CHROMEPET CSC

Amount

Making opening ot required size in partition by Dismantling double skin ANG partitions by taking out the particle board on both sides and cutting the Aluminum vertical and horizontal frames and refixing the frames and particle board at the required positions after fixing the available Aluminium grill frames of require size including necessary additional frames,clamps, clips, screws all complete as directed by the Engineer-in-charge.

Area:1.20mx0.85

Taking out existing false ceiling tiles to remove off stains and dirt etc. using approved liquids and levelling the grid works to its true alignment and replacing the tile boards using necessary screws all complete as directed by the E-in-C

Deep cleaning of tile flooring to remove off dirt, dust,stains etc by manually or required machines using necessary floor cleaning liquid and with required safety measures to protect exsiting ANG partitions , modular work stations all complete as directed by the Engineer-in-charge.

Carpet area

Repairing Modular work stations and counters by applying putty, pasting with required tape and cleaning the stains and pencil marks etc. using approved stain remover ,APPLYING Touchwood polish one coat and peel out the unnecessary wall posters ,hangers etc. to enhance the outlook of CSC inner and outer wall all complete as directed by the Engineer-in-Charge.

Dismantling jack arch roofing sheet (PVC sheet & polycarbonate sheet) including rafters, purlins and supports ( wherever required) and stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Taking out Rolling Shutter including stacking the serviceable materials 50 metres lead

Repairs to rolling shutters of size upto 3.47x3.30m by servicing the M.S. laths and interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete and providing 27.5 cm long wire springs of approved make 3 nos, wheel and bearing set -3 nos , cover-1no and applying grease and making the rolling shutter in working condition and refixing the same in existing location all complete as directed by the Engineer-in-Charge..

Cutting the corroded MS post member of 90mm dia and providing and welding with new member of MS angle section of required size and concreting (with CC 1:1.5:3 mix) the area surrounding the pipe 200mm dia and to a height of 60cm after drilling and inserting the TMT rod of 8mm dia and length 65cm to prevent corrosion all complete as directed by the Engineer-in-charge.

Repairing of glass door by replacing the non functioning floor spring and door lock with new by taking out the damaged one and fixing the new units of approved make (Dorma,ozone or equivalent) to the existing glass door all complete as directed by the engineer-in-charge.

Ozone OCFH-70E Set STD SSS - The Original SELF Closing Patch Fitting Glass Door Set or equivalent

Glass to Glass Door Lock - No Drilling | Stainless Steel Durable Lock for 10mm - 12mm Double Glass Doors | Anti Theft System - Double Door Central Lock | with 3 Keys of Taj Products make or equivalent

Providing and fixing polyster Vertical blinds of approved make and colour for windows with necessay railings, hooks, open and shut arrangements etc all complete as directed by the E-in-C.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws with EPDM gaskets complete :

Gutter (600 mm over all girth)

Extra for making curve shape in precoated G.S. sheet roofing :

0.50 mm thick

Providing and fixing Polycarbonate sheet roofing size, shape, colour,pitch of roofing as approved by E-in-C inclusive necessary screws all complete.

Providing ridges or hips of width 60 cm overall with plain colour coated G.S. sheet fixed with self tapping screws of required legth and EPDM gaskets etc complete as directed by the Engineer in Charge.

0.50 mm thick sheet

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Applying priming coat :

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m.

All kinds of soil.

Credit to the unserviceable, corroded MS hollow tubular sections all complete.