WBPHED/EE/BMD/NIeT-16 OF 2024-2025/1

Amount

PART-A

Supply, Delivery and storage at site of Horizantal Split cashing Clear water Centrifugal Pumping Machinary with base plate flexible coupllng, coupling guard, foundation bolt etc. other Accessories etc. having the following specification and as per technical Specifications given in NIT N.B- H-Q curve has to be submitted during the delivery (1W+1S)

a) Discharge : 310M3/Hr, Total Head : 110 mtrs.

Supply, Delivery and Storage at site of suitable capacity Horizontal Foot Mounted solid shaft Induction Motor (IE 4 type) suitable for the pump duty mentioned above with adequate margin as per detail technical specification given in NIT. N.B-No load as well as short-circuit Test Certificate of induction motor during test run has to be submitted during the delivery.

Supply, Delivery and storage at site of Horizantal Split cashing Back wash Centrifugal Pumping Machinary with base plate flexible coupllng, coupling guard, foundation bolt etc. other Accessories etc. having the following specification and as per technical Specifications given in NIT N.B- H-Q curve has to be submitted during the delivery (1W+1S)

a) Discharge-200 M3/Hr Total Head : 20 mtrs

Supply, Delivery and Storage at site of suitable capacity Horizontal Foot Mounted solid shaft Induction Motor (IE 4 type) suitable for the pump duty mentioned above with adequate margin as per detail technical specification given in NIT. N.B-No load as well as short-circuit Test Certificate of induction motor during test run has to be submitted during the delivery.

Supply & delivery at site following Valves

CIDF single door swing check NRV rating as per IS:5312 Part– I , and as per technical Specifications given in NIT

DN 150 mm (P.N.–1.0) (for Back wash individiual delivery header)

DN 200 mm (P.N.–1.6) (for H/L individiual delivery header)

CIDF non-rising Sluice Valve generally conforming to IS 14846 as per technical Specification given in NIT

DN – 200mm (P.N-1.0) (for Back wash Suction Line)

DN – 250mm (P.N-1.0) (for Clear water H/L Suction Line)

DN – 400mm (P.N-1.6) (for Clear water H/L Common delivery header)

Supply and delivery of three phase actuator operated wafer type butterfly valve as per Bs-5155 and as per technical Specification given in NIT

DN 80 mm (PN-1.0) (For Dewatering Pump delivery header)

DN 150 mm (PN-1.0) (For Back wash delivery header)

DN 200 mm (PN-1.6) (For H/L individual delivery header)

Supply delvery at site and storage of Ductile iron Tamper Proof Single Orifice Air Release Valve of DN 50 as per relevanl lS Standard

i) DN 50 for H/L Commn delivery header)

Supply, delivery & storage and installation at site M.S fabricated dismantling joints with rubber compression ring and adjustable follower flanged complete assembley with galvinised stud and nuts, as per technical Specifications given in NIT

DN: 200 mm (P.N–1.0) (for Back wash Suction line)

DN: 150 mm (P.N–1.0) (for Back wash delivery line )

DN: 200 mm (P.N–1.0)(for Back wash Commn header )

DN: 250 mm (P.N–1.0) (for H/L Suction line)

DN: 200 mm (P.N–1.6) (for H/L individual delivery line )

DN: 400 mm (P.N–1.6) (for Commn delivery header )

Supply, delivery & storage at site M,S Pipes for individual pump suction & delivery line from pump discharge upto common delivery header, M.S flanges, bends, specials, etc. as required to make the installation of delivery and common delivery header of pumping machineries complete in all respects up to the satisfaction of E.I.C.and as per technical Specifications given in NIT i) For Clear Water Pump & Back wash Pump

Supply delivery and storage at site of full bore Electromagnetic Flow Meter with remote indicator cum totalizer unit and cable between the meter and indicator as per technical specification

i) DN: 400 (for H/L Common Header header)

Supply, delivery & storage of Gleeserine type pressure gauge, cast Al. dial along with DN-15 GI impulse line with valve.

i) (0 – 10 Kg.) 102 mm dia for individiual delivery header

ii) (0 – 10 Kg.) 150 mm dia for Common Header

Supply, delivery & storage of Gleeserine type Compound gauge, cast Al. dial along with DN-15 GI impulse line with valve.

