Proposed Construction of Food Distribution and Dining hall in 10th sector 66th street in Division-137, Unit-28, Zone-10

Earth work excavation for foundation by Mechanica...2.40m Footing Depth. (including Refilling charges)

Providing and laying in position, standardised con...the Department for the excess usage of materials).

Supplying and filling in foundation, basement, etc...tion and as directed by the departmental officers.

Cement Concrete 1:5:10 (One cement, Five crushed ...partmental officers - Mixing by mechanical means

Brick work in following Cement Mortar using best q...Executive Engineer in charge. In Cement Morter 1:3

Plastering the surface of walls with Cement Mortar...d as directed by the departmental officers. (Wall)

White washing two coats with freshly burnt white s...lying with standard specification and as directed.

Painting the wall two coats with approved weather ...tion and as directed by the departmental officers.

UPVC Window Specification: Supplying and fixing UP...ved from the Executive Engineer before use on work

Manufacturing supplying and fixing of Fully ...tal officers. - Single leaf of size 1.00m x 2.10m.

Paving the floor with best quality vitrified Til...pproved by Executive Engineer before use on works)

Paving the floor with best approved quality fine p...e Executive Engineer concerned before use on work)

Providing and Fixing of polyurethane foam for Slop...specification. - 50mm (+38mm) thick PUF roof panel

Providing and Fixing of polyurethane foam as Inter...on. - 50mm thick PUF Internal Partition wall panel

Cost of supply of 20w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

A.C Exhaust Fan 375mm (15") sweep (Heavy duty)

Supply of 48" ( 1200 mm ) sweep size 5 star rating Ceiling fan with out regulator

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unshe...light point / fan point (for electronic regulator)

Supply and fixing of 5A / 15A 3 pin combined flush...cket with 15A flush type switch on suitable TW Box

Supply and fixng of TNEB meter board suitable for ...sulated copper wire with earth connection complete

Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 25mm

Supplying and fixing in position best approved of ...rtmental officers 110mm dia PVC Pipe for One Floor

Supplying and fixing in position 15mm dia b...Executive Engineer before use on the works) SD Tap

Supplying and fixing in position best quality and ...s).White Glazed Wash Hand Basin - without pedestal

Automatic Electrical Water Heater with copper cont... 35 Litres capacity 230V / 1000W (Higher End)

Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 40mm

Supplying and fixing in position white / colour gl...oved by the Executive Enginer before use on works)

Supply and providing 1000 litres capacity Priming Tank made up of PVC.

1.5 HP Jet Pump Set

Supplying and erecting in position of following li...tall the System in position and intact - 50 Litres

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING

Providing and fixing Stainless Steel Dishwasher Inlet Table Capacity: 600 Kg/hr (1200x700x960mm) (Including all charges etc.)

Providing and Fixing Stainless Steel Round Standing Dining Table (Including all charges etc.)

Providing and Fixing Food Distribution Table (6 x4 ) (Including all charges etc.)

Providing and Fixing Stainless Steel Rack(Including all charges etc.)

Providing and Fixing Stainless Steel Sitting Bench (dia 1 6 ) (Including all charges etc.)

Supplying and Fixing Name Board (Including all charges etc.)

Please Enable Macros to View BoQ information