Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC Accepting being lowest | |
| 2 | L2₹35.2 L+₹38,658.50 (1.11%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | L3₹35.5 L+₹69,456.50 (2.00%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest | |
| 4 | L4₹36.5 L+₹1.7 L (4.79%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L4 | Rejected-Finance Rejected being other than lowest | |
| 5 | L5₹37.7 L+₹2.9 L (8.30%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Pramod Kumar Tripathi
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
Provn of Hard Standing, 30 Men Toilet Block and Bathing Tank including services at MIC and S under GE (S) Ahmednagar
2022_MES_560784_1
8919/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹95,000
Yes
29 Nov 2022
1 Nov 2022
24 Nov 2022
1 Nov 2022
22 Nov 2022
15 Nov 2022
1 Nov 2022 - 8 Nov 2022
Amount
Excavation over areas not exceeding 1.5m depth for foundations etc and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil ( soft/loose/hard/dense soil) complete all as specified and directed.
Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.
Removing excavated soil to distance exc. 250m but n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.
M&L for hardcore of broken stone, guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.
M&L for hardcore of broken stone, guage exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.
M&L for PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in foudation, filling and mass concrete complete all as specified and as directed.
M&L for PCC, 1:3:6, type C1, using 20 mm graded stone aggregates in coping including necessary formwork, weathering, slightly rounded or chamfered angles and throating all as specified and as directed.
M&L for PCC, 1:3:6, type C1, using 20 mm graded stone aggregates in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain channels 30cm inner girth in cement concrete using extra cement including necessary forms, moulds, mitred/stopped ends all as specified and as directed.
M&L for precast cement concrete, 1:3:6, type C1, using 20 mm graded stone aggregates as in window or door cill, quoin blocks for use with masonry, copings, apex stone, pier caps, kerbs etc set in cement mortar 1:4 complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4, type B1, using 20mm graded stone aggregates as in cover slabs etc and like including moulds, forms etc complete all as specified and as directed.
M&L for RCC M-25, design mix, as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.
M&L for RCC M-25, design mix, as in columns, pillars, piers, posts and struts all as specified and as directed.
M&L for RCC M-25, design mix, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.
M&L for RCC M-25, design mix, as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.
M&L for RCC M-25, design mix, as in chajjas etc and like all as specified and as directed.
M&L for precast cement concrete block masonry with solid block of PCC (1:5:8) , exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to sides of slabs and similar work; exc 10cm but not exc 20cm wide for rough finished flat surfaces of concrete flat all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to chullah hoods, chajja, troughs and similar items including edges etc. for rough finished flat surfaces of concrete all as specified and as directed.
S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.
S&F factory made, solid PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panellng of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed to frame complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube and fixed in opening all as specified and as directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.
S&F 150mm long aluminium barrel tower bolt of extruded section all as specified and as directed.
S&F 150 mm size aluminium handle, anodised, fabricated type all as specified and as directed.
S&F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.
S&F pressed steel doors frames of size 105 mm x 60 mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.
S&F mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
All as per serial item No 37 but 6mm to 8mm dia.
All as per serial item No 37 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
S&F factory made, mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F mild steel windows/ventilators, fixed type with glazing bars complete all as specifed and as directed
M&L for framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 (Gde-E-250) quality-A complete all as specified and as directed.
M&L for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE all as specified and as directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base all as specified and as directed.
M&L for 100mm thick plain cement concrete, 1:2:4, type B1 using 20 mm graded stone aggregates as in hard standing, finished the top surface even and fair all as specified and as directed.
Forming construction joint 30mm deep x 10mm wide, filled with sealing compound grade 'A' all as specified and as directed.
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for 20-25 mm thick machine cut kota stone flooring, (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.
M&L for 20-25mm thick machine cut Cudappah stone slabs as in shelves etc and like laid, bedded and jointed in cement mortar 1:4 complete all as specified and as directed.
M&L 18-20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edge, laid over and including 10mm thick backing coat in cement mortar 1:4, jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for coloured glazed ceramic tiles 7 mm thick (plain or printed), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as on vertical surfaces like dado, skirting etc, laid over and including 10 mm thck backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.
M&L for 60 mm thick, factory made precast cement concrete interlocking tiles/paver blocks (glossy finish/ rubber mat finish) of M-35 grade, conforming to IS-15658-2006, hydraulically pressed, grey colour with pigments, as in floor, laid over & including 25 mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed. Note : Size, shape & pattern of tiles shall be as decided by GE.
M&L for water proofing treatment to RCC roof slab, including parapet, comprising with the following treatment/specification from bottom to top:- (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.
Supply only water proofing compound, ISI mark as aproved by GE all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.
M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth with sagol finish complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished surfaces even and smooth without using extra cement all as specified and as directed.