i) (+1 – 1 Kg.) 102 mm dia for individiual Suction line

Supply, delivery and storage at site of following L.T cables

300 Sq. mm x 2 nos 3.5 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). From PDB to MCC

185 Sq. mm 3 core, 1.1 KV grade, Al.Ar XLPE cable conforming to IS : 7098 (Part – I). a) 2 nos H/L motor x 60mtr =120 mtr

25 Sq. mm 3 core, 1.1 KV grade, Al.Ar XLPE cable conforming to IS : 7098 (Part – I). a) 2 nos Back Wash motor x 60mtr =120 mtr

1.5 sq mm , 12 core , 1.1 KV Grade XLPE Copper Armoured control cable as per relevent IS. a) For H/L 4 nos actuater x 30 mtr= 120 mtr

10 Sq. mm 4 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). For PDB to Gaseous Chlorine Room

6 Sq. mm 3 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). For MCC to Dewatering Pump

4 Sq. mm 2 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). For MCB to Out door light i) At P.H- 100mtr ii) At Gas Plant- 100mtr

N.B- Purchase of all cables should be as per actual site requrement

Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt PDB Panel having required Feeders as per technical Specifications given in NIT

Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt MCC having required Feeders as per technical specification given in NIT

Supply delivery and storage at site of Ultrasonic type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per technical Specifications given in NIT

Supply, delivery at site and storage of vacuum operated gaseous chorination system of capacity 0-2kg/hr (1W+1S) along with ali equipmenis instrument and accessories & Making Neutralization system of above gaseous chorination system along with all equipmenis instrument and accessories and as per technical Specifications given in NIT

Making Neutralization Pit for above gaseous chorination system as per technical Specifications given in NIT

Supply & delivery at site horizontal type centrifugal self priming non-clog dewatering pump with horizontal type 3.7KW, 415V ,50 Hz , three phase squirrel cage IE4 Induction motor including supply of channel base frame ,coupling and coupling guard complete set Discharge capacity : 10 LPS to 1.9 LPS Total Head :20 mtr-32 mtr, 29rpm. Suction/delivery- 80mm/80mm

Supply and delivery at site 80mm dia G.I pipe. With fittings i.e- Elbow, Union, Nipple. G.M Ball valve. C.I Foot valve etc for making suction and delivery line for dewatering pump.

Design, manufacturing and supply of 5MT capaciy x 10 mtrs Span approx x 6.5 mtrs. Lift single glrder construct on Hand Operated Over Head Travelling monorail compleie with indef brand Triple Spur Gear Chaln Puley Bock and Geared Travelling Trolley including supply of Steel Gantry Girder wilh 40mm square rail suiable for the above crane for total length of 14 x 2 = 28 mtrs. The bay length shal be 14 mtrs. (approx)and suppoting disiance for the steel gantry grder shall be 4.0 mtrs. max. The Crafe shall be des gned for class-1 duty indoor operation conforming to lS:807, lS:3177 and lS;3832. The Crane and Gantry Dirder shall be supplied at site duly painted with two coats Red Lead Primer. as per technical Specifications given in NIT (Test and Guarantee Certificate have to be supplied at the time of delivery)

Supply delivery of outdoor type LED light fixture Operating Voltage 140V-270 V AC 50Hz ,LED light fixture having LM6 pressure die cast Al. housing pot optical reflector and heat resistant toughened Polycarbonate/ Glass cover complete set. M.No-BRP409 LED115 CW SLC FG PSU GR V2 of Philips make or equivalent model. i) at Pump House ii) Meter Room iii) Chlorine Room

Supply delivery & fitting fixing of Indoor type LED light fixture Operating Voltage 140V-270 V AC 50Hz , with PDC housing & toughened glass suitable for ceiling (Surface/Suspended) mount & available in Wide beam (Rotational Symmetric) optics.EnduraLED Midbay Robust & reliable IP66 & IK08 protected LED midbay M.No-BY150P LED76S CW PSU HE SY120 FG GR (Make Philips/equivalent model) i) For Pump House ii) For PDB Room

Supply delivery 80mm dia M.S Black pipe Medium (Class B) as per IS:1239 PART-1 (2004). i) 1.5 mtr long each x 10 nos = 15mtr (For holding Arm at Pump House Roof)

Supply delivey of 1.5 mtr. long M.S Arm bracket made out of 40 mm dia MS pipe with painted anticorrosive paint .

