Construction Work of ETP at District Hospital HINDAUN, Karauli

Construction of C.C. Platform (01 No.) for (10 KLD) ETP Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

) All Kind of Soil

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:

) Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :

) 20mm thick.

Supply and installation of Multi Rib Proofing/ cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumessel ( as per 150gsm zinc aluminum coated 550Mpa tucked strength)confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated box head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum upto 12mts with all scaffolding.

) 0.60mm thick

Construction of Collection Tank FOR (10 KLD) ETP : Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

) All Kind of Soil

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :

) 20mm thick.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.

Construction of Panel Room (8' x 10') : Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

) All Kind of Soil

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:

) Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in.

) Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows fixed

Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint : MS Sheet 18 S.W.G.

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :

) 20mm thick.

Grading roof for water proofing treatment with water proffing compound : Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001 to 5000 Sq.Cm, 25mm thick

Electrical Work : Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.Gr 1

) Short point (up to 3 mtr.)

) Medium point (up to 6 mtr.)

) Long point (up to 10 mtr.)

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.Gr 1

) On board

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.G1

P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.G1

) Double door (single phase)

P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1

) Single pole MCB

) 6 A to 32 A rating

) Double pole MCB

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.GROUP 1

P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required

) 5 step fan regulator 2 ModuleGr 1

P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1

) 450 mm sweep(900/1400 RPM)

P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd.

) Up to 380 mm size

P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1 (armoured) In existing RCC/HUME/STONEWARE PIPE

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

) 25 mm Dia.

Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping.

) Unarmoured Telephone cable in existing surface or recessed conduit/casing capping.

Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm

) Single Aperture

Connection for ETP work : Excavating trenches of required width for pipe cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr.: Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. All kinds of soil

Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe).150mm dia S.W. Pipe.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. : 1: 3: 6 or richer mix.

Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr

Add extra over item 3.21.1 for every addl. 0.10mtr depth above 0.5m depth.

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant : 160mm dia

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

) ETP Plant

Construction of effluent treatment plant capacity of 10 KLD with all treatment unit as mentioned below: -

) 01 Nos. Bar screen MOC of SS cleaing manual with 12 mm spacing

) 2 nos. (1W+1S) raw effluent transfer pumps Non colog impellar Cast iron make KSB/Kirlokar or equivlant capcity 2 HP

) 2 nos. suction screen size Dia 8" x 2 mtr. MOC - PP+FRP (5mm+5mm), screen hol size 6 mm & screen support mild steel +eproxy painted for raw effluent transfer pumps

) 2 nos. Remote type Electromagnetic flow meter with totalizer at inlet & outlet size DN25 MOC SS with PTFE lined make Unitech or equivlant

) PH correction tank capacity 350 ltr.with agitation mechanism square type MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR), Agitator motor C.G./BB/Eq. Gear box Premier/Eq. RPM - 90 shaft SS316 marine type agitator.

) chemical coagulation tank capacity 350 ltr.with agitation mechanism square type MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR), Agitator motor C.G./BB/Eq. Gear box Premier/Eq. RPM - 90 shaft SS316 marine type agitator.

) Flocculation tank capacity 400 ltr.with agitation mechanism square type MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR), Agitator motor C.G./BB/Eq. Gear box Premier/Eq. RPM - 20 shaft SS316 Angle shrinks type agitator.

) 01 nos sedimentation tank capacity 3500 ltr. rectangular with conical bottom type MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR), Media- tube peck type media Mc-PVC typre groove & tongue shape Hexagonal with media support screen MS+FRP lined

) 01 nos PH correction dosing tank capacity 150 ltr.with dosing pumps 2 nos. (1W+1S) tank capacity 100 ltr. MOC PP+ FRP lined thickness 10 mm,Dosing pumps type metering, capacity 0 to 10 LPH make MROY/E.Dose

) 01 nos Coagulant dosing tank capacity 150 ltr. with dosing pumps 2 nos. (1W+1S) tank capacity 100 ltr. MOC PP+ FRP lined thickness 10 mm,Dosing pumps type metering, capacity 0 to 10 LPH make MROY/E.Dose

) 01 nos Flocculent dosing tank with dosing pumps 2 nos. (1W+1S) tank capacity 150 ltr. MOC PP+ FRP lined thickness 10 mm,Dosing pumps type metering, capacity 0 to 10 LPH make MROY/E.Dose

) 01 Nos. Tertiary feed tank/Feeder feed tank capcity of 2000 ltr.type square MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR)

) Tertiary feed pumps/filter feed pumps 2 nos. (1W+1S) mono block pressure feed pumps MOC cast iron Make KSB/Kirloskar or equivlant 2 HP

) 1 Nos. MGF/PSF filter with MOC FRP vessel 10 kg/cm2 pressure MPV- 01 nos media natural River pebble & sand media.

) 01 Nos. ACF filter MOC - FRP Vessel 10 kg/cm2 pressure MPV 1 Nos. media- activated carbonmedia having lodine value-1000 PPM coconut based, Size 4/8 mm

Sludge Dewatering

) Sludge dewatering unit

) 1 nos sludge collection/filter press feed tank capacity 1000 ltr. Square type MOC MS+inside FPR lined & outer side epoxy painted thickness 10 mm (6 mm at MS + 4mm at FPR),

) Tertiary feed pumps/filter feed pumps 2 nos. (1W+1S) screw/sludge type MOC SS/CI Make Roto/Kirloskar or equivlant

) Filter press 01 Nos. size 18"x18" MOC- MS+Epoxy painted PP recessive filter press manual type, filter clothes- PP butterfly type make Enviro or equivlant

) Sludge collection trolley 1 nos. with MOC MS+epoxy painted

Instrumentation work

) 1 lot of instrumentation units i.e. Pressure gauges, level controllers, PH meters, Diaphragm etc. make Mico/H.Guru/Aster/Eutech or equivlant