Construction of Balance Works for Upgradation of Sri Krishna Medical College,Muzaffarpur (Bihar)

Amount

CIVIL ITEMS WORK

SUB HEAD-I :- EARTH WORK

Earthwork in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth irrespective of lead and lift upto 1.5 m, disposed soil to be levelled and neatly dressed All kinds of soil Note: Top layer of soil to be stacked as per GRIHA requirement.

Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden of steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., irrespective of lead and lift upto 1.5 m, disposed soil to be levelled and neatly dressed All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, irrespective of lead and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, irrespective of lead. All kinds of soil.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, irresepective of lead. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, irrespective of lead and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All Kinds Of Soil

Supplying and filling in plinth with River sand under floors, including watering, ramming, consolidating and dressing complete.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto irrespective of lead outside the periphery of the area cleared.

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.

treatment of soil under under existing floors using chemical emulsion @ one liter per hole ,300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 coarse sand ) to match the existing floor :

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.

SUB HEAD-II :- CONCRETE WORKS

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering,shuttering complete.

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

SUB HEAD-III :- REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Weather shade, Chajjas, corbels etc., including edges

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).

Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Steel reinforcement for R.C.C. work Of Fe500. including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars

Steel reinforcement for R.C.C. work Of Fe 500 including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Concrete of M30 grade with minimum cement content of 350 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Concrete of M30 grade with minimum cement content of 350 kg /cum

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

200 mm wide.

300 mm wide.

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it’s components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM 6063.)

Floor Joint of 100 mm gap

Providing and fixing of expansion joint system related with wall joint (external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063)

Wall Joint of 100 mm gap

SUB HEAD-IV :- BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Extra for brickwork/ AAC block masonary / tile brick masonary in superstructure, above floor V level for each four floors or part thereof by mechanical means.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level.

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

SUB HEAD-V :- MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab upto 0.50 sqm (Granite having basic rate not less than Rs.1900/-per sqm.)

Area of Slab over 0.50sqm (Granite having basic rate not less than Rs.2000/-per sqm.)

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work.(Granite having basic rate not less than Rs.2000/-per sqm.)

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Mirror polishing on Kota/ marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

Wedge expansion type

Fastener with threaded dia 10 mm

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In- Charge.

Upto and including 12mm dia.

Rebaring of reinforcement bar having diameter 8mm, 10mm, 12mm, 20mm, 25mm, inclusive cost of chemicals for filling as applicable depth in different dia complete in all respect as per direction of Engineer-in-charge. (WEIGHT OF STEEL TO BE PAID SEPARATELY)

16mm Bar

20mm Bar

25mm Bar

SUB HEAD-VI :- WOOD AND PVC WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):

Rectangular or square.

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerin-charge.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).

Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587

Providing and fixing S.S. tower bolts ISI marked with necessary screws etc. of approved make complete as per direction of Engineer-in-charge :

Providing and fixing S.S. handles with necessary screws etc. of approved make complete as per direction of Engineer-in-charge :

Providing and fixing S.S hanging floor door stopper of approved design & make with necessary screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing 100 mm Stain less steel mortice latch and lock with six levers and a pair S.S. lever handles with necessary screws etc. complete in all respect of approved make as per direction of Engineer-in-charge.

50MM THCK WOODEN FIRE RATED DOORS OF 120 MINUTES FIRE RATING

Supply and fixing of 2nd class teakwood - door frame of section 120 mm x 70 mm with heat activated intumescent fire seal strip of section 10 mm x 4 mm 2 no. of Sealz, Fire & Acoustic , of approved make . The frame shall be duly primered with FR retardant primer FR880 type primer and FR Paint FRS type. The frame shall be fixed in existing opening with thr help of anchor fastener 8mm dia 10 cm long size complete as per direction of Engineer in Charge.

Providing and fixing of minimum 50mm thick Wooden fire rated door shutters tested as per BS: 476 Part- 20 & 22 & IS 3614 Part-2 for stability, integrity and thermal insulation. Recommended fire door shall have doors tested at CBRI for maximum rating of 2hrs tested either with or without vision panel. Individual Test certificates should be available for glass used in vision lights confirming the required fire ratings. The shutter should be maximum 52 mm thick up to commercial ply facing and lamination, if required should be over and above. The core insulation should be asbestos free comprising of two 12 mm thick Calcium Silicate boards of Pamtech type , a 100% without Asbestos, having density not more than 900Kg/M3 and thermal conductivity 0.14 W/m*K with non-combustibility as per BS 476 part 4-1970 and class-1 surface spread as per BS-476 Part-7-1971 . These boards sandwiching 20 mm thick fire resistance insulation filler faced with 03 mm thick commercial ply facing on both faces. The shutter is provided with heat activated in tumescent fire seal strip of size 20mm x 4 mm mounted in the grooves of 2nd class teak wood Exposed lipping on all sides except bottom. The intumuscent fire retardant sealant should be used to fill the gaps between civil opening and frame along with wool insulation so as to fill any visible gap. The manufacturer should submit desired design test report for a design tested earlier for 120 minutes fire rating along with Vision Panel tested at CBRI Roorkee as per directions of Engineer in Charge. (a) Door Shutter with 1mm thick Laminate Facing.

Providing & fixing fire rated glass i.e. two number toughened glasses 4mm thick each & sandwitched with foaming integrated Gel 3mm thick vision pannel of approved make total thickness minimum 11 mm, 120 minutes fire rated EW-120 & EI-15 conforming to NBC of India-2005 (EW - Entegrity + Radiation Limit & EI - Entegrity +Insulation) complete as per direction of Engineer in Charge.(actual vision pannel area will be measured.)

Providing & fixing following Hardware's for Fire Door of approved makes complete in all respect as directed by Engineer-in-charge Supply and fixing of 304 grade stainless steel ball bearing hinges of size 100x 75 x 3mm with necessary SS screws etc. all complete of approved make as per direction of Engineer in Charge.

Providing and fixing of MS Powdered coated 2 hours fire rated door closer tested in accordance with BS:476 Part 22 for fire rating) and BS EN 1154 with 10 year warranty as per direction of Engineer in Charge.

PANIC EXIT DEVICES : Providing and fixing of UL listed fire rated single/double leaf panic exit devices tested in accordance with BS EN 1125: 1997 & BS EN 179: 1997, EN 1670 (Corrosion Resistant), & BS 476 Part 22 (for fire rating) complete in all respect with 5 years warranty as per direction of Engineer in Charge.

For Double Leaf door

MORTICE DEAD LOCK:- Providing and fixing 2 hrs, fire rated mortice lock with lever handle tested in accordance with BS:476 Part 22.with 5 year warranty of approved make complete as per direction of Engineer-incharge

Supply and fixing of stainless steel 304 Grade D - Type pull handle of size 300mm long 22mm dia with necessary screws etc., complete in all respect of approved made as per direction of Engineer-in-Charge.

Supply & application of fire retardant paint of approved brand in three or more coats after application of suitable primer to provide Class I surface spread of flame as per IS 12777 and BS 476 Part 7 tested from CBRI Roorkee or any other Laboratory approved by Engineer-in-Charge.

Providing and fixing SS 304 panic trim fitted with a single / double Panic Bar of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

SUB HEAD-VII :- STEEL WORK

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Using M.S. angels 40x40x6 mm for diagonal braces

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Exceeding 10.00 sqm and upto 16.80 sqm in the area.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia.M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Electric resistance or induction butt welded tubes.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

M.S. tube

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

SUB HEAD-VIII :- FLOORING

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Dark Shade pigment using Ordinary cement

Ordinary cement without any pigment

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slabs.

Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre .

Providing and fixing rectified Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Note: - The vitrified tiles for all the above items shall be from the double/multi charged range of tiles.

Size of Tile 600x600 mm

Granite stone flooring with 18mm thick mirror polished & pre polished machine cut granite stone flooring of required size, shape of and of approved shade, colour and texture ( sample of Granite shall be approved by Engineer in charge) laid over 20mm average thick base of cement Mortar 1:4 ( 1 cement : 4 coarse sand) laid and jointed with white cement mixed with matching pigment, epoxy touch ups etc. i/c rubbing and polishing - Granite stone etc. complete as per direction of Engineer-incharge. (Granite having basic rate not less than Rs.2000/-per sqm.)

Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining,skirting and dado (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade complete as per direction of Engineer-incharge. : (To be secured to the backing by means of cramps, which shall be paid for separately).(Granite having basic rate not less than Rs.2000/-per sqm.)

Extra for pre finished nosing to treads of steps of Granite stone complete as per direction of Engineer-incharge.

Extra for Granite stone flooring in treads of steps and risers using single length up to 2.00 metre complete as per direction of Engineer-incharge.

Providing and fixing Vinyl flooring of 2mm thick 100% recycled PVC flexible, homogeneous antistatic calendared compacted floor covering, minimum weight 3120 g/m2 in minimum sheet of size 2mtrs. x 20 mtrs. approved pattern & colour combination with PUR Protect or equivalent surface treatment having wear minimum resistance of ≤ 4.0mm3 as per EN 660.2 and wear group Group P as per EN-649 and should have a minimum residual indentation of <0.03mm confirming to EN-433. The laid flooring should have non- directional design, colour dyed as a raw mixture to ensure even colour throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti-bacterial and Fungicidal properties. The laid flooring shall confirms the fire rating B1 class as per EN 13501-1. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring.

Providing of 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent approved as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent approved as recommended by the Vinyl sheet flooring manufacturer on concrete surface to provide a smooth & homogenous surface inclusive adhesive for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge.

