Restoration of rain damage of LWSS Kachoti Gallu Amb

Supply & Errection of horizontal spindle split casing/end suctions(back pull out arrangement) single/ double/ multistage centrifugal pump of Kirloskar/ Lubi/KSB make single stages with 25 HP 2900 RPM as pere BIS-1250-1980 with up to date ammendments, read with IS:9137-1978 or latest edition suitable for lifting clear water for under mentioned characterstics with impellers/ priming funnels, casing ring and shaft sleeves, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/cast steel base plate (base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage drip proof induction motor of 25 HP Kirloskar /Crompton/ NGEF/Jyoti make and suitable for operation on 400 (+/-)10 % volts, 50 cycles/secon, 3 Phase AC electricl supply. The power of electric motor should be at least 10 % exess of the maximum power required by the pump in the operation range of (+) 10 % and (-) 15 % of the duty point head. The motor should be as per IS:325-1978 with up to date ammendments. It include supply and erection coupling and base plate read with IS:900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirement:- (1) Discharge = 4.50 LPS (2) Total Head = 198 meter