Erection of additional Power transformer at Bairnaickanpatti 33 KVSS

Amount

Drawal of 1 No 5 MVA,33/11KV,3 Phase 50C/S,Dyn11 Power Transformer with OLTC Gear including Oil for First Filling RTCC Panel with Transformer Accessories etc ,Including loading ,unloading Transporting ,erection, hot Oil circulation and Commissioning etc,.

MS FLAT 65 X 10 (Earthmat only)

MS FLAT 50 X 8 (Including L.section)

MS ROD 40 mm (Including Earth rod)

MS/RTS ROD 20 mm (Including I-bolt)

Transporting of Iron & Steel items from various steel 2 yard Centeral Store (to Bairanaickanpatty SS) .,including loading and unloading charges.

4 Bolt Tension fitting for Zebra

"T" Clampfor Zebra to Zebra

"T" Clamp for Zebra to 2" B/B

Switch end clamp for Zebra

Switch end clamp for Mink

Switch end clamp for 2" Bus Bar

PG Clamp for Zebra

Free end Clamp for 2" Bus Bar

Corona Bell for 2" Bus Bar

1 Reducer clamp for 2" busbar

Labour, Machineries, consumables for Fabrication of Heavy6 section without Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Light section (Sectional weight below 14 Kg/Mtr)

Labour for Erection of Structure Heavy section (Sectional weight 14 Kg/Mtr and above)

Labour for Erection of Structure Light section (Sectional weight below 14 Kg/Mtr)

Labour for rust removing, cleaning painting of first primer 11 coat (Red oxide) of all sections including cost of paint, brush & consumables

Labour for rust removing, cleaning painting (Aluminium) of 12 first finishing coat of all sections including cost of paint, brush & consumables

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush & consumables

Labour for Erection of 33/22 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and 14 other consumables including support poles cutting, jointing, providing holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit) including providing holes wherever required as directed by the field engineer.

Labour for erection of CT/PT junction box including fabrication of clamp.

Labour for erection of 33 & 11KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of 33 & 11KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.(LC WORK INVOLVED)

Labour for erection of LAS Station type single pole stack 33 KV/11KV including fabrication of base if required

Labour for erection of Insulators single pole stack 22/11 KV

Labour for erection of strung bus of 11/33KV Single Zebra Conductor (1 span = 3 runs) Including hoisting of insulator (LC WORK INVOLVED)

Labour for erection of Busbar Including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer. Using 50mm bus bar of ength (with making bends)

Labour for erection of Busbar Including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer. (Without making bend)

Using 50mm bus bar of length (without making bends) Labour for erection of droppers and jumpers Including fabrication and any modification of end clamps wherever cessary and as directed by the field engineer.

Labour for erection of droppers and jumpers Includingfabrication and any modification of end clamps wherever necessary and as directed by the field engineer (LC WORK INVOLVED).

Labour for Erection of Simplex Panel including alignment and earthing as directed by field engineer.

Labour for erection of cable in duct/trench including cost of Alu.tag for identification Upto 8 core

Labour for erection of cable and clamping in structures including fabrication of clamps and fixing at uniform intervals as directed by field EngineerUpto 8 core

Labour for loading of unloading nonfragile materials without using board crane (one operation)

Labour for loading or unloading of fragile materials without using board crane (one operation)

Labour machineries, consumables for fabrication of earth 32 electrode 10mtr / 6 mtr length or as directed by the field Engineer

Labour machineries, consumables for fabrication & erection of earth spikes

Labour machineries and consumables for erection of 34 earthmat & earth raisers as directed by the field Engineer at site

Providing 150mm dia bore to a depth of 9 mtrs for earth electrode and labour for fabrication and erection of earth electrode in to the bore and filling with red soil, A4 grade bentonite powder, coal powder with 5% common salt mixed with available site clay soil with water 5 Kg/meter depth in earth bore and pouring water and tightening of earth bore upto satisfactory earth and supply of dentification board of size 300x150mm of 14swg and lettering and 12mm M.S. Rod to be fixed to the board.

Labour for excavation and refilling of soll for earth mat

Labour charges for painting of earth raisers by green enamel paint and where ever required Including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by th field Engineer.

Supply and provision of 600 mm mean dia 300 mm height, 36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by the field engineer

Labour charges for fabrication of bolt of required length out 39 of 18 to 20 mm dia G I rod including the cost of GI rod and 2 Nos. GI Nuts & washer as directed by field Engineer

Supply and provision of M5,M10,M12 & M16 (full thread) G.I. Bolt, Nuts & GI washer of various size for erection of AB Switch and Insulators or any other purpose wherever necessary and as required and as directed by field Engineer

Fabrication, supply and fitting of CT / PT Junction box of size 400 W X 150 D X 300 H made out of 14 SWG (2mm) M.S. Sheet with 16 Nos. termination of stand type with two nuts and washers suitable for 4 Sqmm copper cable and 5 Nos. 1" gland wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials

Supply and erection of B-class GI pipe for extension of tandom / down pipe for AB switches and for any other work as required by as directed by field Engineer including cost of GI Pipe of 40 mm dia

Supply and fixing of mounting channel suitable for CBTM 5 terminal block in Panel / Box as required and directed by the field Engineer.

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of Insulation of cable and providing suitable holes as required and as directed by the field engineer for sq 19 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of Insulation of cable and providing suitable holes as required and as directed by the field engineer for sq 25/25mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of Insulation of cable and providing suitable holes as required and as directed by the field engineer for sqm 28mm

Labour for provision of cable end gland

Supply and termination of cable core ends including the cost of cable socket (lug) ferrules, Aluminium tag straps etc., as per cable schedule and as directed by the field engineer

Supply and fixing of Godrej 6 lever navtol lock with triplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and fabrication of sand drum made out of oil drum of size 580 mm dia x 420 mm height with conical cover made of tin sheet provided with handle incluidng cost of barrel, sand, tin sheet & other materials

Supply and provision of 12 / 25 X 3 mm flexible braided copper tape / rope for interlinking panel earthing and for 54 any other purpose on any sizes including the cost of suitable copper lugs for criping of at both ends etc.as directed by field Engineer.

Fabrication,supply and Fixing of equipment board of verious size &fire stand etc as per drawing

Supply & provision of 2.5 Sq.mm multi stand?single core flexble Finolex / Indo cable for panel wiring work / for any other purpose as directed by the field Engineer.

Labour charges for writing details in finished surfaces boards including cost of enamul paint

Supply and fixing of wood board 25mm /Hylam short of 10mm thickness

Labour charges for drawing layout and writing details in LC/KEY board including cost of enamul paint

G.S.T. (Percentage should be Entered by the Bidder)

Bidder Name

RMITHA POWER AND INFRA (OPC) PRIVATE LIMITED