Providing and fixing of approved make flexible PVC sheet wall cladding in 1.25 mm thickness in the size of 1.83x30mtr with polyurethane surface treatment, with the testing results of inhibits the growth of MRSA in the walls with the clean room certification. Homogeneous PVC Vinyl wall covering with total weight 2120 g/m2 polyurethane shield, dimensional stability ≤0.40%,wetroom test qualified, good resistance to chemical & fire, anti fungi & bacterial growth, class A in clean room test and available in various color shade. Equivalent to Polyflor Ployclad PRO

Providing & laying heavy duty coloured Epoxy flooring, complying with flooring requirements as per Good Laboratory Practices norms as detailed: Providing and laying 4mm thick high density epoxy based heavy duty industrial screen flooring and topped with 1mm thick of self levelling compound to achieve total thickness of 5mm.This system will make a smooth surface and will be used to take load movements on air casters. The floor shall also offers resistance to absorb water, oil and industrial chemicals etc and shall be very easy for cleaning the surface. Maximum expected ambient temperature can be very high even more tha room temperature. Flexible modified epoxy for crack bridging, impact absorption and application over substracts with high difflection or vibration. Epoxy flooring composition system shall be a resin rich composite with low viscosity, clear epoxy primer for maximum bond potential.100% solids, top coat for final seal. Matrix coating system shall consists of prime coat, screed coat and topping coat. The primary coat shall be a two component full solid coating with excellent bonding on to concrete surface. The application is by lambskin short pile roller / screeder at a spreading rate of 0.25 to 0.75 kgs per sqare meter. Total builtup thickness should be 200 micron.

Primary coat shall be allowed to get track free before application of heavy duty industrial screed. The Screed coating, base lining shall be done with a three component solvent free epoxy urethane urea screed to fill the post holes / dents on the base floor and level the undulation / pot holes of the base floor. The spreading rate for this is to be determined by the extent of levelling required for the base floor and thickness that is proposed to built up as per directions of Engineer in charge. The built up thickness of this screed floor shall be arround 3000 microns. The screed shall be kept for curing upto 4 to 5 hours to get workable strength for next proceedure. An intermediate coat (Base coat) is to be applied to avoid any pinholes, waviness etc. The Top finish coat shall comprise of Two component epoxy urethane urea coating which is applied by lambs wool roller / roller notched trowel . Total built up thichness shall be arround 2000 microns. Dust & dirt has to be removed from the surface before starting the top coat.The colour pigment shall be added to achieve the necessary finish colour as approved and directed by Engineer in charge.

The rate shall also include surface preparation such as Acid itching wherein acidic water shall be used to clean the floor by means of scrubber & washing with sufficient water, the oil, grease & foreign particles are to be cleaned properly from the surface. The process shall also include cleaning of the soaked oil to get good bonding of the epoxy floor & durability. Burning procedure shall be carried out (if required) to remove the oil till the floor become bright white / desired colours. The pot holes and expansion joints (if any) are to be filled with the suitable material. The pot holes shall be filled & levelled with pot filling compound. Similarly the cracks & expansion joints shall be filled with crack seal compound, having the expansion & compression properties as per the surrounding temperature. After final coating, it should be kept for 24 hours for functional cure. Self levelling compound can be applied if required to make the surface smooth and levelled. The cement concrete flooring shall be however measured under item No 73A and paid for seperately. The rate quoted for this item shall be only for epoxy flooring system for the operations and procedure duly mentioned herein the item.

Providing and laying 8mm thk Laminated Wooden flooring of approved make in a design combination as per the drawing & instructions on levelled floor, insulating the areas, surface preparation, bedding, finishing etc complete as per the directions and instructions of the Engineer-in-charge. The rate shall be inclusive of edge moulding & end strips at the junction between the floor and the vertical surfaces and mouldings, T grooves and shall also include the underlays as per manufacturers specifications to achieve accoustical & thermal insulating properties etc complete.

Flooring

Skirting

Floor strip on edges 20cm in width

SUB HEAD-IX :- ROOFING

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Supplying and fixing 16 mm th. polycarbonate sheet of approved make and shade on plain or curved profile roof sheeting with anodised aluminum beading over structural steel member (structural steel members shall be paid under relevant tender item ) fixed with GI bolts or EPDM coated self tapping screws with EPDM sealing washer with filling the gaps with silicon sealant. Item rates shall include cost of plastic caps of approved colour of U V resistance, sealant wherever required, overlaps, wastage etc complete as per drawing and direction of Engineer in -Charge. The work shall be carried out for all heights with scaffolding, labour tools etc. without any extra cost..

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Flashings/ Aprons.( Upto 600 mm)

Gutter .(600 mm over all girth)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 ement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

SUB HEAD-X :- FINISHING WORK

12 mm cement plaster of mix :

1:6 (1 cement : 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand)

18mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand)

6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

White washing with lime to give an even shade :

New work (three or more coats)

Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm

Paiting with silicon and acrlyic emulsion based water thinable sealer of approved brand and manufacture on wet or patchy portion of plastered / stone finished surfaces

Two Coats

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.

On steel work

On concrete work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coat

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre

With water thinable cement primer on wall surface having VOC content less than 50 gm/ litre

Providing & laying Anti bacterial/Anti fungal paint having Low VOC on interior wall on new surface with two or more coats of desired shade & approved make as per manufacturers, specifications . The item rate to be inclusive of primaring, filling cracks & holes etc with approved make. Acrylic wall putty/Crack seal compound etc complete in all respect as per direction of Engineer in charge.

