORP electrodes, with built-in pre-amplifier & temperature sensor with Automatic Temperature Compensation (ATC) Cable lengh 100 Metre (minimum). c) Sensor adaptor cable for all intelligent sensors, with IP68 water proof connection to the intelligent Sensor Net system Cable length 100 metre (minimum). d) Data transfer to CPCB, HSPCB & PHED servers during 1 years of O&M after commissioning after 3 months trial period (including 1 year of defect liability period). e) Providing GSM 3G, 4G modem with mobile network connectivity including network charges for 10 year of O&M after commissioning after 3 months trial run (including 1 year defect liability period).

Bidder Name

Amount

JAI HANUMAN BUILDERS

V.S.Enterprises

A.U.B. Constructions

A.U.B. Constructions

JAI HANUMAN BUILDERS

JAI HANUMAN BUILDERS

A.U.B. Constructions