REPAIR TO SEWAGE LINE, PATH, HARD STANDING AND COMPOUND WALL ETC AT SECTOR-28, 29 AND 30 AT CHANDIGARH

Amount

Dismantling/taking down AC, CI, & PVC rain water pipe (any size) including all fittings, head shoes, bends complete and removing from site from ground level all as specified and directed.

Demolition and breaking up drain pipes of 150mm internal dia (Salt glazed stone water or reinforced concrete) set in cement mortar complete all as specified and directed.

Taking down old broken cover slab (of any dia/description) of manholes etc set in cement mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving exc 15cm thickness (but above ground level) complete all as specified and directed

Demolition of brick or stone masonry work, built in cement mortar incl all quoinns, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, scrabing for key, scrubbing down with water tec complete all as specified and directed.

Dismantling of wrought iron mild steel work of any description or from nay position complete all as specified and directed.

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortor (1:6) complete all as specified and directed.

All as per serial Item No 9.00 above except bricks complete all as specified and directed

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan t any radius in half brick thick walls built in cement mortor ( 1:4) )complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick/concrete surfaces of walls mixed with water proofing compound and finished fair and even (without using extra cement ) complete all as specified and directed. (Note : WPC will be measured and paid separately)

Material and labour for rendering 10mm thick on fair faces of brick work surfaces in internal wall with CM (1:6) complete all as specified and directed.

Supply only integral water proofing compound.

Supply and fixing for 110mm dia PVC (SWR) rain water pipes single socketed, in any length with rubber ring joint fixed to wallall as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) water pipes single socketed, in any length with rubber ring joint fixed to wallall as specified and as directed.

Supply and fixing for 110 mm dia PVC shoe of approved make complete all as specified and directed.

Supply and fixing for 110mm dia PVC (SWR) bends any radius of approved make all as specified and directed.

Material and labour for 110mm bore PVC (SWR) junction singe (Single T) equal or unequal complete all as specified and directed.

Supply and fixing for of PVC (SWR) vent cowl for 75mm dia pipe complete all as specified.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete.

Supply and fixing of CI 100mm dia, sand cast, soil, waste and vent pipes, in any length with or without ears with cement joint fixed to wall complete all as specified and directed.

Supply and fixing of 100mm CI bends (any radius) with duck's foot or heel rest\ complete all as specified and as directed.

Supply and fixing for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

Supply and fixing of 150mm internal dia of salt glazed stoneware pipes laid in trenches complete all as specified and directed.

Supply and fixing of 150 mm salt glazed stoneware bends (any radius) of 150mm dia of bore diminishing pieces or tapers (large bore measured) complete all as specified and as directed.

Material and labour for providing precast RCC cover slab (1:2:4) type B-1 (for man holes, drain cover etc) (using 20mm graded stone aggregates) including necessary use and waste of formwork and set in CM (1:6) complte with joints to match all as specified and directed.

Material and labour for plain cement concrete type B-1 PCC (1:2:4) (using 20mm graded granite stone aggregate) as in benching of manholes, roof kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed

Materials and labour for plain cement concrete (1:3:6) type C2 using 40mm graded aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished to drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested completely surroundiung for 150mm bore of pipes with complete all as specified and as directed.

Material and labour for cutting to existing manholes for 150mm internal dia pipe making good to pipe and rendering, cutting out exiting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching complete all as required and directed.

Material and labour for cleaning & removing of sludge, soil, mud etc from sewage pipe lines including manholes by rodding using MS rod tied with jute/gunny bags between manhole to manhole and flushing down with water removing the sludge to a distance n.exc 50 mtr away from the starting point depositing in pits n.less than 30cm from existing ground level including sprinkling with bleaching powder over the area of pit & cleaned manholes complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth for foundation etc in soft/loose soil.

Excavation in post holes (or similar holes) each in soft/loose soil n.exc 0.50 cum getting out, returning filling in and ramming earth and making good surface complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified .

Material and labour for mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as speciffied and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns,plinth band, lintels etc hooking ends and binding with a including mild stell wire (annealed) not less than 0.90mm dia or securing with clips quality conforming all as specified and directed.

Supply and fixing of framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 Engineer-in-Charge.

Supply and fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Material and labour for fixing of 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified including dismantling.

Material and labour for preparation of new steel surfaces exceeding 10cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of brick wall, RCC fencing posts or structs surfaces and applying two coats of cement base paint over a coat of alkali-resistant primer paint complete all as specified and directed.

Material and labour for PCC (1:2:4) Type B-0 using (12.5mm graded stone aggregate) as in coppings as in brick wall duly rounded or chamfered on edges all as specified and directed.

Material and labour for 100mm thick cement concrete type B 1 PCC (1:2:4) (using 20mm graded aggregate) as in hard standing finished even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Material and labour for Glass dividing strips, 3mm thick of 38mm width complete all as specified and directed.

Material and labour for PCC chequered tiles with grey cement and pigment 20cmX20cmX25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 15mm thick screed bed CM (1:6) complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in plinth protection/floor/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mmgraded stone aggregates as in plinth protection/floor/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and any size confirming to IS-15658-2006 of thickness 60mm set with grey cement and pigment including 15mm thick screeed bd in CM (1:6) complete all as specified and directed

Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing of excavated materials (soils) to a distance n.exc 100 mtr and upto a distance of 250 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed

Material and labour for clearance and removing of bushes vegetation growth including taking out roofs of bushes/vegetation growth upto 30 cm deep and disposal of rubbish to a distance not exc 100m complete ll as specified and directed

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 500 & n.exc 1000 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 250 & n.exc 500 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Supply only galvanized steel rod set (set of 10 rods) dia of rods should not be less than 6.0 mm for cleaning of blockage/chocking of sewage line complete all as specified and directed by Engr-in-Charge.

infinity Services

KUMAR AND COMPANY

MS FUTEC ENGINEERS