SPECIAL REPAIRS TO NB BLOCK SINGLE OFFICERS LIVING ACCN 1 TO 6 AT STATION OFFICERS MESS OF MRC UNDER GE WELLINGTON

Amount

Taking down PVC chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Pressed steel windows with Glazed and Wiremesh shutter (Double leaf, Gauged and Glazed) with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Pressed steel ventilators with top hung shutters including Box type hinges with steel handle and steel peg stay, complete all as specified and directed.

4 mm thick sheet glass, ordinary quality and glazing with oil putty and beads in squares not exceeding 0.5 sq. m in each pane all as specified and directed.

Applying two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over a coat of pink primer including preparation of surface complete all as specified and as directed.

Preparation of new or untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Preparation of old steel surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

preparation of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate bed blocks for hold fast, and like of any description, over 10mm in width or girth not otherwise described all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor and including fixed in repairs all as specified and as directed.

Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Preparing surfaces of small articles such as stop, covers, gully, gratings, hold fast, etc area not exceeding 0.1 Sqm each of any description and grith, not otherwise described and treated with or coal tar black paint all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm nd fixed with tinned or galvanised wire staple all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / shelf / partition / cabinet care case of required sizes made out of HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Make: Action Tesa or equivalent

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

Telescopic Channel in required length including all fixing accessories/ hardwares all as specified and directed. Make : EBCO or Equivalent

Fancy type decorative drapray rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, on floors etc set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including15mm thick screed in cement mortar 1:4 complete all as specified and directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed.

Granite slab 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Machine cut kota stone slab flooring/ cills mirror polished 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

Self embosed grooves, bull nose finished, anti skid, full body homogeneous vitrified tiles for steps (tread) of stairs of size 300x1200x13mm or 300x1000x13mm or 250x1000x13mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

Anti skid, full body homogeneous vitrified tiles for Risers of stairs of size 150x1000x13mm/ 200x1000x13mm or 200x1000x13mm/ 200x1200x13mm jointed in gray cement slurry and pointed in white cement with admixture of pigment to match over and including 10mm thick rendering in cement mortar 1:4 on stone/ brick/ concrete surfaces complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls/ ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed

Rendering 15mm thick over concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed.

Rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar, not previously plastered and scrubbing down with water etc to receive plaster, complete all as specified and as directed.

Rendering 15mm thick in two layers on stone masonry surfaces or surface other than fair face of brick work in cement mortar 1:4, finished even and smooth without using extra cement), mixed with water proofing compound complete all as specified and directed. Note: 1. Liquid WPC shall be measured and paid separaterly.

Supply only liquid water proofing compound all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted over a coat of primer over and including one coat in two layers coats of 2-3mm thick external wall care putty smooth finish complete all as specified and as directed.

Preparing surfaces, plastered or unplastered on new wall surface and applying two coats of white wash complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer over and including a coat of wall care putty in two layer, 2-3mm thick in two layers on newly plastered wall surface including preparation all as specified and directed.

Preparation of new ceiling surfaces and applying two coats of oil bound distemper over one coat of primer over and including one coat of putty in two layer, 2-3mm thick in two layers complete all as specified and directed.

Preparing surfaces, plastered or unplastered on new ceiling surface and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying one coats of primer (water thinable/ solvent thinable) over and including one coat of putty in two layers 2-3mm thick even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Complete removal of existing treatment of ceiling surfaces and applying one coats of primer over and including one coat of putty in two layers 2-3mm thick even and smooth and applying two coats of oil bound distemper (washable) complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of walls by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete including fixed in repairs all as specified and directed.

Floor mounted coupled water closet of size 380x660x765mm with flushing cistern, with UV soft close seat cover, Hinges, fixing Accessories set including S trap including fixed in repairs complete all as specified and directed. Make: Cat No LYS-WHT-38751S & LYS-WHT-38201 of Jaquar or techno commercially equivalent

Supply and fix in repairs table top basin of size 485x395x150mm including waste coupling and waste pipe complete all as specified and directed. Make: Cat No JDS-WHT-25909 of Jaquar or techno commercially equivalent

Single lever basin mixer tall body, brass chroumium plated, without pop up waste system and 450/600mm long braided hoses complete fixed in repairs all as specified and directed. Make : Jaquar or techno commercially equivalent

Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs, complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or equivalent

