SPECIAL REPAIR OF FURNITURE AGAINST BER AND PROVN OF 105 X DOUBLE BUNK BEDS AT 629 TPT ASC UNDER GE (WEST), DELHI CANTT-10

Almirah Medium steel , Drawing No- HFD-2056 DIMENSION:- (a) The overall size of almirah medium steel is (1270 X 765 X 440)mm with three shelves. (b) 1.25 mm thick MS Sheet Back (c) 1.25 mm thick MS Sheet shelves. (d) 1.6 mm thick MS Sheet channel base end covered. (e) The handle shall be made of steel. Finish : Powder Coated pre-treated. Rest all as per drawing

Almirah Large steel 1/2 Hanging 1/2 Shelving, Drawing No- FD/E6/MAP/18 DIMENSION:-The Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. DESCRIPTION:- a) It shall be made of 1mm thick MS sheet . All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves,one locker and one drawers with two partitions at upper half with hanging arrangement. c) The almirah shall have decorative chrome plated handle 150mm long fitted to three way locking system . d) The handle of inside drawer shall be made to "S" Shape by bending the MS sheet of front face of drawer to full length. e) The locker of almirah shall be provided with two way bolt locking system having duplicate flat keys and one brass lock shall also be provided at front shutter with stainless steel key plate of dia not less than 40mm. f) Rest all specifications and dimensions are as per drg Make of Hardware- Harrison/EBCO/Hettich/Link/Godrej FINISH:- he almirah shall be dry powder coated in double shade of colours off white after preparation of surface and application of metal primer. The sjades will be decided by engr-in-charge or as directed by GE.

Charpoy IP hard top, Drawing No- FD/MAP-II/01 DIMENSION: Overall size shall be 1980mm long, 900mm wide and 440mm high. DESCRIPTION: a) The frame of charpoy shall be made of MS hollow square pipe of 16 Gauge as per specified sizes mentioned in drg. b) Top of charpoy shall be of 12mm thick BWR plywood of grade -A; place and fix over the stiffners and cleat with 12 Nos of flat head bolt of 6 mm dia,50mm long nylon insert nut and round washer c) Each leg of charpoy shall be provided with 32mmx32mmx5 mm thick MS Plate shall be welded at bottom of each leg. Rest all specifications and dimensions are as per drg FINISH:-The charpoy shall be dry powder coated in black after preparation of surface .

Charpoy folding IP with Hard top, Dwaring No- FD-388(R) DIMENSION:The overall size shall be 1980mm long,900mm wide and 400mm upto ply top. DESCRIPTION: a) The frame of the charpoy shall be 25mm dia MS conduit pipe of 16 Guage. b) Top of charpoy shall be of 8mm thick BWR ply of grade -A; place and fix over the stiffeners with 16 Nos of flat head bolt of 6 mm dia,50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 25mm internal dia hard rubber shoe. Rest all specifications and dimensions are as per drg FINISH:-The charpoy shall be dry powder coated in black after preparation of surface .

Chair dining, Dwaring No- FD/E6/MAP/10 Dimenstion:- (a) Overall height should be 900mm. (b) (25 X 45)mm Teakwood Back. (c) 15 X 30)mm Teakwood VER Strips. (d) 75 mm thick, 32 density foam with fabric on seat of 12 mm thick ply. (e) (65 X 25)mm teakwood rail on all side. (f) (30 X 40)mm teakwood front and rear leg. (g) (20 X 25)mm teakwood stiffner.

Chair Easy with Cushioned, Dwaring No- FD-358 DIMENSION: The overall size shall be 510 mm wide x 545mm deep 740 mm high from back. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) The seat shall be made of 4mm thick plywood ,75mm thick PU foam cushion (32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight. c) The back shall be made of 4mm thick plywood ,50mm thick PU foam cushion(32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight. d) The wooden arms shall seprately provided with cushioned armrest made of 4mm thick plywood ,25mm thick PU foam cushion(32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight and shall be fixed from bottom with wooden screws. e) PVC hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. d) Rest all parts and dmensions are as per drg FINISH:-All wooden surfaces shall be polished in high gloss melamine finish after preparation of surface with sand emery paper and applying putty.

Chair Verandah ,Dwaring No- FD-359 DIMENSION:The overall size of the chair shall not be less than 460mm wide,600mm deep and 355mm high jupto seat from ground level and over all height 760 mm DESCRIPTION: a) The frame of the chair verandah shall be made up of 20mm dia conduit pipe of wall thickness 1.6mm. b) Seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0.6 mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. c) PVC hard rubber toes shall be provided to each leg of chair verandah. d) Rest all parts and dimensions are as per drg. FINISH:-The chair shall be dry powder coated in white after preparation of surface .

Chair Writing Officers ,Dwaring No- FD/E6/MAP/12 The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping all-round shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be duly epoxy powder coated in black colour with Grade C standards as per IS13871: 1993 alongwith preparation of surfaces . Rest all specifications are as per drg and directed by Engr-In-Charge. Make of cushion - Kurlon/Sleepwell/MM Foam. Rest all as specified/shown on drawing and as directed by Engineer incharge.

Chair Dining Officers ,Dwaring No- FD/MAP-II/04 Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply 75mm thick 40 density cushion of approved foam(Kurlon/sleepwell/MM Foam) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm. Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm. All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg. Make of BWR plywood - Century / Greenply / Duro.Rest all as specified/shown on drawing and as directed by Engineer incharge.

Bed Hard ,Dwaring No- FD/E6/MAP/08(R) DIMENSIONS : 2050mm (L) x 900mm (W), height will be as per drawing. (a) Main Frame :- (i) Main frame pipe shall be 25 x 65mm rectangular MS pipe (18 Gauge wall thickness). (ii) Middle support shall be 25mm x 25mm Square MS pipe (18 Gauge, 04 Nos equal distance) in line with bottom of 25x65 mm section. (b) Top :- Top shall be 12 mm thick BWR phenol bonded commercial ply with edging unpolished placed on top of 25 x 25 mm Supports. (c) Head board and foot board :- (i) Frame work for head board and foot board including Legs shall be of 38 mm x 38mm Square MS pipe (18 Gauge wall thickness). (ii) Bottom stiffener on legs for head board shall be of 25 mm x 25mm square MS pipe (18 Gauge wall thickness). (iii) Frame for holdng pre-laminated MDF board exterior grade (one side natural teak finish decorative and other side white) shall be of 18 mm x 18 mm square MS pipe (18 Gauge wall thickness). (d) Pre laminated MDF board exterior grade fixed with screw on 20 x45 mm MS strip are welded to CR frame. (e) Rest all as per drawing. (f) Finish:- All iron surfaces shall be duly epoxy powder coated in Dark Brown colour with Grade C standards as per IS13871: 1993 alongwith preparation of surfaces as directed by Engineer-in-charge . Make of Prelaminated MDF board exterior grade - Century / Action Tesa / Green. Make of BWR plywood - Century / Greenply / Duro. Rest all as specified/shown on drawing and as directed by Engineer incharge.