Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST AND REASONABLE BIDDER | |
| 2 | L2₹22.3 L+₹2.4 L (11.9%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 3 | L3₹23.1 L+₹3.2 L (16.1%)Rejected-Finance H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 4 | L4₹23.2 L+₹3.3 L (16.7%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 5 | L5₹28.0 L+₹8.1 L (40.8%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST BIDDER |
Tender Value
₹28.1 L
EMD Value
₹56,200
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAL
GE AF NAL
AS DESCRIBED IN BILL OF QUANTITIES
2023_MES_599414_1
GE (AF) NAL/T-22/2023-24
Open Tender
Civil Works
Item Rate
243 days
GE AF NAL
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE AF NAL
₹56,200
Yes
17 Aug 2023
30 May 2023
26 Jun 2023
30 May 2023
24 Jun 2023
12 Jun 2023
30 May 2023 - 9 Jun 2023
Amount
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L non-skid, ceramic coloured tiles 300 x 300 (7 to 8mm thick Square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6 complete all as specified.
M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 350X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed.
M & L for machine cut Granite slab 15 mm thick fixed as in repairs for steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as specified and as directed.
S & F as in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed.
Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed.
Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as spd & directed.
Supply and fixing in repairs long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.
Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed.
Supply and fixing in repairs fancy type angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Supply & fixing PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.
Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed.
Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified & directed.
S&F as in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
S&F as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed.
S&F in repair tubular towel Rail 20 mm dia of brass chromium plated complete all as specified and directed.
S&F in repair soap dish vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed
S&F as in repairs PVC bath cabinet, size 450mm x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, complete all as specified and directed.
S&F in repairs stainless steel plate rack of size 78cmX91cmX25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed.
M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out Note.- Where ever reinforcement required will be measured and paid seperatly.
Providing & fixing hard drawn MS steel wiremesh 80mm x 25mm with 3mm dia wire with Heavy duty nails, Fixing the mesh on the ceiling before Shootcreting work.
Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified
Dismantling of bricks(laid flat or on edge) or brick tiles in roof, floors, channels kerbs,aprons etc (each layes) laid bedded and pointed in any mortar
M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longtitudinally, At the junction of roof and parapet wall a grove of 20 x 20 mm shall be made at the ht of 100 mm and membrane shall be inserted and sealed with bituminious mastic joints/overlap shall ve saled with hot bitumen 85/25. Two coat of water proofing bituminious aluminium paint on top of APP membrane shall be applied all as directed by Engineer -in- charge.
Supply only integral water proofing compound ISI marked complete all as specified and as directed.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and as directed.
Material and labour for 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth using extra cement with WPC @ 3% by weight of cement complete all as specified and as directed. Note :- WPC will be measuredpaid seperately.
M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigments in floors, and cut and polished including 15mm thick screed bed in CM 1:6 complete all as specified .
Material and labour for providing cement concrete PCC (1:2:4) type B1 (20mm qraded aggregate) as in roof padding complete all as specified and directed.
Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed.
Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube, suppling & fixing in opening complete all as specified & directed
M&L factory made solid panel pvc door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and as directed.
S&F window/ventilator section of frame 72x55mm fixed to wall or concrete surface with MS hold fast (30x5mm section) 150mm long made of galvanised steel powder coated and section of shutter 47x20mm mullion section 72x50mm (Bse steel as per IS 513*D* quality galvanised as per IS 277 with zinc of 120gms/sqm) glazed or gauged and wire gauge shutter prepare to recieve wire mesh to the shutter (double door shutter) with total coated thickness of 0.6mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacimg fixed in MS flat frame (30x5mm) fixed to windows frame with screws, incl 4 to 5mm thick steel glass, 0.36mm stainless steel wire cloth with 1.40mm aparture necessary fittings and all builders hardware such as handles , tower bolts & stays etc. complete all as directed. type- 4000series ref drg No.CEAF/STD-191/2014 SH 1/2 & 2/2 complete all as specified and as directed.
Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed.
Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed.
Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm fixed as in repairs complete all as specified & directed.
Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed.
Supply and fixing aluminium fabricated type extruded handles of size 100 mm fixed as in repairs complete all as specified & directed.
Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.
Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc complete all as specified.
Material & Labour for pressed steel frames for doors of size 105 x 60 mm for doors with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified.
Supply and fixing plain, framed, Plain framed, panelled shutter (two panel) 35 mm thick of 2nd class hardwood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed.
Supply and fixing glazed and gauged skeleton shutters 35mm thick, 2nd class hard wood 'Hollock' open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc incl priming coat. The size of member of shutters as spfd in SSR Part-1 Section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified & directed.
Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed.
Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.
Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm fixed as in repairs complete all as specified & directed.
Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed.
Supply and fixing aluminium fabricated type extruded handles of size 150 mm fixed as in repairs complete all as specified & directed.
Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.
Supply and fixing 200 mm long aluminium anodised sliding door bolt fixed as in repairs with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.
Supply and fixing Galvanised mild steel wire cloth, in new doors and windows 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.
Supply and fixing Galvanised mild steel wire cloth, as in repairs, 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.
Material & Labour for Plain Cement concrete type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.
Dismantling boarding any description fixed in any position with screws complete all as specified and as directed.
S/F 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work/ steel chowkhats as in kitchen cabinet / cubboard shutter complete all as spd and directed.
S/F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and as directed.
S/F 40mm width of flaps continuous (piano) hinges mild steel bright finish or electrogalvanised complete all as specified and as directed.
Material and Labour for preparation of new surfaces of wood & wood based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and Labour for preparation of new steel & steel based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) incl for angle iron,fencing post,Rolling shutter etc. complete all as specified & directed. Note: -Contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.
M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed. Note: Contractor shall procure 50% of Synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained..
Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares n.ex.c. 0.50sqm in each pane complete all as specified and directed.
Ditto but 4mm thick ordinary sheet glass exc 0.5sqm in each pane complete all as specified and directed.
Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any sitution / floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling 1st coat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm 1:3 finished even and smooth without using extra cement after applying cement slurry @ 3.00 Kg/Sqm and applying two coats of exterior emulsion paint complete all as specified and directed. Note : (i) Unit rate of this items includes the cost of scaffolding, form work, necessary water proffing agent etc and nothing extra shall be paid on account of variation if heights (ii) The measurement of finished plaster of 2nd coat provided on surface in sqm shall be the mode of measurement aganst this item
Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.
Material and labour rendering 15 mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage / plain pattern of approved tint / shade(s) over a coat of water based primer complete all as specified and directed.
S&F as in repairs door beading 40mm x 6mm with metallic body fixed to bottom rail of door with screws and washers of suitable size complete all as specified and directed.
S&F as in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified.
S&F as 110mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified.
S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
Material & Labour Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
S&F PBI Sheet 1mm thick shutter with box type steel frame for built in up steel cupboard,almirah etc incl applying two coats of synthetic enamel paint over a coat of red oxide primer on both surfaces and locking arrangement with 4 lever lock complete and including taking down chowkhats with shutter all as specified and directed by the Engr - in Charge.
S&F as in repairs of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate complete all as specified and directed.
Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed.
S&F 500 litres capacity Rotational moulded polyethylene water storage tanks trople layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed
Taking down and Easing of door shutter of any size for smooth opening/closing by tightening of butt hinges in position including changing of unserviceable existing butt hinges, adjustment of butt hinges in position, adjustment of existing iron mongery, welding etc. and re-fixing in same opening complete all as specified and directed.
Taking down and Adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.
M&L for brick work with old size sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar 1 : 6 complete all as specified and directed.
Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified & directed.
Material & Labour for 75mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub base concrete all as specified & directed.
M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays and surfaces finished even & smooth without using extra cement complete all as specified .
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed with grey pigment and no pigment jointed in neat cement slurry in floors complete all as specified and directed.
S&F Harrison rails in repair mild steel, anodised aluminium with fixing brackets, stops, rollers etc. complete all as specified and directed.
M&L for Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.®. complete all as specified & directed.
M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed.
M&L for post construction treatment ATT in voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed.
Dismantling stone and tiles of any description or thickness in floor aprons etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
M&L for Kota stone slab 20-25mm thick in riser and tread of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 including rounding of edges of stone rubbing and polishing complete complete all as specifdied & directed
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,M&l for buffing, polishing and making curvature (where ever required) and fitting the same with ecessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. cut to lengths (Fe-290 GDE E-165)complete all as specified & directed.
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. as specified & directed .
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified & directed.
S & F Exhaust fan 300 mm dia including louvers AC single phase 240 volts of size 300 mm sweep(metal body) and not less than 900 RPM including flexible wire 3 core 1.5 Sqmm from ventilator fan to ceiling rose all as specified and as directed.
M & L for point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC concealed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure haing zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019, complete all as specified & directed. Notes- [i] Wiring from the DB (distribution box) to terminal boxes for power plugs, fan regulators, switches, socket outlets, etc. shall be deemed inclusive in the quoted rates.
One fan/light point controlled by one switch, with cables 1.5 mm² size
One 6 A socket outlet,independent board with cables 1.5 mm² size
One 16 A socket outlet, independent, with cables 2.5 mm² size
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed.
Supply and fix Switch piano flush type single pole one way 5/6 amp complete all as specified and directed.
M/S BIKANER CHEMICAL LABORATORIES
SHREE GURU NANAK CONSTRUCTION COMPANY
m/s gaurav enterprises
vikas builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .