Establishment of Cafeteria at District Hospital Bandipora. (Prefabricated).

Dewatering discharged water in well foundation using pumps and disposing off inc all carraige and costs complete as desired by EIC.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil

Providing and laying Stone solling including compacting, watering including all carriages of material complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing & laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 20 mm nominal size) and curing complete

Centering and shuttering including strutting propping etc. removal of form work in Foundations, footings, bases of columns etc. for mass concrete including all cost and carriages involved complete.

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars.

Providing and laying Boulder /GSB / Sand filling including all carriages of material complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate.

Providing and laying Anti skid floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 500x500

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc Inc all necessary fittings complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded including soffits and eaves boarding.

Providing and fixing of GS roofing including cost of screws, etc in roofs, walls, gables,ridges,valleys etc complete as per directions of engineer in charge.

Providing and fixing of fabricated structure wall panels 60 mm thick, with 0.50 mm hard dipped galvanized steel sheets on both sides with 50 mm thick layers of rigid CFC free close cell polyurethene foam (PUF) insulation, (Density 40 kg ± 2 kg per sqm) including all carriage and lifts upto site of work complete job.

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss crossing GI wire.With resin bonded fiber glass wool with density 16 kg/cum

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm,12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks) , fixing of gypsum board/calcium silicate board to ceiling section

Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)

P/F of powder coated aluminium partion walls laminated inc glazing c/o of glass panes of req thickness with 12mm particke board on b/c extruded built up standard sections with req EPDM rubber all necessary fittings complete job

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and laying/fixing of 4 inch PVC disposal of prince quality Pipe including Tee, sockets,unions bends complete job

Providing and laying/fixing of 3 inch PVC disposal of prince quality Pipe including Tee, sockets,unions bends complete job

Providing and laying/fixing of 2 inch PVC disposal of prince quality Pipe including Tee, sockets,unions bends complete job

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. complete job. 25 mm nominal outer dia pipes.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing complete job. 32mm nominal outer dia pipes.

P/F of 75mm Dia Floor Trap complete job.

Providing and fixing of Stainless steel floor drain cover jali 5 inch Floor jali complete job.

Providing , installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent) including fixing with bolts and making necessary connections. 50 LITRES

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms jaguar or any approved

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.Jaguar or any approved

Providing and fixing of Wall Mixer of approved make like jaguar including all accessories complete.

Providing and fixing of Towel Rod 24" Long of approved brand and manufacture including all accessories complete.

Providing and fixing of CP Soap Case of approved brand and manufacture including all accessories complete.

Providing and fixing of water storage tank inc all accessories complete job

Carriage of materials by mechanical means transport from source to site of work incl loading & unloading complete job. i. Stone agg. 40mm & below for an average lead of 25 Kms

ii. Sand with an avg lead of 10 kms