CONSTRUCTION OF 02 X LRC IGLOO 75 MT CAP (25 MT NEC) FOR STORAGE OF 1.1 UNHD AMN ALONGWITH PERMANENT ANTI FLOOD BUND, 04 X SWT WITH ALLIED INFRASTRUCTURE AT 28 MTN DOU 281 AP AT TANGDHAR

Amount

Note: (i) Please refer Schedule 'A' Notes given in tender documents. (ii) The Schedule 'A' Part-XII is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS

Lump sum price worked out by the contractor for BUILDING WORKS carried forward from Pre-Priced Schedule 'A' Part-I.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-II.

Lump sum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS carried forward from Pre-Priced Schedule 'A' Part-III.

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS carried forward from Pre-Priced Schedule 'A' Part-IV.

Lump sum price worked out by the contractor for PROTECTIVE WORKS carried forward from Pre-Priced Schedule 'A' Part-V.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS carried forward from Pre-Priced Schedule 'A' Part-VI.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-VII.

Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORKS carried forward from Pre-Priced Schedule 'A' Part-VIII.

Lump sum price worked out by the contractor for SITE CLEARANCE & EARTHWORKS carried forward from Pre-Priced Schedule 'A' Part-IX.

Lump sum price worked out by the contractor for DEMOLITION/DISMANTLING WORKS carried forward from Pre-Priced Schedule 'A' Part-X.

Lump sum price worked out by the contractor for FENCING, GATE AND COMPOUND WALL WORKS carried forward from Pre-Priced Schedule 'A' Part-XI.

MISCELLANEOUS ITEMS OF WORKS (SCHEDULE 'A' PART-XII) (A) INTERNAL ELECTRIFICATION WORKS

Supply and fix flame proof sheet metal enclosure MCB distributiion box single pole & neutral 240 Volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

Supply and fix MCB 'C' series, Single Pole and Neutral (SPN) 240 Volt, 6 to 32 Amp complete all as specified and directed .

Supply and fix MCB 'C' series Single Pole (SP) 240 Volt, 6 to 32 Amp complete all as specified and directed .

(B) EXTERNAL WATER SUPPLY WORKS

Material & Labour for Tee pieces (single & double branch) of size 50/40 mm straight connecting pieces but all ends flanged etc including necessary joints and jointing materials complete all as specified and directed.

(C) EXTERNAL ELECTRIFICATION WORKS

Material and Labour for Security light bracket made of GI tubing, suitable size as per street light manufacturing, light grade 1.2 mtr long bend to shape suitable for street light fitting with fix to pole with the help of flat iron clamp of suitable size as per street light fixture, two numbers with the help of nuts and bolts for fixing of street light fitting with one coat of red oxide and two coat of aluminium paint complete all as specified and directed.

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 166 x 98 mm including - 02 Nos cable terminal, 02 Nos polycarbonate cable gland, 01 Nos DIN rail and 01 No, MCB SP, 10 KA 6 Amps complete all as specified and directed.

Supply, installing, testing and commissioning, factory made and tested (prototype having been CPRI type test certified), outdoor LT Panel, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars of 100 Amps rating as specified installed, on polymer insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, externally and internally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front /Rear opening type, with aprons for cable entry, with two layers of Sheet Metal Cover (should have one set of doors on inside and one set of doors outside), capable of withstanding snow and rain at installation site with maintainence proof design, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, having one chamber with door for each MCCB, having two empty chambers for future use, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size incl the provision of space to accommodate the under mentioned items. The scope of this work includes the following:-

(a) Incoming:- (i) MCCB 4 pole, 415 volts AC grade, 63 Amps rating and 10 KA rupturing capacity - 01 No. (b) Outgoing:- (i) MCCB TPN 40 Amps, 415 volts AC grade, and 10 KA rupturing capacity - 03 Nos (c) Digital volt meter 3 phase class1 - 01 No. (d) Digital ammeter 3 phase class1 - 01 No. (e) Indicator lamp R Y G B - 01 set (f) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone , 15 cm thick in foundation, brick work in CM 1:6 with sub class `B', old size bricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45cm above the nearest road/ ground/ floor level. (g) Secure 3 Phase, 1 Element, 4 Wire 440 V Digital Power Factor Meter - 01 No. (h) Current Transformer 25/5 - 01 No. Note :- (i) All out going feeders shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint.

Supply & installation of 12.5m High Mast shaft in two section suitable for 55 m/sec wind speed along with head frame, luminiaries carriage suitable for 06 luminiaries in symmetrical arrangement and other accesories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, (wiring material from JB to individual luminiare & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries, power tool control with 2 No 9A contactors and raise lower push button, incoming 25 sq. mm and outgoing 10 & 2.5 sq. mm terminals. The details are as follows:-

HIGH MAST SYSTEM: Height of mast : 12.5 Meter No. of Section : Two Material Construction : S355 Grade as per BS-EN10 025 Base dia and top diameter (A/F) : Top - 120mm Bottom - 380 mm Cross section of Mast : 16 side polygon Standard for Galvanisation : As per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 550 mm Thickness of base plate : 20 mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 50m/s as per IS 875 (Part III) Number of foundation bolts : 10 Nos PCD of foundation bolts : 550 mm Type / diameter / length of foundation bolts : TS 600/30mm dia/ 850 mm long

LUMINAIRES CARRIAGE: Material of construction : 50 NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 06 Arm, Welded, 2 Sections Load carrying capacity : 08 Luminaire Lightning arrestor : 01 No. TRAILING CABLE: Conductor : Copper, 5 core, 2.5 Sqmm Insulation : EPR insulated PCP scheathed No.of circuits per mast : One WINCH / POWDER TOOL: Type /SWL of winch : Double drum, SWL 750 Kg - SGDD Method of Operation : Integral Motor Motor Capacity : 1.0 HP (including suitable starter) No of Speeds : 6 Pole, Single speed Torque Limitor : With Mechanical Tripping Facility STAINLESS STEEL WIRE ROPE: Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : 6 mm Breaking load Capacity : 1850 Kg x 2

Supply and fixing of LED flood light fitting 120 Watts (with total lumen output not less than 15000 lumens with ingress protection IP 66 and external SPD of capacity 10 KV in addition to inbuilt SPD of electronic driver , having Pressure die cast housing with high efficient output emitter LED for better distribution, protection with heat resistant toughned glass with individual LED lenses complete including MS Clamps of suitable size for fixing on High Mast /Pole complete all as specified and directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm, 3 core, 1100 Volts grade for connection of security/street light fitting from junction box complete all as specified and directed.

(D) LIGHTING PROTECTION WORKS

M/S SHAH CONSTRUCTION

SHAH AND SONS