Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.9 L+₹4.9 L (16.2%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹35.3 L+₹5.4 L (17.9%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NAVY LKD
Military Engineer Services GE(NAVY) Lakshadweep Kavaratti, UT of Lakshadweep
ADDITION ALTERATION TO WORK STATION OF ADMIN BLOCK, OFFICERS LIVING ACCOMMODATION AND PROVISION OF ALUMINIUM SHUTTERS FOR GARAGES UNDER AGE B R 2 MINICOY OF GE NAVY LAKSHADWEEP
2022_MES_541740_1
8333
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NAVY LAKSHADWEEP
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER NAVY LAKSHADWEEP
₹77,000
Yes
26 Dec 2022
29 Jul 2022
27 Aug 2022
29 Jul 2022
24 Aug 2022
10 Aug 2022
29 Jul 2022 - 9 Aug 2022
60 days
Amount
Supply and fix powder coated aluminium frame for doors, partitions, windows ventilators with one of more rebates incl joining cleat for fixing etc, complete all as specified and as directed by Engineer-in-Charge.
Material and labour 9 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium door shutters complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 5.5 mm thick tinted sheet glass and glazing with aluminium beading & rubber gasket in square in each panes complete all as specified & directed by Engineer-in-Charge.
Supply and fix 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber/ particle board frame work complete all as specified and as directed by Engineer-in-Charge.
Supply and fix brass handle bright polished cast type 75 mm size complete all as specified and as directed by Engineer-in-Charge.
Supply and fix telescopic channel of length 30 to 45 cm with rollers fixed to drawers or wooden work including screws and nuts complete all as specified and as directed by Engineer-in-Charge.
Supply and fix brass lock suitable for cup boards, grade 1, 65 mm size 4 levers fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully existing aluminium/copper wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets ,ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings,ceiling fans ,exhaust fans and regulators ceiling rose etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Point wiring with PVC insulated sheathed and multistranded copper conductor cable ISI marked, 1100 volt grade. FRLS of size 1.5 sqmm drawn in and including concealed PVC rigid conduite of size not less than 20mm dia with modular metal flush box concealed and modular white plates with frame of suitable size as required at site with PVC insulated sheathed stranded copper conductor of size 1.5 sqmm as earth wire connected common earth dolly as specified for one light point controlled by one switch for light/Fan complete all as specified and as directed by Engineer-in-Charge. Note : (i) Rate quoted should include cost of modular metal flux box concealed and making good walls (ii) Rate include the modular white cover plate with frame. (iii) Necessary blank plate as required at site.
All as per item No.11 here in before but one 3 pin 5 amps switch sockets on same board complete all as specified and as directed by Engineer-in-Charge.
All as per item No.11 here in before but one 3 pin 5 amps switch sockets on independent board complete all as specified and as directed by Engineer-in-Charge.
All as per item No.11 here in before but with cable size 2.5 sqmm and 2.5 sqmm as earthwire for 3/5 pin socket out let independent, 15/16 Amps complete all as specified and as directed by Engineer-in-Charge.
Material and labour Submain wiring with Two runs of 4.0 sqmm size multi stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 4.0 sqmm size multi stranded copper conductor PVC insulated and unsheathed for continious earth wire including all connections complete all as specified and as directed by Engineer-in-Charge. Note: 2 run of cable, 1 run of pvc conduit and 1 run of each wire shall be measured as one Rm length.
Supply and fix modular Switch and socket combination 3 pin 5 Amp AC 230 Volts piano flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular Switch and socket combination 6 pin 15 Amp AC 230 V complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular type switch 6 Amp single pole one way complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular type Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Ceiling rose three terminals polycarbonate , isolated body complete all as specified and as directed by Engineer-in-Charge.
Supply and lay and testing of 4 core 10 sqmm cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor including taking down unserviveable cable complete all as specified and as directed by Engineer-in-Charge.
Supply and lay burnt bricks sub class 'B' brick for cable protection complete all as specified and as directed by Engineer-in-Charge.
Material and labour for sand cushioning with Local Sand in two layer,first layer of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts for cable including consolidation of each layer complete all as specified and as directed by Engineer-in-Charge. Note:Punned Thickness of sand cusioning shall only be measured and paid.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out soft/loose soil for laying cables/pipes/erection of poles etc.all as per specification and upto the satisfaction and complete all as specified and as directed by Engineer-in-Charge.
Returning filling in, with excavated soils incl. spreading, levelling, watering and well ramming in layers n.exc. 25 Cms. all as specified and directed and upto the satisfaction and complete all as specified and as directed by Engineer-in-Charge.
Removing excavated material/ surplus soil exceeding 250 M and n.exc. 500M and depositing where directed at a level n.exc. 1.50M above the starting point upto the satisfaction and complete all as specified and as directed by Engineer-in-Charge.
