IMPROVEMENT OF FRONT FACADE OF HQ DAKSHIN BHARATH AREA WITH ACP PANELS UNDER GE CHENNAI

Amount

Taking down cement plaster on brick work , concrete or stone walls etc including racking out of joint , hacking for key scrubbing down with water upto a height of 12.00mtr from ground level including necessary scafolding etc., complete all as specified and directed.

S&F of 3mm thick Aluminimum Composite panel (ACP) of any colour, shade and texture, Exterior Grade I, having Aluminimum Cover Sheets (Skin) thickness of 0.5mm, LDPE thermoplastic core, panel width of 1220mm and length 2440mm or any width &length arranged at site as directed, Exterior face coil coated with PVDF, interior face coil coated with polyester, Fire resistance Class "A", anti static and including Aluinimum anodised frame work horizontal and vertical direction at an interval of 1.20 mtr and additional support at projection of columns, chajjas, facias including additional support at rain water/AC pipe to adjust the level of the pipe with the section of anodised aluminimum pipe 50mmx30mm of 1.5to2.00mm thickness and fixing arrangements with L -Angle section with necessary hot dip galavanised bracket and fisher or hilty anchor fastener work in wall, ceiling, column, window cill and providing necessary opening etc., including filling of joints using seleant to match the colour of sheet as recommended by manufactures complete all as specified and directed.

Note : The quoted rate for Item No 2 inclusive of following:- (a) The pattern and colour of ACP shall be all as approved by Engineer- in- charge. (b) 3D design shall be submitted before commencement of work for approval. (c) Provision of necessary steel scaffolding arrangement for a minimum height of 12.00m as per site requirement as the existing building is G+2 storeyed and adequate safety measures shall be followed. (d) The number and location of openings in ACP for maintance of RWP shall be as directed by Engineer-in-Charge.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces in patches finished the surfaces even and smooth without using extra cement upto height of 12.00mtr including necessary scafolding all as specified and as directed.

Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists,junction of wall & columns etc. in walls, Ceilings, stanchions, beams, etc. including all laps, cutting & waste all as specified and as directed.

Supply and fix PVC (SWR)branch piece, double Y equal or unequal 110mm bore with access door as in repairs all as specified and as directed.

M & L for Chipping, Chiselling surface mechanically with chipping machine :- (1) Providing zinc rich primer for treating exposed reinforcement (2) Providing 100x100x3mm weld mesh and fixing the same with shear connectors of 8 mm dia with epoxy resin. (3) guniting the area with CM 1:3 of over all thickness 50mm in with two layers in small areas/patches nexc 1.5Sqm complete all as specified and as directed.

Complete all as specified in item No.06 above but guniting the ceiling area with minimum pressure of 5kg/cm2 to an average thickness of 25mm in CM 1:2 and finish the surface fair and even all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in two layers, first layer 10mm thick in CM 1:6 and second finishing coat 5mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces upto height of bldg 12.00mtr including necessary scafolding complete all as specified and directed.. Note:- Supply only water proofing compound will be measured and paid seperately.

Supply only liquid water proofing compound

M & L for carrying out crack repair work in walls as follows:- Cleaning the surface around crack and joint free from loose particles and dust, cutting 'V' shaped groove of size in range of 6 to 25mm of width and depth along the crack line by machine or manually, then clean the groove by wire brush to remove loose particles and then washed by water jet, and fixing nozzle and repairing cracks using Fosroc Rendroc CS chemical or its techno commercial equivalent chemical manufactured by CICO/STP/MC BAUCHMIE/DR FIXIT/BASF with a proportion of 1 part of water to 2.5-3.0 part of above chemical by volume or w/p ratio 0.36 by weight complete all as specified and as directed.

M & L for carrying out crack repair work in RCC areas as follows:- Chipping the loose particles upto 300mm distance on both side of crack and depth 25mm behind the reinforcement bar and corrosion treatment to existing reinforcement bars and then applying bonding agent of make nitobond SBR or its techno commercial equivalent bonding agent manufactured by CICO/STP/MC BAUCHMIE/DR FIXIT/BASF to the surface and providing requisite shuttering before concreting and concreting using ready made concrete material MICRO CONCRETE using Rendroc RG spl or its techno commercial equivalent concreting material manufactured by CICO/STP/MC BAUCHMIE/DR FIXIT/BASF complete all as specified and as directed. Note:- Additional reinforcement with 8mm TMT bars to strengthen existing reinforcement @ 2KG per RM approximately of crack length has to be provided as directed by Engineer in charge and the rate quoted is deemed to include for the same .

Removal of SS Letters on concrete surfaces of any description and height of letter exc 60cm but not exc 90 cm at a height of 10.50 to 11.50 mtrs from ground level and refixing the same on ACP panelling complete all as specified and directed

S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

S&F (SWR) Bends of any radius of 110 mm bore of pipe complete all as specified and directed.

Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger.

Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete including preparation of old plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger.

TMT bar 6mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with the icluding MS wire (annealed) than 0.9mm dia complete all as specified and directed.

Dismantling and refixing of existing out door unit of air conditioner of any capacity at desired location complete all as per direction of engineer-in-charge Notes: (i) Supply only copper pipes, drain pipes and M&L for sub main wiring will be measured and paid under relevant items. (ii) The existing outdoor units are situated in various floor levels from Ground floor to second floor levels and rate quoted is deemed include for the same. (iii) The rate is deemed to include for topping of gas to compressor, mounting brackets, bolts, nuts etc as required and nothing extra is admissible. (iv) Existing unserviceable items like copper/aluminium pipes, drain pipes, brackets, wiring material etc retrieved during shifting of out door unit shall be handed over E/M stores, GE chennai and rate quoted is deemed to include for the same.

Supply only copper pipe 1/2" dia for air conditioner of any capacity including insulation of suitable size .

Supply only copper pipe 5/8" dia for air conditioner of any capacity including insulation of suitable size .

Supply only copper pipe 1/4" dia for air conditioner of any capacity including insulation of suitable size .

Supply only PVC conduit pipe (Flexible/Rigid) of size 20mm dia including all accessories as drain out pipe complete all as specified and as directed.

S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe surface on wall alongwith accessories fixed on walls/floors/ceiling with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 4 sqmm + one run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with two runs of 1.5 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe surface on wall alongwith accessories fixed on walls/floors/ceiling with one run of 1.5 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 1.5 sqmm + one run 1.5 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 230 volt 4 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as directed by Engineer in charge.

S&F MCB of SPN of rating 32 Amps 240 Volts complete all as specified and directed by Engr-in Charge

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed by Engr-in Charge

S & F 15 Watts LED Wall light is a functional range of aesthetically designed up-down luminaire downlights with aluminum housing and heat sink for better thermal performances, complete all as specified and as directed by the Engr-in-Charge Make Havells Cat No. CLIOWLS25WLE830PSYMTOTG or its equivalent in Philips/Bajaj/Eveready/Crompton.

S & F 15 Watts spot Light is a functional range of aesthetically designed surface mounted downlights with aluminum housing and heat sink for better thermal performances, complete all as specified and as directed by the Engr-in-Charge Make Havells Cat No. UNECOSURFLS15WLE857S24BLK or its equivalent in Philips/Bajaj/Eveready/Crompton.

YOGAA MANPOWER AGENCY (BID ID -3296447)

SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3299253)

Sri Aruna Associates (BID ID -3298166)

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3294511)

SRI VISHAKHA ENTERPRISES (BID ID -3298632)