Tamil Nadu

Active

Works

Miscellaneous Works

TTPS MechII AHP Reconditioning the wornout Clinker Grinder assembly with modified Rollers for stage I II Bottom Ash Hopper

TNEB Limited

TTPS | Tuticorin, Tamil Nadu

Amount: Refer DocsCloses: 3 Oct 20266d left

Timeline

Published25 Sept 2026
Closes3 Oct 2026
Bid Opening5 Oct 2026

Tender Value

Refer Docs

EMD Value

₹9,500

Closing Date

3 Oct 2026, 2:00 pm6d left

Tender Inviting Organisation

Name

CE/TTPS

Address

Chief Engineer, Tuticorin Thermal Power Station, Tuticorin 628004.

Work Description

TTPS MechII AHP Reconditioning the wornout Clinker Grinder assembly with modified Rollers for stage I II Bottom Ash Hopper

Tender Information

Tender ID

2026_EB_707988_1

Reference Number

CE/TTPS/SE/M-II/No.96/2026-27

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

60 days

Location

TTPS

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per BQR conditions in NIT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredProof for EMD Remittance - Should be scanned and uploaded (.pdf)

RequiredPhotocopy for the proof of BQR No.1 - Should be scanned and uploaded (.pdf)

RequiredPhotocopy for the proof of BQR No.2 - Should be scanned and uploaded (.pdf)

RequiredPhotocopy for the proof of BQR No.3 - Should be scanned and uploaded (.pdf)

RequiredPhotocopy for the proof for GST registration - Should be scanned and uploaded. (.pdf)

RequiredDeclaration form and Sch-A on the letter head and signed with the seal-Should be scanned and uploade (.pdf)

Finance

RequiredSpec.No.CE/TTPS/SE/M-II/No.96/2026-27 (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹9,500

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

25 Sept 2026

Published

25 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

25 Sept 2026

Download Ends

3 Oct 2026

Submission Starts

25 Sept 2026

Bill of Quantities

Item WiseBoQ_Ver3.1INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Charges for dismantling the wornout complete assembly such as roller shaft, bearings, bearing housing, shaft seal housing, gland covers, wear plates and rollers bodies, etc., including hire charges for T&P and consumables etc.,	2	Nos	55	₹110
2	Charges for rebuilding the faces of grinding teeth 48 nos. to the specified dimension by using Eutectic-400 surface welding electrode and hard facing the teeth by using chromo card-6006 hard face welding electrodes and grinding the teeth for smooth finishing & the profile checking, including the cost of T&P hire, transportation, consumables etc.,	4	Nos	55	₹220
3	Charges for reconditioning the holes in the shaft seal housing to facilitate to provide water nipple and providing and fixing the new sleeves, water thrower & spacer, bearing on both ends of the housing, etc., including cost of all consumables, cost of SS 316 gr. Bushes, T&P hire, transportation etc.,	8	Nos	55	₹440
4	Charges for renewing the wornout shaft with newly fabricated shaft in the grinder roller and balancing the roller assembly including all charges such as cost of EN8 shaft (size:dia 110 mm, length – 2.6m) and shaft sleeve SS-2 nos.(size : OD- 119 mm, ID-102 mm, length-384 mm, thick – 8.5mm), machining, transporting, T&P hire charges and consumables.	4	Nos	55	₹220
5	Charges for reconditioning of clinker grinder glands by cutting, machining, boring holes, welding etc., including cost of cutting gas, welding rod, T&P etc.,	8	Nos	55	₹440
6	Machining charges for making key way 3 nos. to the required dimensions by milling operation, 3 nos. suitable keys (SS 316 gr.) including cost of material T&P hire charges etc.,	2	Set	55	₹110
7	Charges for assembling the clinker grinder with the new spares and providing the clearance for free rotation of the roller and taping all threaded holes and assembling the gland with clearance & completion of assembly including cost of the required consumables like MS bolts & Nuts, of various sizes-30 kg, M 16 x 125 SS bolt with nut and washer 8 nos, gland ropes-size 19mm, gland followers, rubberized asbestos gasket ( 5 mm thick) and all T&P hire, machining and transportation charges etc., including cost of material like bearing – 22222EK with sleeve H 322 - 4 nos, spacer SS 316gr – 4 nos, water thrower (neoprene rubber) – 4 nos., latern ring (bronze) – nos. etc., complete.	2	Nos	55	₹110

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.44 MB

Work Item Documents

BOQ_850858.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Charges for dismantling the wornout complete assembly such as roller shaft, bearings, bearing housing, shaft seal housing, gland covers, wear plates and rollers bodies, etc., including hire charges for T&P and consumables etc.,

Nos

₹110

Charges for rebuilding the faces of grinding teeth 48 nos. to the specified dimension by using Eutectic-400 surface welding electrode and hard facing the teeth by using chromo card-6006 hard face welding electrodes and grinding the teeth for smooth finishing & the profile checking, including the cost of T&P hire, transportation, consumables etc.,

Nos

₹220

Charges for reconditioning the holes in the shaft seal housing to facilitate to provide water nipple and providing and fixing the new sleeves, water thrower & spacer, bearing on both ends of the housing, etc., including cost of all consumables, cost of SS 316 gr. Bushes, T&P hire, transportation etc.,

Nos

₹440

Charges for renewing the wornout shaft with newly fabricated shaft in the grinder roller and balancing the roller assembly including all charges such as cost of EN8 shaft (size:dia 110 mm, length – 2.6m) and shaft sleeve SS-2 nos.(size : OD- 119 mm, ID-102 mm, length-384 mm, thick – 8.5mm), machining, transporting, T&P hire charges and consumables.

Nos

₹220

Charges for reconditioning of clinker grinder glands by cutting, machining, boring holes, welding etc., including cost of cutting gas, welding rod, T&P etc.,

Nos

₹440

Machining charges for making key way 3 nos. to the required dimensions by milling operation, 3 nos. suitable keys (SS 316 gr.) including cost of material T&P hire charges etc.,

Set

₹110

Charges for assembling the clinker grinder with the new spares and providing the clearance for free rotation of the roller and taping all threaded holes and assembling the gland with clearance & completion of assembly including cost of the required consumables like MS bolts & Nuts, of various sizes-30 kg, M 16 x 125 SS bolt with nut and washer 8 nos, gland ropes-size 19mm, gland followers, rubberized asbestos gasket ( 5 mm thick) and all T&P hire, machining and transportation charges etc., including cost of material like bearing – 22222EK with sleeve H 322 - 4 nos, spacer SS 316gr – 4 nos, water thrower (neoprene rubber) – 4 nos., latern ring (bronze) – nos. etc., complete.

Nos

₹110