IRQP work of Hazaribag St. Columbas College More Churchu Hatyari More NH 33 Road Length 30.038Km Under RCD Road Division, Hazaribag for the Year 2021-22

Amount

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) all complete job as per MORT & H specification and direction of E/I In Area of Light Jungle

Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) all complete job as per MORT & H specification and direction of E/I Rolling with Vibrating roller.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom all complete job as per MORT & H specification and direction of E/I

Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction)with VG-30 Bulk bitumen all complete job as per MORT & H specification and direction of E/I Clause No. 507 complete in all respects (Bulk Bitumen) for grading (19mm nominal size)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 to 5.4 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects) with Bulk VG30 Bitumen. (ii) for Grading-II(10 mm nominal size)

Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) speed Limit, sevron arrow mark etc. all complete job as per MORT & H specification and direction of E/I

Painting two coat on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces all complete job as per MORT & H specification and direction of E/I.

Providing and laying of Hot Applied Thermoplastic Compound 2.5mm thick including reflectorising glass beads @ 250gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 .The finished surface to be level, uniform and free from streaks and holes.) all complete job as per MORT & H specification Cl. No. 803 & as per direction of E/I (a ) Edge Marking (b) Zebra Crossing

Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) all complete job as per MORT & H specification

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.) all complete job as per MORT & H specification and direction of E/I

Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) Near Gaurya Krma Bazar, all complete job as per MORT & H specification and direction of E/I

Excavation in Soil using Hydraulic Excavator CK 90 nd Tippers with disposal upto 1000 metres. (Excavartion for roadwork in soil with hydraulic excavator of 0.9cm bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) Entry & Junction point KM 0.0, 1000m B/S : KM19-300 mB/S, KM30-300m B/S. all complete job as per specification and direction of E/I

Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) all complete job as per specification and direction of E/I For Grading-I Material

Providing and laying factory made chamfered edge Cement Concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using U mould laid in required colour & pattern over 50mm thick compacte bed of course sand, compacting and proper embedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver lbocks as per required size and pattern, finishing and sweepng extra sand, all complete as per manufacturer's specifications & direction of Engineering incharge. 16.91.2 80mm thick cement concrete paver blck of M 40 grade with aproved colour design & pattern.

Plain/Reinforced cement concrete in sub0-stracture complete as per drawing and technical specifications (M-20) all complete as per manufacturer's specifications & direction of Engineering incharge. Side of Paver block

GST 12% will be added on Total amount quoted by Contractor

Labour Cess 1% will be added on amount quoted by contractor including 12% GST.

M/S PUJA ENTERPRISES