PETTY REPAIR TO BR WORKS IN TYPE I, TYPE II AND TYPE III QTRS OF DRDO AND DGQA POOL AT RAKSHA VIHAR COLONY UNDER GE I R AND D KANPUR

Amount

Petty repairs to leaking water in bib tap, pillar tap, stop cock, angle valve of any description by changing the washer etc complete all as specified and directed.

Removal of air lock / blockage of water in GI, tubing 15 mm / 20mm bore cleaning the pipe or fittings etc and re-fixing the same in position complete all as specified and directed.

S&F in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm- 125gms) all as specified and directed.

S&F in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair 15mm bore chromium plated Stop/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Repair to stop valve (concealed) type by replacing face or spindle of suitable size complete all as specified and directed.

S&F in repairs Knob CP for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head screwed both ends for 15 mm bore of pipe complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms).

S&F in repair CP health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long easy flex tube in chrome finish, complete all as per specified and directed.

S&F in repairs 32 mm dia PVC Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repairs 40 to 50 mm dia PVC Waste coupling of PTMT for sink (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair 32/40 mm dia PVC waste pipe for WHB/Sink of 90 cm long with union complete all as specified.

Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

S&F 20 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed.

S&F 15 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed.

Refixing 20 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) complete all as specified and directed.

Refixing15 mm bore GI pipe any grade fixed to wall and ceiling including making the screws, threads as required with necessary new fittings such as elbows, tees, sockets etc and making good cutting holes etc with cement mortar (1:3) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe and fixed (min wt 210 gram) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm dia iron pipe and fixed (min wt 142 gram) complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450mm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs oil putty for window glass up 2nd floor complete all as specified and as directed.

S&F in repairs stainless steel sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in brackets complete all as specified and directed.

S&F in repair CI bracket for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.

S&F in repair vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with 'P' or 'S' trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs vitreous chinaware wash down water closet pan Pedestal pattern white including fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repairs PVC syphon with handle complete for low level flushing cistern of any description size and pattern complete all as specified and directed.

S&F in repairs PVC handle for low level flushing cistern of any description size and pattern complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and aluminium hinging device complete all as specified and directed.

Petty repairs / adjustment to washer / syphon etc for high level or low level flushing cistern and making functional complete all as specified and directed.

S&F in repair CP grating 100 mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair towel rail 20mm dia, 60 cm long brass chromium plated with brackets complete all as specified and as directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 250 to 500 Ltrs capacity of tanks (icluding writing date of cleaning on tank with paint) complete all as specified and directed.

Dismantling water tanks 250 ltr and n.exc 500 ltr and removal from site complete all as specified and directed.

Demolition of reinfocement cement concrete cut as required to facilitate and paving not exc.15 cm thickness ( above roof upto 3rd floor roof) for old RCC Tank Capacity N. exc1500 Ltr and finished the surface with rendering in CM 1:3 and disposal of u/s material within 100m lead as per direction complete all as specified & directed.

S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size complete all as specified and directed.

S&F in repairs overhead tank cover of PVC for 500 ltr tank complete all as specified and directed.

Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 63mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) bends/Tee any radius for 63 mm bore of pipe complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each and refixing in the same opening.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each complete all as specified & directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

M&L mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F factory made mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

M&L Providing, cement concrete type B0, 1:3:6 (20 mm graded stone aggregate) as in coping, holdfast area, bed block, tank base etc complete all as specified and as directed.

S&F for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes,MS flats, framed guard bars & similar work etc complete conforming to Fe 290 Gde-E-165.

M&L for Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide Zinc Chromium primer complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement, including taking down old plaster complete all as specified & directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement by using scaffolding upto the 15m height surface finished even and smooth without using extra cement, upto height of 2nd floor roof slab in any position, including taking down old plastercomplete all as specified and directed.

M&L for rendering 10mm thick on fair faces of ceiling surfaces of roof ,chazza,beam etc in cement mortar (1:4) including finishing the surface even and smooth for and upto 2nd floor roof slab ceiling, including taking down old plaster complete all as specified & directed .

M&L Dubbing out average 10mm thick on irregular face of walls/ ceiling (when specifically ordered in writing) complete all s specified and as directed.

M&L for preparation of new palstered surface of ceiling and applying three coats of white wash on newly plastered surface of ceiling, including preparation complete all as specified and directed .

M&L applying two coats of oil bound distemper on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

M&L applying two coats of cement base paint on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

M&L for three coats of white wash on New plastered of wall surfaces including preparation of surfaces complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples upto height of 2nd floor complete as same type as existing all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples upto height of 2nd floor complete all as specified and directed.

Cuttings out old existing hinges any type frm existing steel window/ ventilators and supply & providing/welding new box type steel hinges to fix the old windows/ventilators and making good complete all as specified and as directed.

Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges/ changing of face/ side of door adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F door rubber beading 40-50 mm wide complete all as specified and direcetd.

S&F in repair 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repair butt hinges medium weight cold rolled mild steel 100mm long fixing with srews or weld to steel/PVC/wooden frame work complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm long fixing with srews or weld to steel/PVC/wooden frame work complete all as specified and directed.

S&F in repair 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150mm long Anodised Aluminium tower bolt all as specified

S&F in repair 150mm long Anodised Aluminium tower bolt all as specified

S&F in repair 125mm long extruded aluminium alloy handle complte all as specified.

S&F 125mm long extruded aluminium alloy handle complete all as specified and directed.

S&F in repir 125mm long Mild steel handle, oval type, stove enamelled black complte all as specified.

S&F in repair 20-25mm dia PVC Coated MS Curtain rod fancy type with brackets incl fancy type curtain knobs fixed with side of curtain rod complete all as specified and directed.

S&F in repair hasp & staple, aluminium 100mm size complete all as specified and directed.

M/S UNIQUE ENTERPRISES (BID ID -3171157)

U.R ASSOCIATES (BID ID -3170981)