Providing & fixing 24gauge Chicken wire mesh on joints of RCC & Brick work before plastering including nails etc. complete as per the direction of Engineer-in-charge.

SUB HEAD-VII :-ROAD WORK

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Supplying and stacking at site.

90 mm to 45 mm size stone aggregate.

63 mm to 45 mm size stone aggregate.

53 mm to 22.4 mm size stone aggregate.

Stone screening 13.2 mm nominal size (Type A).

Stone screening 11.2 mm nominal size (Type B).

Red bajri

Good earth.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-30 grade with approved color design and pattern.

Providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing placing & fixing Precast Concrete Grass Grid Pavers of 70 mm Thickness and appropriate size, laid over compacted earth and over 75 mm thick layer (average) of Yamuna sand, manufactured by using M-30 grade of concrete by using vibro compaction process using accurately designed moulds. The Grass Grid pavers shall be suitably reinforced etc. complete in all respects as per direction of the Engineer-in-charge.

SUB HEAD-XI :- ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge.

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5.50 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.

Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge

Powder coated minimum thickness 50 micron aluminium

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing 12 mm thick toughened glass Partition of approved brand and manufacture, including top & bottom suitable Aluminium section etc. complete as per direction of Engineer-in-charge

Providing and fixing sliding arrangement in windows/racks/ cupboards/ cabinets shutter by roller to run inside C or E aluminium channel section of approved make and of approved specifiacion as approved by Engineer-Incharge.

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with I-LOCK of size (200mm x 25mm)of approved make and of approved specifiacion as approved by Engineer-Incharge.

SUB HEAD - XII - WATER PROOFING WORK

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

Using rough kota stone.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :

Using rough Kota stone

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs

c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin-Charge

Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Structural Glazing and Aluminium Composite Panel

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:

Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.

Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.

Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.

Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, nstallation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for ccupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories

Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”

Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 33109 testing method for a range up to 2000 ml.”

Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”

Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME330-10 testing method for a range upto 50 mm”

Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:

a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

SUB HEAD-XIII :- MISCELLANEOUS WORK

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5

Circular shape 560 mm internal dia

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing & fixing of stretcher guard/Hand rail comprising 2 mm thick smooth PVC profile with a section depth of 157 mm achieving Class 0 fire-rating and solid colour, the system combines a completely smooth tubular upper part and lower wall protection rail with diameter 38mm inside section provided 100mm x 25mm with decorative grooves. The PVC profile snap fixes to a continuous aluminium section and finish is provided by smooth PVC finishing accessories with decorative grooves (wall returns, external 900 and variable angle pieces from 910 to 1350). The unit is fitted in the spacer with an adjustable aluminium clamp.

Providing and fixing of Care4 Corner Protector with self adhesive tap with 30mm wide wings (internal measurement), 900 of 2.0mm thick comprising of smooth and antibacterial PVC profile achieving class Bs2d0 fire-rating with solid colour. It is provided with two strips of self adhesive tap for fixing. No heavy metals are used in its manufacture and the calcium-zinc thermal stabilization process is used.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material irrespective of lead as per direction of Engineer-in-charge.

In cement mortar

Demolishing C.C. /R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials irrespective of lead, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Making provision for contraction / expansion , construction & longitudinal joints (upto 10mm x 50mm deep) by grove cutting machine, providing and filling joints with approved joint filler and sealent , complete as per direction of engineer-in-charge

SUB HEAD-VIII :- Horticulture & Landscaping

Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.

All kinds of soil

Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment).

Supplying and applying of Chemical fertilizer and Organic manure of approved make and quality, before and after as per requirement and direction of Engineer - in - Charge.

DAP / NPK(25gm/sqm) or as per direction of Engineer - in - Charge.

Bone Meal(150gm/sqm) or as per direction of Engineer - in - Charge.

Neem Cake(150gm/sqm) or as per direction of Engineer - in - Charge.

Supplying and stacking at site dump manure from approved source, including carriage up to 5 km Complete (manure measured in stacks will be reduced by 8% for payment) :

Screened through sieve of I.S. designation 20mm

Rough dressing the trenched ground including breaking clods.

Fine dressing of the ground

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge..

Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8 nos flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground , including refilling the earth, compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect.

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge their Maintenance for one Year, mixing the soil with decayed farm yard/sludge mannure, planting the saplings,backfilling the trench, watering, fixing the tree guard and maintaining the plant for one year as per direction of Engineer-incharge.(excluding cast of plant)

Trees Plant

Shrubs Plant

Hedge/Ground cover Plant

Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Dianella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge.

PLUMBING WORK ITEMS

SUB HEAD-SANITARY INSTALLATIONS

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap with white PVC dual flushing cistern of approved make of flushing capacity 3 litre/ 6 litre (adjustible to 4 litre/ 8 litre) including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, with white PVC dual flushing cistern of approved make of flushing capacity 3 litre/ 6 litre (adjustible to 4 litre/ 8 litre) conforming to IS : 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basins with C.I. Brackets,C.P. brass pillar tap auto closing type, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls and floors where required.

White Vitreous china Wash basin of size 630 x 450mm with single 15mm C.P brass pillar tap auto closing type of approved make.

Providing and fixing wash basins with C.I. Brackets,C.P. brass pillar tap auto closing type, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls and floors where required.

White Vitreous China Wash basin size 630 X 450 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china oval wash basin for top/under counter mounting 15 mm C.P. brass pillar tap of auto closing type with pop-up waste, 32 mm C.P. brass bottle trap and pipe to wall with C.P. wall flange and rubber adopter for waste connection complete, including cutting and making good the walls wherever required.

Oval washbasin size 195X600x425 mm under counter basin with 15 mm C.P. brass pillar tap auto closing type of approved make

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite stone of approved shade (Rate of granite Rs. 1800/- per sqm)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board

510x1040 mm bowl depth 250 mm.

Providing and fixing white vitreous china laboratory sink with C.I. brackets,C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Size 450x300x150 mm

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of required size

Providing and fixing toilet paper holder :

C.P. brass

Providing and Fixing soil,waste and vent pipes:

100 mm diameter

Centrifugaly cast (spun) iron socket & spigot (S&S) pipe as per IS:3989

Testing commissioning and handing over of soil,waste and vent pipes in all respect including providing pipe support, chasing, joint,bend etc.

75 mm diameter

Centrifugally cast (spun) iron socketed pipe as per IS:3989

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :

For 75 mm dia pipe

Providing and Fixing bend of required degree with access door,insertion rubber washer 3 mm thick,bolts and nuts complete.

Sand cast iron S & S as per IS-3989

Sand cast iron S&S as per IS- 3989

Providing and Fixing plain bend of required degree.

Sand cast iron S&S as per IS : 3989

Sand cast iron S & S as per IS-3989

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S & S as per IS:3989

75 mm dia

Sand cast iron S & S as per IS -3989

Providing and Fixing double equal junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete:

100x100x100x100 mm

Sand cast iron S & S as per IS:3989

Providing and Fixing single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete:

Sand cast iron S & S as per IS:3989

Providing and fixing terminal guard :

100 mm dia

Sand cast iron S & S as per IS:3989

75 mm dia

Sand cast iron S & S as per IS -3989

Providing and fixing collar:

Sand cast iron S & S as per IS-3989

Providing lead caulked joints to sand cast iron /centrifugally cast (spun) iron pipes and fittings of diamter :

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diamter :

Providing and Fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

100 mm inlet and 100 mm outlet

Sand cast iron S & S as per IS:3989

Providing and fixing Nickel Chromium Plated Bottle Trap (with internal partition) 32mm size with 250 mm & 190 mm long valve connection pipes & valve flange wih minimum 25 mm water seal (Nickel chromium plating should pass Salt Spray Test for 200 hours) of approved make for Wash basin, Urinals & Sink complete as per direction of Engineer in Charge.

Providing & fixing Nickel Chromium Plated liquid soap container/dispenser with metallic bottle of 51 mm dia & 122 mm height (Total height 162mm) of approved brand & make 112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge.

Providing and fixing Nickel Chromium Plated towel ring circular shape 178 mm dia of 6 mm round solid bar with concealed fittings arrangement (Nickel chromium plating should pass Salt Spray Test for 200 hours) of approved quality and colour, of approved brand & manufacture complete as per direction of Engineer in Charge.

Providing and fixing Nickel Chromium Plated towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, of approved brand & manufacture complete as per direction of Engineer in Charge.

600 mm long towel rail

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.

Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white viterous china flushing cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litre), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing, uPVC pipes 6 Kg/Cm2 (IS: 4985) of approved brand & manufacture including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints including required suports,cutting chase or holes in walls and floors and making good where required of approved brand & manufacture complete as per direction of Engineer in Charge.

Testing commissioning and handing over of uPVC pipes 6 Kg/Cm2 (IS: 4985) of 160mm OD in all respect including providing pipe support, chasing, joint,bend etc.

Providing and fixing C.P. brass twin coat hooks of approved brand & manufacture fixed on toilet door with C.P. brass screws including all fittings complete..

Providing & fixing Hand Shower (Health Faucet) with 8mm Dia,1 Metre Long Flexible Tube & Wall Hook of approved make and manufacture complete as per direction of Engineer in Charge.

Providing and fixing of fully automatic "NO TOUCH" durable & shock proof hand drier of approved make & manufacture suitable to operate on 220 volts, single phase 50 hz, A.C. power supply, 1500 Watt and directly plugged to power point complete in ABS plastic body having drying time 20-30 seconds complete as per direction of Engineer in Charge.

Fully automatic Hand Drier

Providing and fixing multi-floor trap fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100/150 mm dia upvc pipes and sockets,fixed to C.I. trap with lead caulked joint and set in cement concrete as per standard drawing complete as directed by Engineer-incharge.

Providing and fixing in position 110x63 mm reducing elbow including fixing to floor with cement mortar etc. complete in all respect as directed by Engineer-incharge.

Providing and fixing cleanout plug( Ceiling or Floor) with suitable inset keys for opening, male threaded joint with socket fixed to SCI pipe complete in all respects as directed by Engineer-incharge

100 mm pipe size

Providing & fixing C.P. brass single hole basin Mixer Tap with aerator of approved make complete in all respect as directed by Engineer-incharge

Providing & fixing BEE 5 Star rating water heater (geyser) of capacity 25 litres, of approved make complete in all respect as directed by Engineer-incharge

SUB HEAD-18.0-WATER SUPPLY

Providing & fixing Chlorinated plolyviny Chloride (CPVC) Pipes, having thermal stabilty for hot & cold wter supply, includign all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampls at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.

Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

Testing commissioning and handing over of Chlorinated plolyviny Chloride (CPVC) Pipes of all dia pipes in all respect including pipe support, chasing, joint etc.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.

INTERNAL WORK - EXPOSED ON WALL

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Testing commissioning and handing over of G.I. pipes complete of all dia pipes in all respect including pipe support, chasing, flange replacement,joint, all fittings etc.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

EXTERNAL WORKS

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

25 to 40 mm nominal bore

50 to 80 mm nominal bore

80mm and above nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end )

25 mm nominal bore.

32 mm nominal bore.

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions

45 cm length

15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Providing & Fixing C.I.sluice valve(with cap) complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately)

100 mm dia.pipe

Class II

150 mm dia.pipe

Class II

Constructing masonry Chamber 30X30X50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 Cement : 4 Coarse sand) for stop cock, with C.I. surface box 100*100*75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 Cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90X90X100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with channel lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work

15 mm diameter pipe

20 mm diameter pipe

25 mm diameter pipe

32 mm diameter pipe

40 mm diameter pipe

50 mm diameter pipe

Painting of GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

a) 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore.

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approvedquality confirming to IS:8931

15 mm nominal bore

Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge.

Circular Type

125 mm nominal dia

Providing and fixing CP angle stop cock 15mm nominal bore of approved brand complete as directed by Engineer-incharge

Providing & fixing CP soap dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements

Providing and fixing GI pipes complete (IS:1239 medium class) with GI fittings and clamps including MS pipe supports, enamel paint as per speicifications cutting and making good the walls etc. complete as directed by Engineer-incharge

65 mm dia. nominal bore

80 mm dia. nominal bore

100 mm dia. nominal bore

150 mm dia. nominal bore

Providing and Fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.

15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing and fixing C.I. butterfly valves PN-1.0 complete with bolts, nuts, EPDM S.S. Disc flanges Lever oprated as per IS 13095 complete.

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing & fixing cast iron Slim seal dual type non-return valves (PN1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer complete as required.etc. of following sizes.

100 mm dia

150 mm dia

Providing and laying of HDPE pipes confirming to IS: 4984 type PE-80 (6 kg/cm2) including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including necessary excavation and refilling complete in all respects. (For irrigation water Supply )

Providing and fixing Thermoflex or Careflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification.

9 mm thick

For 20 mm dia Pipe

For 25 mm dia Pipe

For 32 mm dia Pipe

For 40 mm dia Pipe

For 50 mm dia Pipe

For 65 mm dia Pipe

SUB HEAD-19.0- DRAINAGE

Providing, laying, jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement;1 fine sand ) including testing of joints etc. complete:

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) up to haunches of S.W.pipes including bed concrete as per Standard design :

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing and fixing square-mouth S.W. gully trap grade 'A" complete with C.I. grating brick masonry chamber with water tight RCC cover of 300x300 mm size ( inside ) Kg as per standard design :

150x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc complete:

100mm dia RCC pipe

150mm dia RCC pipe

250mm dia RCC pipe

300mm dia RCC pipe

450mm dia RCC pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including pre-cast RCC Manhole Cover and frame of of Circular shape 450mm internal diameter

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Inside size 120x90 cm and 90 cm deep including pre-cast RCC Manhole Cover and frame of of Circular shape 450mm internal diameter

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra For Depth For Manhole

Size 90x80 cm

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

0.91 m deep with S.F.R.C cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 0.91 m internal dia (at bottom) with beyond 0.91m to 1.67m

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

1.68 m deep with S.F.R.C cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 1.22 m internal dia (at bottom) with beyond 1.68m to 2.29m:

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 1.52m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

2.30 m deep with S.F.R.C cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering esides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per pecifications and having manufacture’s permanent identification mark to be visible even after fixing,including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

SUB HEAD- 24.0 - RAIN WATER HARVESTING & BOREWELL

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different trata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

All Type of Soil

300mm dia

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

All Type of Soil

400mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

100 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

100 mm nominal size dia

150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed,measuring yield of well by “V” notch method or any other approved method,measuring static level & draw down etc. by step draw down method,collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

100 mm nominal size dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts f required size complete.

100 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

100 mm nominal size dia

Borewell Pump

Supply, installation testing & commissioning of submersible pumping set suitable to operate on 410 volts 3 phase 50 HZ A.C. power supply including water proof joint free cable, motor control panel, 100 mm dia, G.I. pipe (medium class) column with fittings, clamps etc. complete in all respect as per details given below :

Pump to be lowered below ground at : 170 M

Pump capacity : 15000 litres/hr

Head : 50 M

H.P : 5 ( Approx)

Cost of one set Tubewell

ELECTRICAL WORK ITEMS

The contractor shall be carried out liasoning including submission of application with supporting documents for obtaining 11KV HT connection from the concern state electricity authority as statury requirment.

Contractor shall obtain No objection certificate from concern electrical inspector authority before charging of 11/0.433 KV substation.

SUB HEAD - I : CIRCUIT CUM POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Group C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Testing & Commissioning of light point/ fan point/ exhaust fan point/ call bell point as described above

Group C

Wiring for twin light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit with 2 way modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Wiring for twin light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit with 2 way modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Testing & Commissioning of twin light point as described above

Wiring for power plug points with 2 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed steel conduit along with 1 No. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Testing and commissioning of wiring for power plug points with 2 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed steel conduit along with 1 No. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light plug points / power plug points with 4 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the follwing size of FRLS PVC Insulated copper conductor, single core cable in surface/ recess Steel conduit as required.

2x 1.5 sqmm+ 1x 1.5 sqmm earth wire

2x 2.5 sqmm+ 1x 2.5 sqmm earth wire

2x 4 sqmm+ 1x 4 sqmm earth wire

2x 6 sqmm+ 1x 6 sqmm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

4x 2.5 sqmm+ 2x 2.5 sqmm earth wire

4x 6 sqmm+ 2x 6 sqmm earth wire

4x 10 sqmm+ 2x 10 sqmm earth wire

4x 16 sqmm+ 2x 16 sqmm earth wire

Testing & Commissioning of Wiring for circuit/ submain wiring alongwith earth wire with the follwing size of FRLS PVC Insulated copper conductor, single core cable in surface/ recess Steel conduit as required.

2x 2.5 sqmm+ 1x 2.5 sqmm earth wire

2x 6 sqmm+ 1x 6 sqmm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

4x 10 sqmm+ 2x 10 sqmm earth wire

4x 16 sqmm+ 2x 16 sqmm earth wire

Supplying and fixing of following switch on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Testing & Commissioning of following switch & Socket on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying and fixing of Stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

Testing & Commissioning of Stepped type Electronic Fan Regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supply and fixing of following size/ modules, GI box along with modular base & cover plate for modular switch/ regulator in recess, including connection as required.

1or 2 module (75mmx 75mm)

3 module (100mmx 75mm)

4 module (125mmx 75mm)

6 module (200mmx 75mm)

8 module (125mmx 125mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular type switch, connections painting etc. as reqd, for Light plug point.

Testing & commissioning of suitable size GI box with modular plate and cover in front on surface or in recess including testing& commissioning 3 pin 5/6 Amp modular socket outlet and 5/6 A modular type switch, connections painting etc. as reqd, for Light plug point.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 A modular type switch, connections painting etc. as reqd.

Testing & commissioning of suitable size GI box with modular plate and cover in front on surface or in recess includingTesting & commissioning of 6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 A modular type switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection as required, for Exit signage.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent /LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 1 mtr) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Wiring for the following light points with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 16 gauge MS Conduit including providing and controlled by SPMCB provided in the DB. (Cost of MCB not to be included here) complete in all repect and as per direction of Engineer In Charge.

Primary point controlled by one MCB.

Same as item above but Secondary point. i.e. Points to be looped with Primary point.

SUB HEAD - II : MCCB,MCB & DB'S

Providing and fixing following rating and breaking capacity and Four pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required (Incomer for the VTPN DBs)

100 Amp FP MCCB(16KA)

160 Amp FP MCCB(16KA)

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

200 Amp 4Pole (36 KA) with Enclosure

315 Amp 4Pole (36 KA) with Enclosure ( X-ray & CT Scan)

400 A , 4Pole (36 KA) with Enclosure (Cath Lab)

Testing and commissioning of following rating and breaking capacity and three pole MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections and supply the required spreader for connection, etc. as required (Incomer for the VTPN DBs)

100 Amp TP MCCB(16KA)

160 Amp TP MCCB(16KA)

Supplying and fixing following way,prewired SP&N,MCB distribution board of sheet steel 240 volts on on surface/ recess, complete with loose wire box ,terminal connectors for all incoming and outgoing circuits ,duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper busbars, neutral link, earth bar, dinbar, detachable gland plate , interconnections powder painted including p earthing etc. as required.(But without MCB/RCCB/Isolator)

2 + 8 way/10 way, double door

2 + 12 way/14way, double door

Connection of wires, testing & Commissioning following way,prewired SP&N,MCB distribution board of sheet steel 240 volts on on surface/ recess, complete with loose wire box ,terminal connectors for all incoming and outgoing circuits ,duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper busbars, neutral link, earth bar, dinbar, detachable gland plate , interconnections powder painted including p earthing etc. as required.(But without MCB/RCCB/Isolator) and material rate is included for complete the installation if required.