M&L for rendering 5 mm thick in cement mortar 1:4 on fair faces of concrete surfaces as in ceiling, finished surfaces even and smooth without using extra cement all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer all as specified and as directed.
M&L for 3 mm thick sheet glass, ordinar quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed
M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed
M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, tripple layer, hoisted and fixed in position including 25 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball(minimum weight 210gms) and fixed complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 5000 litres capacity, tripple layer, hoisted and fixed in position including 25 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball(minimum weight 210gms) and fixed complete all as specified and as directed.
S&F vitreous china bowl urinal, flat back of size 465 mm x 355 mm x 265 mm, white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader of PTMT, any colour for fixing with 15 mm dia pipe. (minimum weight 60 gms) all as specified and as directed.
S&F vitreous china wash hand basin, white, flat back, size 550 mm x 400 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.
S&F vitreous China, white, squatting pan, Orissa pattern of size 580MM x 440 mm width with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.
S&F vitreous china wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors (open or concealed type) etc complete all as specified and as directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors (open or concealed type) etc complete all as specified and as directed.
S&F 25mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors (open or concealed type) etc complete all as specified and as directed.
S&F 450mm long PVC connections for 15 mm bore with PTMT nuts complete all as specified and as directed.
S&F 15mm bore stop cock, cast copper alloy, fancy type, screwed down, high pressure with capstan head, cup and concealed type screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.
S&F tubular towel rail, brass chromium plated, 20 mm dia `D' type, 60 cm long between flanges all as specified and as directed.
S&F bib taps, 15 mm dia, cast copper alloy chromium plated with capstan heads, fancy type, screwed down for iron pipe or for brass ferruleand fixed all as specified and as directed.
S&F brass chromium plated health faucet (Hand shower) with 1200mm long guarded flexible tube screwed one end, suitable for 15mm bore connection, wall mounted with and including hook for hanging arrangement all as specified and as directed.
M&L for 200 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.
M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 200 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.
S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.
S&F grating doom 100mm dia PTMT (minimum weight 25gms) all as specified and as directed.
S&F 40mm bore low density Polyethylene pipes (LDPE) of pressure rating 6Kgf/Sqcm, fixed to walls, ceiling or laid in floors complete all as specified and as directed
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to walls complete all as specified and as directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to walls complete all as specified and as directed
S&F 75 mm bore PVC (SWR) bends with access door all as specified and as directed
S&F 110 mm bore PVC (SWR) bends with access door all as specified and as directed
S&F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
M&L for Soakage well, size 3.6m internal dia and 4.5m effective depth as per Typical Details drawing No. CEPZ/2004/TD/08 complete all as specified and as directed. Note : 1. For detailed specification refer PS Clause No. 23.0 on serial Page No 129 of tender documents 2. Internal dia of soackage well shall be 3.6m in lieu of 1.2m shown in TD drawing. Rest all as per drawing.
M&L for Septic tank for 50 users as per TD Drawing Nos CEPZ/88/TD/17M Sheet 1/4 to 4/4 complete all as specfied and as directed. Note : 1. For detailed specification refer PS clause No 24.0 on serial page No 129 of tender documents
M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTES :- 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. 3.Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.
All as per serial item No. 96 but for one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per serial item No. 96 but on independent board.
S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts white finish all as specified & directed.
S&F socket outlet, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
S&F lamp holder, angle/batten type, PVC/Polycarbonate type with back plate suitable for batten fittings.
S&F ceiling rose, surface, PVC, 50mm dia 3 terminals including PVC mounting block white/ivory finish.
S&F square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 3 core sheathed copper conductor cable of size 0.5 sqmm complete all as specified and directed.
S&F sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.
S&F MCB SP, AC, 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.
S&F MCB SPN, AC, 240 V, 40 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of lugs etc complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with 8mm dia mild steel TMT bars @ 100mm centre to centre both way and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.
S&F 300 mm sweep, exhaust fan, metal body, AC single phase, 230/ 240 V with louvers including making round hole of size 300mm dia in any type of wall and making good to match the surrounding area complete all as specified and directed.
S&F security light of building with single piece new generation energy savng and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminim cable all as specified and as directed.
S&F HDPE pipe (PE 63 IS 4984-2016) 50 mm bore for laying of LT cables etc complete with all accessories complete all as specified and as directed.Make:
Supply, laying and testing cable XLPE, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core all as spesipied and as directed.
S&F 40mm, GI tubing medium grade, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, Washing out complete all as specified and as directed.
S&F 40mm gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.
S&F 25mm gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.
M&L for cutting/ drilling existing pipe line & taking branch connection complete including all necessary GI fittings, jointing materials, earth work etc all as specified and as directed.
M/s. A P INFRA
M/s A D Mutha
Vinod Enterprises
M/s Automech Engineering
M/s Jeet Construction
M/s. N D Karande
AMAR CONSTRUCTION
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .