GENP-54/2019-20 REPAIR/ MAINT OF INTERNAL ELECTRIFICATION DISTRIBUTION BOARDS, MCBS , SUB MAIN WIRING AND OTHER RELATED WORKS OF CERTAIN OTM ACCNS IN TECH AREA , LGS SECTION , 140 MC DET, AFCNWP, IFS , CPRU AND JCOS/ORS MD ACCN IN CAMP AREA, MA

Amount

Taking down carefully unserviceable Aluminium point wiring (light, fan socket or power)complete with fitting such as switches, ceiling rose lamp holder, regulators, sockets, F/Tube/Sketch light fittings, wooden terminal box plastic laminated sheet cover, from T.W batten including T.W batten or PVC conduits including taking down of DB’s, meter board any type all as specified and as directed

Material and labour for point wiring with single core PVC sheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch.

All as per Srl item No. 2 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 2 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 2 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 2 above but one power point 6 pin 15 Amps socket out let but with 4.0 Sq mm stranded copper conductor cable PVC insulated including earth wire 4 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 2 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded sheathed copper conductor.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC casing and capping wiring on ceiling and roof duly ISI marked including Tee, GI screw, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch.

All as per Srl item No. 8 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 8 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 8 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 1.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

Supply and fixing for switch piano flush type 5 Amps, single pole one way complete, all as specified and directed by Engr-in-Charge. Make : Anchor, Cona, Havells.

Supply and fixing for socket out let 3 pin 5 Amps, flush type complete, all as specified and directed by Engr-in-Charge. Make : Anchor, Cona, Havells.

S&F for switch piano flush type single pole one way 15 Amps complete, all as specified and as directed by Engr-in-Charge. Make - Anchor/Cona/Havells.

Supply and fixing for socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing in replacement of switch socket combination, multistranded 2 in 1, 5 and 15 Amps, flush type complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/SSK

Supply and fixing in replacement of switch socket combination multistranded 5 in 1, 5 and 15 Amps, flush type complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/SSK

Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing in repairs electric ding dong bell, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing for flush type bell push, 5 Amps complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing for lamp holder, PVC/poleycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing for stepped type fan regulator 300 watt, 230 volts, 50 HZ, AC. Supply complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Rider.

Supply and fixing in replacemenbt modular switch 1 way 6 Amps one module complete all as specified and directed by Engr-in-Charge. Make: Anchor/Cona/Crabtree

Supply and fixing in replacement of modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge. Make:- Anchor/Cona/Crabtree

Supply and fixing in replacement modular switch one way 16 Amps, one module complete all as specified and directed by Engr-in-Charge. Make: Anchor/Cona/Crabtree

Supply and fixing in replacement modular socket 6amp/16Amps, combined pin type 02 module complete all as specified and directed by Engr-in-Charge. Make: Anchor/Cona/Crabtree

S&F in replacement of LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make :Havelles cat part No VENUSNEOHE2X2PLR18-42WLED857MOD+LEDDRIVER36V36WS, Wipro Cat Part No CRCO10R038HP57GL1 or equivalent in Philips.

S&F in replacement of surface mounting LED slim round down lighter 15Watt for AS/GB/POP celing round with high effeicient LEDs & glare free opal diffuser porch light 12 Watt complete all as specified and directed. Make - Havelles cat part No INTEGRANEOSURFACEDLS15WLED857S, Wipro Cat Part No LD80131xxx60SM or equivalent in Philips.

S&F in replacement of surface mounting LED slim square down lighter 12Watt for AS/GB/POP celing round with high effeicient LEDs & glare free opal diffuser porch light 12 Watt complete all as specified and directed. Make - Havelles cat part NoLHEAASP7UL1W012, Wipro Cat Part No LD81101xxx60SM or equivalent in Philips.

S&F for Indoor decorative T8 LED Battens - integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 Watt ,bipin holders ,connector block, with and including LED tube rod of 20 watt one No etc. complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete. Make - Havelles cat part No LUMILINEPLUSBS20WLEDD865SPCSS, Wipro Cat Part No LL20221xxx65AL1 or equivalent in Philips.

S&F for Indoor decorative T8 LED Battens - integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 Watt ,bipin holders ,connector block, with LED rod 10 watt one No etc. complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete. Make - Havelles cat part No LUMILINEPLUSBS10WLEDD865SPCSS, Wipro Cat Part No LL20111xxx65NE3 or equivalent in Philips.

Supply and fixing for LED bulb 12 watt in replacement of CFL 11/15 watt fixed in pendent holder/bulk head fitting. Make : Havelles/Wipro/Philips.

Supply and fixing in replacement for CFL 15 Watt 4 pin fixed in pendent holder/bulk head fitting. Make : Bajaj Crompton Greaves / Phillips.

Supply and fixing in replacement for CFL 11 Watt 4 pin fixed in pendent holder/bulk head fitting. Make : Bajaj Crompton Greaves / Phillips.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way, double door 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make : Havells DHDPSHODRW12 or equivalent in Standard/ Legrand/CG.

Supply and fixing for Vertical type load line distribution board, double door, 4 way, AC ,3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete. Make : Havells Cat Pt. No DHDLVDRWGOFO04 or equivalent in Legrand/L&T).

Supply and fixing for Vertical type load line distribution board, double door, 8 way, AC ,3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete. Make : Havells Cat Pt. No DHDLVDRWGOFO04 or equivalent in Legrand/L&T).

Supply and fixing for MCCB, 4 pole,100A ,10KA. Make : Havells Cat Part No. : IHLGST0100 or HPL/Indoasian

Supply and fixing for MCCB, TPN 125A, 16KA. Make : Havells Cat Part No. : IHLGST0125 or HPL/Indoasian

Supply and fixing for MCB, 4 pole,63A,10KA. Make : Havells Cat part No. : DHMGCFPF063 or HPL/Indoasian/Legrand.

Supply and fixing for MCB, TP 63A,10KA. Make : Havells Cat part No. :DHMGDTPF063 or HPL/Indoasian/Legrand.

Supply and fixing for MCB, TP 32A ,10KA. Make : Havells Cat part No. DHMGDTPF006-032 or HPL/IndoasianLegrand

Supply and fixing for MCB, SPN, 63 A ,10KA. Make : Havells Cat Part No. : DHMGCSNF063 or HPL/Indoasian.

Supply and fixing for MCB, SPN, 40A ,10KA. Make : Havells Cat part No. :DHMGCSNF040 or HPL/Indoasian.

Supply and fixing for MCB, SP, 6-32A ,10KA. Make : Havells Cat part No. : DHMGCSPF006-032 Legrand/L&T.

Supply and fixing for MCB, SP, 40A ,10KA. Make : Havells Cat part No. :DHMGCSPF040 or HPL/Indoasian.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

Material and labour for submain wiring with two single core 2.50 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 1.50 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

Material and labour for submain wiring with two single core 4.0 sq mm PVC insulated FRLS multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-In-Charge.

Material and labour for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

Material and labour for submain wiring with two single core 10 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engr-In-Charge.

Supply and fixing in replacement of Electronic ballast 36/40w, 230 volt, suitable for T5/T8 lamp complete. Make : Havells Cat Part No : LHBF02904025 or equivalent in Surya/Wipro/Philips.

Supply and fixing in replacement of Electronic ballast 28 w, 230 volt, suitable for T5/T8 lamp complete. Make : Havells Cat part No :LHBF11128032 or equivalent in Surya/Wipro/Philips.

Supply and fixing in replacement of Electronic ballast 2x 36 w,230 volt, suitable for T5/T8 lamp complete. Make : Havells Cat Part No : LHBF07104027 or equivalent in Surya/Wipro/Philips.

Supply and fixing in replacement of Electronic ballast 1x14 w,230 volt, suitable for T5/T8 lamp complete. Make : Havells Cat part No : LHBT01114031 or equivalent in Surya/Wipro/Philips.

Supply and fixing in replacement of Electronic ballast 2x 14w,230 volt, suitable for T5/T8 lamp complete. Make : Havells Cat part No : LHBT01214040 or equivalent in Surya/Wipro/Philips.

Supply and fixing in replacement of copper ballast suitable for 240 volt,36/40 w flourescent lamp complete. Make : Havells Cat part No : LHBF19004011 or equivalent in Philips/Crompton Greaves.

Supply and fixing in replacement of copper ballast suitable for 240 volt,11/13 w flourescent lamp complete. Make : Havells cat Part No : LHBC19013018 or equivalent in Philips/Crompton Greaves.

Supply and fixing in replacement of starter for Electronic ballast 36/40W 230 volt, suitable for T5/T8 lamp complete.

Supply and fixing in replacement of CFL lamp 1x36W ,4 pin "L" type,white colour with base 2G11 complete. Make : Havells/Crompton Greaves / Philips.

Supply and fixing in replacement of flourecent tube light lamp 28W T5 complete. Make : Havells/Crompton Greaves / Surya.

Supply and fixing in replacement of flourecent tube light lamp 14 W T5 complete. Make : Havells/Crompton Greaves / Surya.

Supply and fixing in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed by Engr-In-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exc. 1.5 Mtrs deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge

M&L for sand cushioning to under ground cable provided with a layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete all as specified and directed by Engr-In-Charge.

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ bricks laid dry flat complete all as specified.

Taking out old unserviceable LT under ground cable any type from trenches,pipes & poles complete all as specified.

Supply and laying for 16 sqmm 4 core, LT, XLPE insulated under ground 1100 volt grade cable with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and directed by Engr-In-Charge.

All as per srl item No. 72 here-In-before but 25 sqmm 4 core.

All as per srl item No. 72 here-In-before but 35 sqmm 3.5 core.

M&L for 40 mm bore galvanised steel tube, light grade with all fitting complete laid in trenches or in poles complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 75 here-In-before but 50 mm bore.

M&L in replacement of PVC insulated service cable flat or round sheathed, aluminium, multistranded conductor 1100V grade size 16 Sq mm 2 core complete all as specified and directed by Engr-in-Charge.

All as per srl item No 77 here-in-before but of size 10 Sqmm 2 core.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement of LED building light 45 watt IP66 with internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5 Sqmm cable complete all as specified and directed. Make:- Havells Cat Part No. ENDURAPEARLNEOSL45WLED757SASYTOPC, Wipro Cat Part No LR02501xxx57xx or equivalent in Philips.

M&L in replacement of GI pipe medium grade 40mm dia bracket not less than 1.5Mtr long and bend to shape for fixing of building security light fitting including MS clamps made out of 25x6mm MS flat including 04 Nos. Fully threaded bolts and nuts fixing on wall etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of LED post top 25 watt IP65 with internally pre-wired including electronic driver and connecting up with three core flexible copper conductor 1.5 Sqmm cable complete all as specified and directed. Make:- Havells Cat Part No. RUBYPT25WLED757PSYMTOPC or equivalent in Wipro/Phillips.

NOTE :- MOU : (a) The quantities for item No 27, 30, 39, 65, 80 & 82 for schedule 'A' will have a MoU with any of the make listed in Sch 'A' Part-I (b) The Contractor will upload the MoU that the company is ready to supply requisite quantity to department and provide sale invoice to the department in original. The company will also undertake guarantee for its quality and quantity to be supplied. (c) In case, the vendor fails to upload the MoU, his technical bid will be completely rejected.

M/S V.D.ENTERPRISES

New Era Engineers

M/S ANIL KUMAR

SNOWY ENGINEERING INC

SAMIYA ENTERPRISES