Improvement works along with other allied works to the AE Kottampatti section office building pertaining to East Division of Madurai EDC

Improvement works along with other allied works to the AE Kottampatti section office building pertaining to East Division of Madurai EDC.

Clearing light jungles including uprooting and removing the jungles away from the site including cost of all material, labour charges,tools, lead, lift,etc.,complete.

Pointing the pressed terrace tiles using CM 1:3 mix with water proofing compound including cost of all materials, labour, lead, lift etc., complete.

Dismantling the existing RCC window sunshades by manual or by using deploying machineries and removing of excess concrete wastages from yard premises as directed by the site engineer including cost of all materials, labour, lead, lift, etc., complete.

Supply, erection and fabrication of MS hollow square section pipes to support Galvalume colour sheet of size 0.47mm thick including cost of all materials, labour, lead, lift, etc., complete.

Supplying, fabricating and roofing with colour Galvalume colour sheet of size 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers including cost of all materials, labour charges, lead, lift, etc., complete (but excluding cost of MS hollow pipe supports).

Chipping of concrete and roughening the surface of damaged ceiling, damaged concrete from Lintel, roof level, Plinth level, flooring patchwork etc., and removing of excess concrete wastages from office premises as directed by the site engineer and redo the same with Plastering using CM 1:3 mix 20mm thick with water proofing compound and adhesive chemicals/compounds including cost of all materials, curing, labour, lead, lift, etc., complete.

Clean removal of cement plaster from walls and racking out joints 20 mm deep and removing of cement plaster wastages from office premises as directed by the site engineer including cost of all labours, materials, lead, lift, etc., complete.

Plastering with CM 1:5 mix using 12mm thick for inner walls including cost of all materials, labour, lead, lift, etc., complete.

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat of plastic emulsion primer for outer wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Engineer before use on works.) for outer wall including cost of all materials, labour, lead, lift, etc., complete.

White washing two coats with white cement of approved quality over a primary coat for inner walls including cost of all materials, labour, lead, lift, etc., complete.

Supplying, laying and jointing of 25mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (including cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof.

Supplying and fixing in position first quality and approved 25mm Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).

Supplying of PVC Screw Down Tap Heavy Type 20mm dia in water supply arrangement including cost of all materials, lead, lifts, labour etc., complete.

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 36)

Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 39)

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 16)

Supplying and Fixing of PVC panelled door shutter including cost of all materials, labour, lead, lift, etc,complete.

Providing and fixing in position Plain glass 4mm thick for replacement of damaged window glasses including labour charges for fixing, cost of materials, lead, lift etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu