SPECIAL REPAIR ALONGWITH ADDN ALTN TO HARD STANDING CERTAIN B AND R AND E AND M WORKS IN THE TRG AREA OF AIR HANGER INCLUDING CERTAIN REVENUE AND MINOR WORKS AT MILIT GIRINAGAR PUNE

Amount

B/R PORATION(BUILDING INCLUDING INTERNAL SERVICES) M&L for Roughening surfaces of old concrete floor by mechine picking, chipping, sweeping clean and washing down with water to remove dust etc. complete all as directed by Engr-in-Charge.

M&L for sand cushioning below interlocking paver block complete.

M & L for machine made Rubber moulded glazed precast concrete interlocking paver block (coloured), Glossy finish pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm gde stone aggregate) as in filling and mass concrete.

S&F steel work in tubular trusses, cantilever, purlin including special shaped washer etc. complete using ERW or induction butt welded square/rectangular pipes including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc.

M&L for cement concrete type C2 1:3:6 (40mm Graded aggregate) as in surface channels and drains including necessary form work for sauccer drain complete.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred /stopped ends etc.

S&F for Factory made smooth finish heavy duty pre-cast R.C.C. manhole cover with frame, size exc. 1.00 Sqm and not exc. 2.00 Sqm each, shape rectangular/square as directed by Engr-in-Charge and including necessary cement concrete work for fixing of cover in CM 1:4 complete.

B/R PORTION OF REVENUE WORK ( ROOM NO 313 (A) ) S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F 12mm thick prelaminated particle board both side with decorative choice laminations, interior grade, fixed with screws to Aluminium frame work complete.

M&L for solar control film 25micron relfective type sticked to glass panes as per insturction of manufactureres.

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed.

S&F zebra venetion blends with design on inner/outer face alternate blinds, folding type made out of fibre cloth fixed, to wall with necessary Aluminium brackets, screws etc. including Aluminium frame for venition blinds etc. all as approved by Engr-in-Charge and all as specified and directed. Make;- Vista, Levador or equivalent.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in skirting/vertical surfaces etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 .

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames).

M&L for 40mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete.

M&L for 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete.

M&L for 125mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12.

M&L for brass, 4 levers mortice lock, vertical type complete.

S&F for 125 mm long stainless steel chromium plated door stopper fixed to door bottom rail complete all as directed.

M&L for Brass chromium plated tubular handle 300mm long 25mm dia including necessary fittings and fixture for fixing to door.

S&F 200mm long decorative brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured (K2C2) tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled contentof 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. the tile and grid system used together should carry a 15 year warantee. including taking down of old false ceiling complete ( Make : armstrong, saint Gobain)

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for rendering 15mm thick on precast cement concrete block masonry with solid block, brick work surface in CM 1:6 finished even and smooth without using extra cement.

M&L for applying two coats of acrylic emulsion paint (luster paint) internally over a coat of acrylic primer over and including 2mm thick wall care waterproof putty in two layers on old and new surfaces of wall complete all as specified and directed.

MINOR WORK ( Provn of aluminium sliding enclosure with aluminium gate at JCO mess) S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F anodized aluminium door shutters aluminium section weighing not less than 0.55kg/m including necessary joining cleat glazing clip, rubber neoprene packing, handles 2 no in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. including Powder coating of any colour (Thickness of powder coating not less than 50 Micorn).

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete. Make :- Godrej, Hettich.

M&L for solar control film 25micorn relfective type sticked to glass panes as per insturction of manufactureres

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

Dismantling of brickwork or stone/boulder masonry, built in cement mortar complete.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in Roof beams, lintels, cantilevers etc.

M&L formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

Mild steel TMT bars 5 to 10mm dia as in sturrips scut to length bebt to shap required including cranking, bending etc and bindidng and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

M&L for Fly ash bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete.

Rendering 15 mm thick on brick, stone surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick on brick, stone or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L for Non Skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) in Door/window-cills, steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to one edge of granite and polishing complete.

Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil.

M&L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc.15cm thick including watering and ramming upto a true surface.

M&L for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base 75mm thick complete.

M&L for sand cushioning below interlocking paver block complete.

M&L for Machine pressed glossy finished rubber moulded coloured precast cement concrete interlocking paver block with pigment and shape, size as approved, conforming to IS 15658-2006 of 60mm thick, M-35 Grade.

M&L for coloured glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set and jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in bed block, kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

Minor Work ( Provn of aluminium screen/view cutter at rear access of AV room at MILIT) S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F 12mm thick prelaminated particle board both side with decorative choice laminations, interior grade, fixed with screws to Aluminium frame work complete.

Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

M&L for 304 grade stainless steel work as in railing with hand rail, baluster, including cutting, Stainless steel welding and fixing of stainless steel baluster/railing and complete all as specified and directed by Engr-in-Charge.

MINOR WORK ( Provn of reinforcement of wooden floor in Romm No B-163 at MILIT) Dismantling boarding of any description and fixed in any position with nails complete.

Cutting holes exc.One brick but not exc.Two bricks in brick/concrete walls built in cement mortar or cement lime mortar.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in bed block for fixing of steel member to walls, all as specified and directed.

M&L for Rolled sections as in main or cross beams, hip and jack rafters, purlings where connected to common rafters and running rails fixed with angle cleats or other connecting plates.

M&L for plates (plain or chequered) channels, square cut or nothed (ordinary and counter sunk) forming holes, without any attachment complete.

M&L for Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exc. 10 cm width or girth etc.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new or old plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of wall complete.

M&L for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600mm x 600mm with using 32.5mm x 23.5mm x 1.5mm thick main tee, 25mm x 23.5mm x 1.28mm cross tee and 25mm x 23.5mm 1.2mm angle fixed to wall for false ceiling including necessary supporting hangar with 4.00mm dia GI wire nad 'J' hook bolts washer nuts for securing frame work to ceiling, suspended @ 120cm C/C both ways, size of grid shall be 605mm x 605mm complete all as specified and directed. Make:- Armstrong, Saint Gobain.

E/M PROTION ( SPECIAL REPAIR ALONGWITH ADDN/ALTN TO HARDSTANDING OF AIR HANGER ) Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm, 3 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as directed by Eng-in-charge of following.

S & Fix 3x1 sqmm PVC circular cable for connection of flood light fitting, on structure all fixing arrangement with proper clamping, sadling etc all as directed.

S & Fix Flood light fitting IP 66 lumenaire with high efficiency complete of capacity 30 Watts and fixing on roof / chanel with clamps, nuts, bolts all as directed Make : Bajaj BJFL30W LED or eqvt in wipro/Bajaj

Supply,fabricating and fixing in repair mild steel cross arm bracing supports, D-clamps, fabricated from structural steel section such as angle iron, chennel ,plate and flat etc including bolts, washers, welding, bending cold or hot, drilling holes for bolts,in any shape or size including two coat of synthetic aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified and as directed.

S & Fix outdoor type FRP junction box light weight suitable for Iron Structure mounting inclduing MCB SP 1 Amps single pole, flat iron clamp duly painted with two coats of aluminium paint over a coat of red oxide primer and GI nut, bolts, washers and necessary connector for loop in loop out cable connection and suitable size galnds, of size 230x170x105mm. Make - Syntex/ Anchor

S&Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S & Fix of MCB Triple pole 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Hard / dense or any type of soil including forming bottom surface etc.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point.

Supply & Laying 40 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement.

M &L for GI pipe ''light grade'' for road crossing / on wall / on pole for cable protection of following size:- Make: TATA/JINDAL/ PRAKASH SURYA (a) 40 mm dia

S & Fix PVC surface conduit 20 mm fixed to walls.complete all as specifed and directed by Engineer-in-charge.

(REVENUE WORK INTERNAL E/M SERVICES) M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed .(a) One light point controlled by one switch.

(b) One 3 pin switch socket outlet point 6 Amps on independent board.

(c) One 3 pin switch socket outlet point 6 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch 1 way 6A, 1 module

S & Fix modular switch1 way 16A, 1 module

S & Fix modular socket out let 6A 2/3 on combined 2 module

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module

S & Fix LED efficient LED recessed mounting fitting 2' X 2' luminaire to enhance the delight of occupents with comfortable experience through its classic design & glare free soft illumination all as specified & directed Make - Bajaj Cat Part No - BZRSQL 36L LED GX D WH SD or eqvt in Wipro/Havell/Crompton.

Taking down and refixing of existing point wiring for light fitting and fan point on fall ceiling complete all as specifed and directed by Engineer-in-charge.

Taking down existing old serviceble LED recessed mounting fitting 2' X 2' & refixing in old/ new position complete all as specifed and directed by Engineer-in-charge.

M & L for submain wiring with FRLS PVC insulated copper conductor single core cable , multistranded through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the following. 2x4 sq mm and 1x4 sq mm as earth wire.

S & Fix Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix LAN socket connecter RJ 45 with socket with copper feed modular type all as directed by Eng in Chrage.

S & Fix LAN cable 4 pairs PVC insulated and PVC sheathed all as directed by Engr in Charge

S & Fix PVC casing capping 25 mm fixed to walls.complete all as specifed and directed by Engineer-in-charge.

PAWAN B SHINDE

J.G.Goel

Mehta and Co.