CP single lever exposed parts Kit of Hi Flow Diverter Consisting of operating Lever, Wall Flange (with seal) & Button spout complete fixed in repairs all as specified and as directed. Make: Cat No KUP-35079KPM of Jaquar or equivalent

Concealed body for single lever high flow diverter with button assembly, cartridge sleeve (without exposed part) complete fixed in repairs all as specified and as directed. Make: Cat No ALD-079 of Jaquar or equivalent

Spout with button attachment for Hand shower with wall flange complete fixed in repairs all as specified and as directed. Make: Cat No SPJ-35463PM of Jaquar or equivalent

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 300 mm long and fixed in repairs complete all as specified and as directed. Make: Jaquar or equivalent

Chroumium plated, brass, fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make: Cat No CON-041KN of JAQUAR or techno commercially Equivalent

Soap dispenser, brass, chromium plated, with mettalic bottle complete fixed in repairs all as specified and as directed.

Supply and fix in repairs towel rack 600mm long with lower hangers as in bathroom complete all as specified and directed.

CP toilet paper roll holder complete fixed in repairs all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs all as specified and directed.

Angular stop cock with wall flange for 15mm dia of chorumium plated fancy type in repairs complete all as specified and directed. Make: Cat No CON-059KN of JAQUAR or Equivalent

Bib tap fancy type chromium plated fixed to 15mm bore in repairs complete including fixed in reapirs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make:Cat No.ACN-1131N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed

Supply and fix in repairs Chromium plated hand shower rose 120mm dia round shape multi flow with cascade effects rubit cleaning system complete all as specified and directed. Make: Cat No HSH-1731 of Jaquar or equivalent

Hand shower flexible tubes 12mm dia & 1.5m long with nuts complete and fixed in repairs all as specified and directed. Make: Cat No SHA-549D12 of Jaquar or equivalent

Supply and fix in repairs premium Chromium plated wall bracket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed. Make: Cat No SHA-555 of Jaquar or equivalent

Taking down GI tubing 15mm bore medium grade and connections, all as specified and directed.

Taking down GI tubing 20mm bore medium grade and connections, all as specified and directed.

Supply, laying and testing steel water tubing 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Supply, laying and testing steel water tubing 20mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of size 20mm dia (Minimum weight 25mm-455gms) complete all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers, hoisted and fixed in position with proper inlet and outlet connections including brass float valve 20mm bore all as specified and as directed

Stainless steel plate track of size 0.9 X 1.2 m complete all as specified and as directed.

Demolition and breaking up drain pipe of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe with oval access door complete all as specified and directed

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4,complete all as specified and as directed.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

Demolition of cement concrete reinforced in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

75mm thick plain Cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

Rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:3 at sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturers instructions complete. Note: Supply of liquid intergral water proofing compound will be measured and paid seperately.

Applying for waterproof and damp proof treatments a uniform coat of blown grade bitumen 85/25 @ 1.20 Kg per Sqm conforming to IS 702/cold applied bituminious elastomeric coat over a coat of primer in sunken floor including cleaning surfaces all as specified and directed.

Priming surfaces with a coat of primer @ 0.70Kg per Sqm over plastered surfaces and applying heavy treatment (for severe conditions) conforming to IS 3384 in sunken floor all as specified and directed.

APP modified prefabricated five layer water proofing membrane, 3mm thick and weighing not less than 3.6 kg/Sqm as discribed at sunken floor on primed surface by forced application complete in sunken floor all as specified and directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of liquid integral water proofing compound will be measured and paid separately

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Lean concrete 1:5:10 type E2 with 40mm graded stone aggregate with lime mortar 1:3 filling in sunken portion all as specified and directed.

Cutting into existing manholes for connecting new drains of 100mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Plain cement concrete in surface channels and drains finished even and smooth of type D-2, 1:4:8 using 40mm graded stone aggregate complete all as specified and directed.

Demolition of cement Concrete of any description and in any position including padding concrete of roof / chajjas all as specified and directed.

Providing cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 50mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement all as specified and directed.

Rendering 10mm thick fair faces of brick work or concrete surface in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green at any height and making the surface fair and even without using extra cement including using liquid integral water proofing compound as per manufacturer's instructions all as specified and directed. Note: Water proofing compound will be measured and paid separately.

APP modified prefabricated polymeric water proofing membrane mineral finish 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non-woven polyester matt black finished weighing not less than 100 gm/sqm having softning point less than 140 degree celcius longitudinal tensile strength not less than 300N/sqcm, side lap 10cm with torch application of membrane over compatible primer at 0.40 Ltr/sqm and aluminium paint at 0.10 kg/sqm finished on top complete all as specified and directed.

