REPAIR TO JOINERY FALSE CEILING FLOORING TOILETS PLINTH PROTECTION PLUMBING CLEANING OF SERVICE WATER TANKS AND CERTAIN MISC WORKS AT HANSA VIHAR RAQAS NASDO AIRCATS INAS 552 AND NTS GOA UNDER AGE BR I OF GE NW VASCO

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC Rain Water Pipe 150 mm dia including all fittings, head, shoes, branches all as specified fixed in wall including joint with PVC adhesive complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore 110 mm bore PVC (SWR) Bends complete.

Dismantling mild steel work of any description not otherwise provided for complete.

S & F Mild steel roof trusses (framed), Trussed, purlins, crane gantries, rails and framings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe 410-W including cleats, distance pieces etc complete all as specified and directed.

Dismantling Wall and ceiling boards/ wall lining (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets /paneling, any thickness, including cover fillets complete.

S&F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet including of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Taking down ceiling board/tiles from aluminium snap grid frame work and refixing the same in the same position after necessary tightening the sagging portion, replacement of the Main Tees, cross Tees, angles, suspending if required, including bolts, necessary washer, nut / clits / pin hook etc for securing frame work to ceiling to the snap grid all as directed.

M & L for 12mm thick Perforated particle board / tiles for insulation and accoustic purposes, 60 x 60cm in size, fixed with nails to timber frame work or with staples on snap grid fixed in repair complete all as specified and directed. (Note: Aluminium grid shall be measured and paid separately under relevant item of this Schedule.)

S & F for Anodised aluminium snap grid of size 600mm x 600mm frame work for false ceiling complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete.

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking off shutters from the frame ) complete all as specified and directed.

Taking down shutters of any description n. exc. 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M & L for Solid (125mm x 65 mm Double Rebate) Factory made 100% solid WPC Door frame made from 100% LEAD FREE (Single extruded process) material with density 780kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge. The door frame should be water proof, Termite proof, Fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.

M & L for Solid (100 mm x 65 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in- Charge. The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.

M & L for 30 MM thick moulded plain WPC solid door shutter: Providing (30mm thick) MOLDED WPC Brown factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/ Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity. complete all as specified and directed

Providing and fixing 32mm thick brand factory made wire mesh solid WPC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles and 20mm x 40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer. 20mm x 40mm M.S. square tubes shall be covered with 6mm thick heat moulded WPC prelaminated 'C' channel of size 30mm thickness, 140mm width out of which 125 mm shall be flat and 15mm shall be bent in 90° angle on either side forming stiles & 6mm thick 165mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90° on the inner side to from top and bottom rail and 180mm wide wpc sheet out of which 150mm shall be flat and 15mm shall be bent in 90° on both side to from lock rail. 12mm (6mm x 2) thick, 20mm wide cross WPC sheet as gap insert for top rail & bottom rail. Panel will be of stainless steel. Wire mesh of 24 gauge to be fitted in by 'C' channel of size 32mm x10mm on the either side in the stiles. The inner side 'C' channel is fixed by 20mm x 40mm MS tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with 20mm x 40mm tube with stainless steel, wire mesh. 12mm (6mm x 2) thick PVC strip of 20mm width is to be stuck & nails on both side of stainless steel wire mesh gauge interior at the top, bottom & lock rail. 10mm x 20mm stainless steel pipe grill fix with MS frame for support wire mesh as per slected design an additional 6mm thick WPC strip of 22mm width is to be stuck on the interior side of the 'C' channel using solvent cement adhesive etc, complete as per direction of the site engineer.

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standed aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed

Forming jambs etc to openings incl cuttings too things and bondings into old work incl facing and pointing to match existing work complete in CM 1:4 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail paneling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

M&L PCC (1:2:4) type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed.

S&F in repair 12 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboard shutters, partitions, shelves, pelmet boxes or narrow widths and similar work complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F butt hinges medium weight stainless steel 100 mm size complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm complete all as specified and directed.

S & F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 25 mm dia., Aluminium alloy anodised fancy curtain rails with brackets fixed in repair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality exceeding 0.5 sqm each pane complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections / hardstanding, finished even and smooth w/o using extra cement complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square / rectangular) doubble charged polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 20 mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed.

All as per item No. 52.00 but as in skirting/dado but over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & incl 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm / 450 x 300 x 7mm thick of highliter pattern, set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl. 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Dismantling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete.

Dismantling water tanks and removing to store exc 250 and n.exc 500 ltrs complete.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directed in SSR Pt I

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directed in SSR Pt I

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15mm dia complete.

All as per item No. 60.00 here in before, but 20 mm dia .

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 25mm.

All as per item No. 62.00 here in before, but 20 mm dia

S&F Stop Valve 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed in repairs (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Wash basins 550 x 400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackets 10 litres capacity complete all as specified and directed.

S&F in repairs Vitreous china Squatting pan, 'Orissa pattern, size 580 x 440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

S&F in repairs Vitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in repairs chromium plated 15 mm bore Push taps cast copper alloy high pressure screwed for iron/CPVC pipe for urinal complete all as specified and directed.

S & F PVC Connections 15mm size with PTMT nuts of length 600 mm complete.

M&L in repair PVC (SWR) floor trap 75 mm, plain with CP grating including joining with solvent cement complete all as specified and directed.

S&F bib taps 15mm bore of standard PTMT any colour a high pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repair 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron/PVC pipe complete all as specified & directed.

S & F pillar taps 15mm bore of standard PTMT any colour a high pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F fancy type pillar taps, long neck, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges in repairs complete all as specified and directed.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union along with arm 225mm and flange.

S&F grating round 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white/CP, approximate size 160 x 160 x 90mmcomplete all as specified and directed.

Demolition of stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for Pre - cast cement concrete solid building blocks type C-1, 1:3:6 (20mm graded stone aggregate) setting in cement mortar 1:6 complete all as specified and all as directed by Engineer-in-Charge.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L for rendering 5mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation on newly plastered surface of ceiling for painting and applying 3 mm thick wall care putty on plastered surfaces and applying two coat of oil bound distemper over chalk whitin complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid separately.

Supply only water proofing compound.

M&L for preparation on newly plastered surface of wall for painting and applying two coat of cement base paint complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation on newly plastered surface of wall for painting and applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting complete all as specified and directed.

M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth complete all as specified and directed.

Cleaning of storage water tank of PVC / HDPE of 500 Ltrs capacity staged over RCC roof / floor slab or similar place inside /outside buildings by removing float valves carefully, thoroughly cleaning the walls, floor and ceiling of the tanks, mouths of pipes etc., removing the dirty water, sludge and other depositions to a distance not exceeding 50 metres as directed by Engineer-in-charge and removing remaining sludge/dirty water to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-charge and as specified in particular specifications and refixing of float valves all as specified and directed by Engineer-in-Charge.

All as per item No. 94.00 above item in before but water tank of capacity 1000 ltrs

All as per item No. 94.00 above item in before but water tank of capacity 2000 ltrs

Cleaning of storage water tank of RCC/AC of 1000 Ltrs capacity staged over RCC roof / floor slab or similar place inside /outside buildings by removing float valves carefully, thoroughly cleaning the walls, floor and ceiling of the tanks, mouths of pipes etc., removing the dirty water, sludge and other depositions to a distance not exceeding 50 metres as directed by Engineer-in-charge and removing remaining sludge/dirty water to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-charge and as specified in particular specifications and refixing of float valves all as specified and directed by Engineer-in-Charge.

All as per item No. 97.00 above but water tank of capacity 2000 ltrs

Writing letters “TANK CLEANED ON DD MM YYYY” of not exceeding 7.5cm high each letter, painted with black letters on sufficient white back ground on external visible face of water tank with synthetic enamel paint complete all as specified and as directed. Note:- Complete letters on each tank will be measured as one unit.

S & F in repairs Ball brass valves 15mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

Dismantling old particle boards/ plywood as in shelves boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittingscomplete all as specified and directed.

M&L for surface preparation including demolition by mechanical means to remove all loose particles, laitance, oil and grease etc and treating and finishing the sunken portion of water closet area by sealing the edges of holes through which sanitary pipes are entering the sunken portion, using seal tape and grout the gaps using a non-shrink cementitious grout (Dr Fixit Pidicrete URP or equivalent of Fosroc / STP / Krishna Conchem), providing 10mm thick rendering in cement mortar 1:3 with and including water proofing compound. Apply first coat of WPC (cementitious product with acrylic emulsion polymer as binder using Dr. Fixit Pidifin 2K of Pidilite Industries or equivalent of Fosroc/ Krishna Conchem Products) in the sunken portion. Immediately cover all the angle fillets with a 150mm wide strip of open woven glass fiber mesh of 2mm x 2mm. Apply the second coat of WPC after the first coat dries completely and allow it to dry completely, providing necessary connection items suitable for water closet and providing lime concrete complete all as per manufacturer instruction and as directed by Engineer-in-Charge.

M &L for Plain Cement Concrete Type E2 1:5:10 for filling in sunken floor complete all as specified and directed.

M&L PCC 1:3:6 type C-2, 75 mm thick padding to required slop in sunken finshed even and smooth without using extra cement complete all as specified and directed.

S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kg/ Sq. Cm., fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

CVS CONSTRUCTIONS (BID ID -3477844)

K M SUBHANAIAH (BID ID -3477367)

KIRAN TRADERS (BID ID -3477223)