REPAIRS TO CERTAIN ROADS AND ROAD FURNITURE AT AF STN ARJANGARH UNDER AGE (AF) AYANAGAR UNDER GE (AF) GURGAON

Amount

M&L preparing black top surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by the Engineer-in-Charge.

Repairs to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal (including supply of road metal) rolling and well ramming surface of road complete all as specified and as directed by the Engineer-in-Charge.

M&L 30 mm thick consolidated thickness Bituminous Premixed semi dense ashphaltic concrete with 5.5% binder content by weight of total mix laid with self propelling mechanical paver and hot mixed plant, rolled and compacted to required camber and gradient with power roller using paving bitumen VG-30 over and including a tack coat of bitumen VG-10 (paving)applied evenly @ 5kg/10 Sqm to existing black top surface complete all as specified and as directed by the Engineer-in-Charge. Note:- (a) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the contractor and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% givne herein above shall be provided. (b) The premix semi-dense asphltic concrete shall be procured form computerized hot mix plant as approved by GE. (c) The vintage of sensor paver shall not be more than 05 years

M&L premix bituminous macadam using paving bitumen grade VG-30 with bitumen content @ 4% by weight of total mix using hot mix plant and mechanical paver laid/rolled and compacted to required gradient and camber with 8-12 ton power road roller and rolled to a uniform smooth surface (consolidated thickness 75mm or less) complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n exc 10cm wide on roads pavements with hot applied thermo platic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of medal No DA 972.0 fixed with and incl MS Stud of suitable size as per manufacture instructions

S&F in repairs solar cat eye aluminium alloy shall (100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed

S&F in repairs metal tublar dealineator made out ofn ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out ofn PMMA and mounted on 45/50 mm dia mikd steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 completed all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and as directed.

M&L for 25 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking paver Block with Grey cement and pigment any shape and size confirming to IS-15658-2006 of 80 mm thick, M-40 grade to match with grey cement and pigment etc complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for preparing new concrete surface and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and as directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,760.00

R K GOEL ABHEY KUMAR JAIN

Som Builders