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting 250 x 250 x 100mm

PART-B ( Intallation)

Installation of all items mentioned as in PART A (1 to 26) including supply of all erection items, as required for installation of Submersible pumping machineris & Centrifugal pumping machineris , all valves, delivery pipe line, PDB cum MCC panel, Chlorine system, cable tray, indoor & outdoor light, laying of cable on cable tray including supplying all necessary items i.e- nut & bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header with H/L rising main, suporting piller and paining anticorrosive paint etc. including cost of gas cutting, welding etc. as required for complete the installation as per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC.

Supply, delivery Fixing at site G.I cable tray for laying of power cable and G.I Perforated cable tray for laying of control cable at Pump House having proper M.S. structural support as per technical Specifications given in NIT

Earthing & lightning protection for Pump House, electrical installation as per ISS and IE rules and as per technical Specifications given in NIT (2 nos Earth pit for each intallation)

Internal wiring and Lighting arrangement including internal illumination of pump house building. as per technical Specifications given in NIT i) at Pump House ii) Gaseous Chlorine Room

Supply delivery and installation at site and storage of safety equipment like 6.5 kg Co2 squeeze grip type capacity Fire Extinguisher , sand bucket with bracket , rubber mats, shock treatment chart and first aid box, complete as per technical Specifications given in NIT

Cost of filling of 100kg baby empty cylnders from authorised liquid chlorine refilling station including charges of testing of cylenders, transpotation etc all complete as per technical Specifications given in NIT (4 nos cylinder)

Making Masonry Cable Trench for laying HT & L.T Cable as per site requrement & other civil works as per technical specification

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earth work in excavation of foundation trenches or drain in all sorts of soil ( including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoil with in a lead of 75 m as directed .The item includes necessary a) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

Filling in foundation or plinth by silver sand in layer not exceeding 150mm as directed and consolidating same by thorough saturation with water ramming complete including cost of supply of sand.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

(b) In superstructure, ground floor

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. i) Pakur variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc. including supply of rods initial straightening and removal of loose rust ( if necessary ) cutting of requisite length ,hooking and ben a) For works in foundation basement and up to roof of ground floor / up to 4 meter. i) Tor steel/Mild steel. ( SAIL/ TATA/ RINL)

Plaster ( to wall, floor , ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating nosing and drip course where necessary (Ground floor).[Excluding cost of chipping over concrete surface] a) With 1:6 Cement mortar ( 25mm thick )

Neat cement punning about 1.5mm thick in wall. dedo, window sill floor etc Note- Cement0.152 Cum per 100sqm

Moveable Galvanized plain sheet Pit cover M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Galvanised plain sheet works (excluding supporting framework) fitted and fixed with 6 mm. dia J or L hook-bolts and nuts, sheet-bolts, limpet and bitumen washers and putty with 150 mm. end lap & 50 mm minimum side lap complete. (a) In roof: with 0.63 mm. sheets.

Supply delivery arrd storage at site of caustic Soda Flskes as per IS-252-20L3 {@300 kg,/site}

Supply and delivery of 2(Two) nos Colored cast Plastic Chair & 1(one) nos rectangular foldable potable table as per technical specication given in NIT

Supply delivery of 500 mm dia 230 volt sweep AC Padistal fan with complete with all accessory (Make Havelles/Poler/Bajaj)

Testing & Commissioning of the entire installatione Pumps Motors Valves, LT Panels cables earthing Gaseous Chlorination System flowmeter and HOT Crane elc as per direction and upto the satisfaction of EIC in compliance with NIT specification

Trial run of pumping machinery, through PLC / Automatic panel also operation of Pumping machineris, Gaseous Chlorinator, including operation of valves if required and guarding of installation for engaiging 6(Six) persion as per direction of E.I.C. (90days)

Add: 18% GST

Add: 1% Cess

DEY ENTERPRISE (BID ID -6055863)

ORIENTAL ENGINEERING CO. (BID ID -6046930)