PROVN OF OPEN SHED 18X10M STONE PAVED STANDING AND HARD STONE FLOOR FOR WASHING OF VEH (TKS) AT CHI UNDER AGE B/R-IV OF GE(S) MEERUT

Amount

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth for foundation etc or for shafts, wells, manholes etc not exceeding 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Material & labour plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for foundation etc complete all as specified and directed.

Material and labour moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for PCC type B1 (1:2:4) using 20mm graded crushed stone aggregate as plinth course ,copings, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Material and Labour for 10mm thick rendering on brick wall or concrete surface in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering, 15 mm thick on other then fair faces of brick or concrete surfaces in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour PCC (1:3:6) type C-1 (using 20mm graded agg) 75 mm thick as in apron/plinth protection , concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Excavation over area n.exe. 1.50 m deep & getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Material and labour for 200mm thick soling or sub base with broken boulders or quarried stone, interstices filled, surface formed, rolled and consolidated with 8 to 10 ton power roller to rquired gradient and camber complete all as specified and directed.

Material and labour for 150 mm thick (compacted thickness) water bond macadam((WBM) with coarse aggregate of grading 2 (40 mm to 63 mm size) or of grading 3 (20mm to 50mm size), granite, trap or basalt stones in two layer spread, rolled and consolidated with 8 to 10 ton power roller to gradient and chamber as required complete all as specified and directed.

Material and labour for granite , trap or basalt stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded on 20mm thick in cement screed mortar 1:3, with joints 20mm thick, grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed. Note. The sample of stone sett shall be approved by GE in writing before bulk supply.

Material and labour for edging stone to stone sett flooring with granite, trap or basalt stone of size 250 to 300 mm long x 150 to 200 mm wide and 450 mm deep and sides dressed ,bedded in CM 1:3 joints 20 mm thick grouted in CM 1:2 with an admixture of metallic floor hardner 5 % by weight of cement and struck flush pointing complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for RCC (Nominal mix) 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams and like complete all as specified and directed.

M&L for use and waste formwork to sides of cocrete foundation, footings, bases of column, rafts, plinth beams and similar work vertical or to batter for rough finished flat surface of concrete , complete all as specified and directed.

Material & labour for TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns hooking ends etc and binding with and including mild steel wire annealed less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 19.00 above but 05 mm dia and above in stirrups /rings etc complete all as specified and directed.

Material and Labour for mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

Supply and fix angle iron, flat iron, plates etc including cutting tops to shape as directed, drilling holes, notching for wire, etc, as in flat iron fillets, wind ties including all necessary drilling, bolting or riveting, etc, and smiliar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified.

Material & labour for preparation of steel and iron surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed copper conductor FRLS cable with and including rigid non metallic PVC concealed conduit of 25mm dia or higher, medium grade' with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes, 03mm thick bakelite sheet top cover including all cutting / chases etc in walls, making good the disturbed surfaces of walls, ceiling etc and applying two coats of white / colour washing / distempering etc to match the existing finishes and continuous earth wire of size 1.50 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi stranded, PVC insulated, copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One tube light/bulb/street light point controlled by one-way switch 5/6 Amps.

All as per serial item No 25.00 here in-before but with 3 pin, 05/06 amps socket outlet point on independent board controlled by one, one way 05/06 amps switch.

All as per serial item No 25.00 here in-before but with 4.00 Sqm nominal corss sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply & fixing switch piano, flush type, 05 / 06 Amps, single pole, one way, 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type, 240 volts complete all as specified & directed.

Supply & fixing switch piano, flush type, 15 / 16 Amps, single pole, one way, 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps,3 pin 15 / 16 Amps (2 in 1 multipurpose) flush type, 240 volts complete all as specified & directed.

Supply and fixing of decorative LED tube light fitting 1x20 Watt, with opal diffuser, environemental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material all as specified and directed. Make :- Havells Model No- Photon Ultra-1213T-8SSTL20WLED865SPC+LHFXCEPITNNW020 or Crompton Cat No -DMLN1LT8-16, LT8-20-865-2 or Wipro Cat No- PO8120d612065-1

Supply and fixing of ceiling rose 3 terminal PVC / poly carbonate, isolated body complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, triple pole and neutral, AC, 415 volts, 04 way with 200 Amps rated copper bus bar and IP-43 & IK 09 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing in MCB, SP, AC, 240 volts of 6 to 32 Amps capacity, 10KA "B" series, and making connections complete complete all as specified & directed.

Supply and fixing MCB, DP, AC, 240 volts 40 to 63 Amp capacity 'B' series, 10KA and making connections complete all as specified and directed.

Supply and fixing isolator 4 pole 'B' series 40 Amp capacity AC 415 volts, 10 KA complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply , laying and fixing 50mm bore galvanised steel tubes light grade with all fittings, laid in trenches for cable protection complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous fly ash brick edging with width equal to the length of the brick of whole bricks laid on edge for protection of cable complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground, earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 metre below ground level, steel earth plate connected with GI wire 4 mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test points all as described in MES schedule Part I including excavation, earth work ,concrete pit with 50mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar and GI protection pipe of 15mm dia and watering pipe 20 mm dia with water funnel with wire mesh, test point and extra length up to 7.5 mtr(beyond 7.5 mtr will be measured seperately). Connected to main switch board complete all as specified and directed. Note:- On testing after completion if desired earth resistance is not obtained,the earthing will be redone

Supply andfixing LED security light fitting 1x25 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass cover in frame with high power LED, white lamp type of capacity 25 watt complete all as specified and directed Make : Crompton Ordering Product CodeLSTS -25-CDL or equvelent make in C&S/Havells.

Supply and fix security light brackets made of 32 mm dia GI pipe medium grade , 0.6 mtr long, bend to required shape at 100-120 degree including 2 Nos of MS flat iron clamps of 40x5mm flat iron 300 mm long with suitable size of nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed .

m/s gupta construction

Rajneesh Jain