Z.O.1.C.No.B2/4836/2025

Dismantling Plain Cement Concrete

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only If Work Is Done During Night)

Supplying And Fixing Interlocking Blocks Against Available Edge Restraints 60 mm Thick of Approved Design And Pattern of Strength 30 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 30 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To-Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).

Construction of cast-in-sit Silt Catch Pit with Rain Water Harvesting Structure of inner size 600x600x600mm including necessary earth work excavation inclulding providing foundation in PCC 1:5:10 under walls 150mm thick and fixing vertical grating of size 450mm length x 155mm height and 30mm thick on the storm water drain mouth, with RCC cast in situ wall of size 120mm in RCC 1:1.5:3 with steel of 10.60kg including fixing FRP Grating Cover with frame of size 700mmx700mm (Clear opening 600x600mm) - 10MT completing the finishing work etc., cost per each number. Using Hand Bore Set drilling of bore hole of 300mm dia upto 4.35m depth including shifting of the hand bore from one place to another place within 5km and filling in with 40mm HBG metal with 200mm dia PVC pipe 6kg/cm2 (SWD 21)

Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8"X2.3/4" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc. Complete

Carting away

Please Enable Macros to View BoQ information