Supply and fix ceiling fan 1200 mm sweep along with necessary fixing arrangements complete including all connections complete all as specified and as directed by Engineer-in-Charge.
Supply and fix exhaust fan 250 mm sweep made of PVC material with louvers incl making the hole on wall along with necessary fixing arrangements complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Surface and wall mounted LED 20Watt 4ft long batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with industrial grade heavy duty driver having THD<10% suitable pre wired and testing complete including all connections all as specified and as directed. Make: Havells Cat No ENDURALINEARNEOBS20WLED865SPCWH or its equivalent in Philips/Bajaj/Wipro/CG
Supply and fix Surface and wall mounted LED 10 Watt 2Ft long batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10% suitable pre wired and testing complete including all connections all as specified and as directed. Make: Havells Cat No ENDURALINEARNEOBS10WLED865SPCWH or its equivalent in Philips/Bajaj/Wipro/CG
Supply and fix fall ceiling light Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong / Grid ceiling. 120 lumen output of size 2 ft x 2 ft recessed mounted full open type to deliver extra ordinary lumens through its pure form and glare-less light complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No STRATO 2X2PLR36WLED840MODor its equivalent in Philips / wipro / Bajaj
Supply and fix LED 24 W building security light luminaire epoxy coated,energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No. ENDURAPEARLSL30WLED757SASYTOPCMP or its equivalent in CG/Wipro/Philips
Supply and fix in replacement MCB SPN 40 Amp 240 V, 50 Hz, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in replacement MCB SP 5 to 32 Amp, 240 V, B Series, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in replacement MCB DB SPN 12 way with 200 Amp copper bus bar double door type complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Earthing complete with galvanised steel plate electrode 600 x 600 x6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below ground level with top edge of earth plate at a depth 1.5mtr below ground level connected with galvanised steel strip of size 32 x 6 mm up to DB/main switch as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia light grade GI tubing, funnel, wire mesh, 20mm bore GI tubing medium grade watering pipe, including concrete pit in PCC 1:3:6 type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle of suitable size, charcole and slat in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing complete including taking down of unserviceable materials of old earthing all as specified and directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete all as specified and as directed by Engineer-in-Charge. Note: Complete removal of debris outside MD land.
Material and labour for rendering in 15 mm thick in cement mortar1:4, on fair faces of brick work, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Preparation of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat complete all as specified and as directed by Engineer-in-Charge.
Material and labour of 3 mm thick wall care putty on wall complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh ( G.I. wire mesh paid separately) complete all as specified and as directed by Engineer-in-Charge.
Material and labour GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste
Supply and fix Second class hard-wood clean sawn in as in scantling framedand fixed to walls with screws etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Second class hard-wood plain fillets, square, rectangular or trinagular in section, clean sawn secured with nails or brads, sectonal area n. exc 3 sqcm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MS 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in 150 mm long aluminium anodized handles cast type complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Providing precast cement concrete solid building blocks Type B1 1:2:4 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls,setting in cm 1:4 with joints to match includiung necesary excavation etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for reinforcement cement concrete nominal mix Type B1 1:2:4 (20 mm graded aggregate) used in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) provided fair finished concrete surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4. complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular switch, 1 way, 16A, 1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular socket, 6/16A, -2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular Fan Regulator, 120 Watt, 2 module, hum free complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MCB DB, SPN 8 way, double door, SPN 240 V with 200 A bus bar and separate link for common link for neutral and earth complete all as specified and as directed by Engineer-in-Charge. Note: Blank spaces of DB shall becovered with blank plate
Hanging only Ceiling fan and connecting up including provisin of cable from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge.
Supply and fix round type ultra sleek LED recessed down light with lumen output of 1000 lm including all connection complete all as specified and as directed by Engineer-in-Charge. Make: Philips cat part no DNO92B LED10S-6500 PSU WH or equivallednt in Havells/CG/Wipro.
Dismatling steel rolling shutters of any size and description inculding side gudies embedded in masonry wall complete all as specified and as directed by Engineer-in-Charge.
Fabrication, supply and fixing of extruded double wall anodised aluminium slat profile rolling shutter of varying widths, powder coated, manual controlled gear sytem (spring mechanism) inculding levers for lifting the shutters, hood cover etc. each slat width not less than 50 mm, along with all fittings inculding aluminium side guides /channel, aluminium bottom component, other accessories and suitable locking arrangements, fixed to mansonry wall surfaces as per manufacturers instructions and making good to damaged wall surfaces inculding plastering and painting works as necessary and making the exposed surfaces as per existing complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plan cement concrete, Type B-1 (1:2:4) using 20 mm graded aggregates as in lintels upto 1.5 Mtrs clear span, cills, steps, seismic and other similar bands, inculding necessary formwork as required, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 5 mm thick in CM (1:4) over 10 mm thick plaster in CM (1:6) on concrete surfaces and finishing the surface even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
R.K. Builders
Kurian And Varghese
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .