ADDN/ALTN TO BOUNDARY WALL, FENCING AND PATH UNDER AGE B/R-II OF GE 865 EWS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station all as specified and as directed

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:6 complete all as specified and directed.

-ditto- as item srl No 02 but except stones complete all as specified and directed.

M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface lime or sand stone nexc. 40mm deep complete all as specified and as directed.

M & L flush pointing to random rubble masonary uncoursed or brought in CM 1:4 complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed block walling in CM 1:4 complete all as specified and as directed.

M&L for 20 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 including taking down of cement plaster, complete all as specified and as directed

M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for complete removal of existing finishes on wall and applyinh two coat of cement base paint on wall surface

M&L for PCC type B-2(1:4:8) using 40mm graded crushed stone aggregate as mass concrete for post hole all as specfed and drected.

S & F MS Work as of angles or tees fixed indipendently cut to shape drilled incl beding and welding angles of grade Fe-410 all as specified and directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel of any description and in any position complete all as specified and directed.

Welding in repair thickness of metal to be welded exc 20mm but n exc 25 mm size of length exc 2.5 cm but n exc 5 cm in length complete all as specified and directed.

S & F 0.80 mm thick plan galvanised mild steel sheeting as cladding, fencing etc conforming to class VIII complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10cm width or girth complete all as specified and directed.

Dismantling of steel sheeting any gauge thickness including Nainital or similar pattern roof covering (corrugagted or semi corrugated etc) sheet in roof covering all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station complete all as specified and directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases, floors and pavings,etc complete all as specified and directed.

M & L for 100mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-40 grade laid over and including 25mm thick sand cushion complete all as specified and as directed by Engr-in-Charge.

Excavation over area in Hard/dense soil n exc 1.5 mtr deep and getting out all as specified and directed.

M&L for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass conc as in fdn all as specfed and drected.

M & L RCC type B-1 1:2:4 (20mm grade crushed stone aggregate ) in slab supported on walls , beams and col in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L form work to soffits of suspended flat slabs such as roof slabs, floor slabs landings and similar works (smooth finishes flat surface of concrete) not exc 200mm thick (Horizontal or slopping) complete all as specified and directed.

Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 27 above but 6mm to 8mm dia complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard soil complete all as specified and directed.

Removal excavated material n,exc 50m and depositing where directed at a level n.exc 1.5 m above the startig point complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

M & L RCC M-25 as in foundation, incl rafts, footings, foundation beams, plinth breams for col etc slabs under reamed piles and mass concrete complete all as specified and directed.

S & F steel windows with side hungs shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars complete all as specified and directed.

S & f steel windows with side hungs shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed.

S & F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average with of aperure 1.40mm and fixed with beading to wooden frames all as specified and as directed.

S & F plain glass panes of 3 mm thick gazing with wooden beading square not exc 0.5 sqm in each pane for gazed and skelton shutter complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work surfaces finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed

M & L for prepartion of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer and 2mm thick birla wall care putty to obtain smooth finish etc including balance area including complete removal of existing treatment complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in levelling course to floor complete all as specified and directed

M & L Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S & F powder coated aluminium anodised door partly paneled and partly glazing with 4.5mm thick plain glass sheet/wire mesh and 12mm particle board interior grade both side laminated and aluminium section weight not less than 0.55kg/Rm with self closing hyduaulic door closer & floor spring etc with complete all fitting all as specified and directed.

M&L for precast cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate as in manhole cover slab set in cement mortar 1:6 incl necessary formwork, complete all as specified and as directed

R B TRADERS

Mehar Enterprises

SHUBHAM ENGINEERS & BUILDERS

M/S RIGDOL CONSTRUCTION

M/S SHAMSHER ALI SUFI