Plain cement concrete Type B1 1:2:4 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) 100mm thick as in flooring, tank stagging complete fair finished even and smooth without using extra cement all as specified and directed.

Demolition of reinforced cement concrete of water storage tank any description and in any positrion all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of flooring and finished even and fair complete all as specified and directed.

Chequered cement concrete coloured tiles 30 cm x 30 cm x 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.

Sand cushion 50mm thick and well ramming including watering as required complete all as specified and directed.

Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

Point wiring complete 1.5 Sqmm FRLS grade single core PVC insulated, unsheathed 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit medium grade concealed on surface of walls, roofs, floors, truss etc including PVC insulated copper earth continuity conductor 1.5 Sqmm FRLS cable connected to common earth dolly including steel terminal boxes suitable for ,modular plate for accomodating the switches, sockets, regulators etc for one light / exhaust fan point controlled by one switch all as specified and directed. Note: Modular frame plate with match cover will be measured and paid seperately.

All as per item No 139 hereinbefore but for one 5A 3pin/ 5pin socket point on independent Board all as specified and directed.

All as per item No 139 hereinbefore but for One bell point controlled by one bell push all as specified and directed.

All as per Item No 139 hereinbefore but wiring complete with 2.5 Sqmm for 5/15A socket on independent board all as specified and directed.

All as per Item No 139 hereinbefore but one 3 pin socket outlet 15 Amps, independent with cable 4 Sqmm size for geyser all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module multipurpose all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed.

Buzzer, ding dong AC 230 volts, single pole all as specified and directed.

Frame plate with matching cover, one module plate all as specified and directed.

Frame plate with matching cover, two module plate all as specified and directed.

Frame plate with matching cover, three module plate all as specified and directed.

Frame plate with matching cover, four module plate all as specified and directed.

Frame plate with matching cover, six module plate all as specified and directed.

Ceiling rose 3 terminals PVC/ Poly carbonate isolated body including base block complete all as specified and directed.

LED light fittings 1 x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Decorative wall mounted type SS finish fixture with textured glass diffuser suitable for LED lamp with B22 base with all accessories including replacement all as specified and directed. Make; Havells Cat No. LHJE04104499 or equivalent of Philips / Bajaj / CG

LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down old unservicable exhaust fan and supply and fix exhaust fan with PVC body 300mm sweep including removing the existing old one and depositing to MES store yard for the safe custody of the item all as specified and directed.

Storage type (Vertical type) energy efficient electric water heater of capacity 25 Ltr complete with 04 Nos grouting bolts, nuts & washers, grouted on stone wall and making good disturbed grouted surface, thermoplstic body, neon indicator, safety valve etc including connecting pipes complete all as specified and directed. Note: Removed Geyser to be handed over to MES store for safe custody of the items.

Taking down copper / Aluminium sub main wiring of any size and runs complete and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good matching with existing colour to the disturbed surfaces of walls, floors etc all as specified and directed.

Sub main wiring using 2 runs of 6 Sqmm FRLS PVC insulated copper conductor 1100 volt grade conforming to IS specification drawn through and including PVC conduit along with 1 run of 6 Sqmm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed. Note: One run of PVC conduit, 2 runs of 6 Sqmm cable and 1 run 6 Sqmm cable will be measured as one unit.

Taking down old unservicable RCCB, MCB, DB of any size/ type/ ways complete and making good matching with existing colour to the disturbed surfaces of walls, floors etc all as specified and directed.

Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

MCB SPN 40 Amps Complete all as specified and directed.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (Junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, clamps etc all as specified and directed.

Supply and fix in replacement modular TV socket Co- Axial all as specified and directed. Make: Crabtree or equivalent

Cutting chases in concrete wall / stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good as per existing finishes, cutting not exceeding 20cm girth all as specifed and directed.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below the ground level connected to 25x4mm size galvanized strip as earthing strip by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including provn of necessary excavation and earthwork in any type of soil. PCC pit, RCC cover and 20mm bore medium grade watering pipe, water funnel with GI wire mesh, 40mm bore medium grade protection pipe, common salt, charcoal dust, returning filling in of soil, removal of spoil to a distance not exceeding 50mtr etc including testing on complettion all as specified and directed.

P K ENTERPRISES

sree devi construction