Loading
Loading…
Loading…
Tender ID
Tender Value
₹18.2 L
EMD Value
₹45,390
Closing Date
19 Feb 2026, 10:00 pmClosed
Ballari Urban Development Authority
K JAFFARVALI
Construction of Guest House behind BUDA Office, Ballari
BUDA/2025-26/BD/WORK_INDENT119
BUDA/2025-26/BD/WORK_INDENT119
Open
Buildings
Two Tender Document System(Two Cover)
BUDA Commissioner Office Ballari
7 documents required · 7 mandatory
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2020-2021 to 2024-2025 Mandating satisfactorily completed as Prime Contractor a similar Nature of work of Value not less than Rs.10.73 lakhs (to an extent of 50 percent of the cost of the work, for all works costing up to and Rs.100 lakh). Certified by the not below the rank of Executive Engineer and work done certificate should include the tender indent number.
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
KPWD Registration Certificate
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2020-2021 to 2024-2025 Achieved in at least Two financial years an average annual financial turnover of Rs.21.45 Lakhs. Certified turnover certificate issued by the Chartered accountant with UDIN Number
The contractor should have liquid assets and or availability of credit facilities of not less than Rs.6.44 lakhs Unconditional Credit line or Letter of credit or Certificates from Banks for meeting the fund requirement etc.,
₹500
₹45,390
4 Feb 2026
4 Feb 2026
21 Feb 2026
19 Feb 2026
Construction of Guest House behind BUDA Office, Ballari
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete : 100x58x1.90mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm
Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 122mm long, weighing not less than 99 g
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to giv...
Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Gate valve 32mm
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Open Conduit System Supplying heavy gauge PVC conduit pipe 32mm dia 2.5 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plu...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming toI...
Supplying and wiring adopting loop system in existing PVC Conduit /casingcapping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earthwire) FRLS multistrand PVC insulated copper wire (confirming to IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing surface mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/ C.C wall, including necessary rawl plugs, Machine/ NF sc...
Supplying and fixing surface mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/ C.C wall, including necessary rawl plugs, Machine /NF sc...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos. of machine screws, bolts nuts etc., complete on the existing PV...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary b supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing...
Supplying 6A flush type socket and 6A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying of 4 feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary len...
Extra length of GI pipe of class B 19mm dia for down rod.
Supplying And fixing of 6 amp Pendant Holder on existing switch board.
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capaci...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439-3 and IK09 tested as per I S/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitabl...
Supplying and fixing of 100 A 25 kA Moulded Case Circuit Breaker (MCCB) overthe existing wood/ panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior ...
Supplying 4mm thick white plastic plate and covering for junction boxes of size .110 mm conduit using necessary machine screws.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
119-KW-2_Others.doc
Tender Document • 3.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .