Construction of New Archakars quarters and Staff Quarters (6 Quarters) for Arulmigu ThimmarayaSwamy Thirukoil at Kattinayanapalli (Boganapalli)

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and including refilling the sides of foundations clearing and levelling the site, etc., complete complying with standard specification. SS20 B. (TNBP. Specification.No : 23)

Supplying and the FILLING GRAVEL in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification and as directed by the departmental officers . (TNBP. Specification.No : 6,23,24)

Supplying and filling in foundation, basement, etc with crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 23,24)

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers (TNBP. Specification.No : 28 )

Supplying and erecting shuttering for sides and soffits including necessary supports for plane surfaces in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding with minimum support including all struts etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) (TNBP. Specification.No : 72&76 )

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by departmental officeres. (Payment for centering shall be given after the concrete is laid) (TNBP. Specification.No : 72&76 )

a)For plane surfaces such as RCC floor slab, roof slab, beams, lintels,etc.,

b)For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). (TNBP. Specification.No : 30)

For Foundation and Basement

For Super structure in GF

For Super structure in FF

For Super structure in SF

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire).(TNBP. Specification.No : 86 & 86-A)

Brick work in Cement Mortar 1:5 (One of Cement and five of sand)using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction and directed by the departmental officers.

a)For foundation and basement

Brick work in Cement Mortar 1:6 (One of Cement and six of sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including neat finishing curing, etc., complete complying with standard specifiction and directed by the departmental officers. (TNBP. Specification.No : 31c )

For Super structure in GF

For Super structure in FF

For Super structure in SF

Brick work in Cement Mortar 1:3 (One of Cement and three of sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including neat finishing curing, etc., complete complying with standard specifiction and as directed by the departmental officers . (TNBP. Specification.No : 31c )

For foundation and basement

Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including neat finishing curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) (TNBP. Specification.No : 31c )

For Ground Floor

For First Floor

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including neat finishing curing etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 56 &57 )

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and including neat finishing , curing, etc., in all floors complying with standard specification and as directed by the departmental officers (TNBP. Specification.No : 56 &57 )

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including neat finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 56 &57 )

Supply and fixing mild steel grills for windows, ventilator, gate, ladder etc including priming coat. (TNBP. Specification.No : 86&86a )

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. (TNBP. Specification.No : 81)

Fabricating supplying and fixing in position of steel glazed window (two leaves) with the following specifications outer frames of windows made of Z section F7D of size 33x25x3 mm at 1.419kg/m and mullion J section (F4B) of size 46x25x3mm at 2.2Kg/m and shutter section of made of F7D odf 33x25x3mm 1.419kg/m as specified in IS7452/1990 Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintance the panel of the shutters to be covered with 3mm thick pin headed glass and fixed with 15x12mm teakwood beating of superior quality and fixed with shutter frames 2 numbers of sturdy hinges and one number of handle to be fixed to each shutter at an appropriate height in window suitable opening is left for its easy operation a stopper square rod for handle is provided in the million section at suitable place to catch the window handle each window shutter having an adustable stay made out 18x5mm at 0.70kg /m MS flat pf length 320mm with three adjustable position a matching peg is provided in the outer frame of the window at suitable places 4 nos ogf hold fasts of 120mm length spliced at the ends are welded to the outer frame of the windowan MS square bar 12mm size is weled to the inner face of the window at an equal interval not exceeding 100mm edge between them all members are painted with one coat of anti corrosive red oxide primer as directed by the departmental officers all sections should be in confirmed with IS 7452/1900 The cost includes cost of all materials labour charges and other uncidental charges etc complete (TNBP. Specification.No : 81 )

Fabricating supplying and fixing in position of N type Ventilators using MS angle of size 25x25x5 mm for frame MS flat plat of size 20x3mm for fixing the weld mesh and using 25x22x3mm T section for the frame glass special type of hold fast weled to the frame 45 degeree inclined towardes centre for wall and fixing the weld mesh 25mm square including cost of 3mm thick pin headed glass panes for panels and fixing the glass panels with necessary clips & putties with required bolts nuts and washers and one coat of red oxided primer etc including necessary dismantling making holes in RCC columns beams masonry wherever necessary with power drill t the extend required and made good to the original conditions after finishing as directed by departmental officers.(TNBP. Specification.No: 81 )

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc complete complying with standard specifications as directed by the departmental officers

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, . etc., complete complying with standard specification and as directed by the departmental officers (The brand Quality shade & colour should be got approved by the Executive Enginner before use on work) (TNBP. Specification.No : 66 & 66a )

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat priming coat with approved primerin all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) (TNBP. Specification.No : 66 & 66a )

Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers (TNBP. Specification.No : 28 )

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110mm dia PVC Pipe

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications and as directed by the departmental officers

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

a)For laying PVC pipes 20mm

b)For laying PVC pipes 25mm

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

25mm pvc coupling

25mm pvc elbow

20mm pvc coupling

20mm pvc elbow

25x20 mm pvc reducer

25x20 mm pvc reducer tee

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC soil / waste pipe

110mm dia PVC soil / waste pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm pvc bend

110mm pvc elbow

110mm pvc door elbow

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....etc Complete complying with standared specification and as directed by the departmental officers

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications and as directed by the departmental officers. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification and as directed by the departmental officers. (The mirror should be got approved by the Executive Engineer before use on woks)

Paving the floor with fine polished cuddapah stone slab of following thickness over Cement Mortar 1:3 (One Cement and Three crushed stone Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five crushed stone sandand Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., complete complying with standard specification and as directed by the departmental officers (The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., )

Supplying and fixing in position best quality cuddapah sink of 600x450x200mm size including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thick slab in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using 20 mm and down grades HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 28 )

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. (and as directed by the departmental officers The PVC pipes shall be got approved by Executive Engineer before use on works.)

25mm dia pipe

32mm dia pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25mm dia pipe

50 mm gate valve

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).

150 mm dia

Supplying suitable PVC FINOLEX (OR) EQUIVALANT borewell (6kg/cm2) best approved quality with ISI mark with necessary PVC coupling eyc.,(The PVC pipe should be got approved by departmental officer before execution)

Supplying and fixing of suitable PVC endcap (6kg/cm2) for 6" dia.borewel of best quality with ISI mark with and complete complying with standard specificationd and departmental officers before execution)

Supplying of best and approved quality of HDPE pipe of the following size including laying in the borewell and tying with copper wire etc., complete complying with standard specification and as directed by the departmental pfficers

40mm dia HDPE pipe

Supplying and fixing of 1/2" dia Nylon rope for submersible motor of approved quality etc.,complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing of 3.00 HP 40 Stage 2020 kw and stainiess body( 6"dia Borewell )ISI Mark Submersible Motor etc,complete including all labour chargesetc complete complying with standared specifications and as directed by the departmental officers

Supplying and fixing wall mounting of Panel board with following accessories a.Suitable DOL type push botton automatic starter for 3HP Bore well etc complete complying with standared specifications and as directed by the departmental officers

Supplying and Fixing PVC insulated and sheated 4 core flat type copper cable conforming to IS 694/1990 etc complete complying with standared specifications and as directed by the departmental officers

Supply and Delivery and Fixing of HDPE tankk as per IS 12701/1996 including Loading, transportation and labour charges for of the fixing of the GI pipes and specials for pipe connection works including cutting,threading and fixing charges etc complete complying with standared specifications and as directed by the departmental officers

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Copper. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (6 Points Per Coil) higher end

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined modular type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall with painting

Supply and fixing of 4'20" W LED Tube light fitting with batten (make: higher end ) with TW round blocks on wall or ceiling with LED tube with PVC unsheated copper leads from terminals to the fitting

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathe copper leads from terminals to the fitting.

Supply and fixing of 9W LED Bulb for BH point.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (Class B) with 1 no.32 mm GI bend complete on the existing post/on wall with PVC unshethed copper leads with MS clamps and with painting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamps

Supply and fixing of 300mm (12") sweep (light dutyP AC exhaust fan complete with necessary wall opening and making good fo the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth conncetion only. Higher End.

Fabrication, Errection, Testing and commissioning of pedestal mounted pillar box made out of 16SWG CRCA MS Sheet of size 48" x36"x18" out door Type with double compartment and with angle iron stiffener with front open doors for eath compartment with lock and key facilities with sealing (TNEB Type) arrangement with dust and Vermin proof and space for fixing TNEB Electronic type energy meter suitable for 3 Phase 415 V 4 wire 50 HZ AC supply having 200 A Capacity Copper Bus bar on suitable bus insulators and provision for mounting 3 Nos C.T.S of 400/5A for incoming to the energy meter and supply and fixing of 1 Nos and 1 phase 230 v 2 wire 50 HZ AC supply. 200A fuse Units and neutral link on 6mm Thick Hylum sheet and provision for cable entry for both incoming and outgoing cables at the bottom and painting the board with Two coats of comprising the following. 1. Digital Volmeter and Ammeter with suitable Rotary 2. LED Indicator light arrangement with suitable push switch and fuse units 3. 1 No earth bus of 0.75 mts of 1" x 1/8" Copper flat at one side at both compartments 6. Caution / Danger board 7. For meter wiring should made with identification ferules 8. The whole arrangements should be errected on suitable mansory pedestal (MR)

Supply and run of 2 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in regid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm making good of the concealed portion with suitable colour. (SD-55)

Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC regid pipe concealed in wall and ceiling with continuous earth wire connection of 5.5 sq.mm wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continious earth wire connection of 4 sq.mm wire and making good of the concealed portion with suitable colour. (SD-57)

Supply and laying of 3-1/2 x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clarnping of 3-1/2x50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2x50 sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end tremination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Earthing as per the ISI specification with an earth electrodeof 2.10 metre class 'B' GI pipe of pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm 6mm with necessary funneling arrangements with neessary mansory work and with 38mm RCC cover slab for the brick mansory.

SUB TOTAL

S.R.CONSTRUCTION (BID ID -1367195)