2 + 12 way/14way, double door

Supplying and fixing following way,prewired TP&N,MCB distribution board of sheet steel 415 volts on on surface/ recess, complete with loose wire box ,terminal connectors for all incoming and outgoing circuits ,duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper busbars, neutral link, earth bar, dinbar, detachable gland plate , interconnections powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)

4 way (4+12),Double door

6 way (4+18),Double door

8 way (4+24),Double door

12 way (4+36),Double door

Connection of wire, Testing & Commissioning of following way,prewired TP&N,MCB distribution board of sheet steel 415 volts on on surface/ recess, complete with loose wire box ,terminal connectors for all incoming and outgoing circuits ,duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper busbars, neutral link, earth bar, dinbar, detachable gland plate , interconnections powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator). material rate is included for completion the installation if required.

4 way (4+12),Double door

8 way (4+24),Double door

12 way (4+36),Double door

Supplying and fixing following way surface/reccessed mounting , Vertical type 415 TPN MCB distribution board of steel sheet ,dust protected ,duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs terminal connected to all incoming and outgoing circuits duly prewired with adequate size of pre- wired FRLS PVC insulated copper conductor up to terminal connector /neutral link earthing etc as required (but without MCB/RCCB/Isolator)

4 Way Double door

8 Way Double door

12 Way Double door

Connection of wire, Testing & Commissioning of following way surface/reccessed mounting , Vertical type 415 TP & N MCB distribution board of steel sheet ,dust protected ,duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs terminal connected to all incoming and outgoing circuits duly prewired with adequate size of pre- wired FRLS PVC insulated copper conductor up to terminal connector /neutral link earthing etc as required (but without MCB/RCCB/Isolator). and Material rate is included for completion the installation if required.

8 Way Double door

12 Way Double door

Supplying and Fixing of following rating double pole 240 Volts MCB in the existing MCB DB complete with connections ,testing and commissioning etc as required

Supplying and Fixing of following rating four pole 415 Volts MCB in the existing MCB DB complete with connections ,testing and commissioning etc as required

Supplying & Fixing of following rating double pole (single phase and neutral) 240 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300 milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Testing and commissioning of following rating double pole (single phase and neutral) 240 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300 milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying & fixing 5 amps to 32 amps rating 240/415 volts C curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Triple Pole

Supplying & fixing following rating 240/415 volts C curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amp Double Pole

40 Amp Triple Pole

63 Amp double Pole

63 Amp Triple Pole

Testing and commissioning of 5 amps to 63 amps rating 240/415 volts C curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Triple Pole

Supplying and fixing following rating, 240/ 415 volts, "C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps, TPN

50/ 63 Amps, TPN

Testing and commissioning of following rating, 240/ 415 volts, "C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps, TPN

50/ 63 Amps, TPN

Supply & fixing of single pole blanking plate in the existing MCB DB complete etc. as required

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required. (For geyser & A.C Outlets)

Suppling and fixing 20A 240Volts SPN industrial type socket outlet with 2 pole and earthed in metal enclosed plug top along with 20A c curve SP ,MCB ,in sheet steel enclosure on surface or in reccessed with chaned metal cover for the socket outlet and complete with connection testing and commisiong as required.

Suppling and fixing 20 amps 415 Volts TPN industrial type, socket outlet with 4 pole and earth metal enclosed plug top along with 20A C curve TP MCB ,in sheet steel enclosure, on surface or in reccessed with chaned metal cover for the socket outlet and complete with connection testing and commisiong as required.

Suppling and fixing 30 amps 415 Volts TPN industrial type, socket outlet with 4 pole and earth metal enclosed plug top along with 30A C curve TP MCB ,in sheet steel enclosure, on surface or in reccessed with chaned metal cover for the socket outlet and complete with connection testing and commisiong as required.

Providing & fixing of M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing HT danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.

Supplying & fixing 40 amps rating 240/415 volts C curve Miniature Circuit Breaker suitable for inductive loads of following SP poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SUB HEAD - III : CABLE TRAYS & CABLES

S/ F MS CABLE TRAYS

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

900 mm width X 62.5 mm depth X 2.0 mm thickness

Installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts , painting with primer and approved shaed,etc as required as per direction of EngineerIinchrge.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

900 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F MS CABLE TRAY BENDS

Supplying and installing following size of perforated pre-painted M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

900 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F MS CABLE TRAY TEE'S

Supplying and installing following size of perforated pre-painted M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

laying of one number PVC Insulated and PVC shethed /XLPE power Cables of 1.1 KV grade of following size direct in ground including excavation,sand cushioning and protecting covering and refilling the trench etc as required.

Above 95 sq mm and up to 185 sq mm.

Above 185 sq mm and up to 400 sq mm.

Laying and fixing of one no PVC insulated and PVC sheathed /XLPE power cable of 1.1 kV grade of following size on Cable tray as required.

Up to 35 sqmm. (Clambed with 1 mm thick saddle)

Above 35 sq mm and up to 95 sq mm. (Clambed with 25 x 3 mm thick MS Flat Clamp)

Above 95 sq mm and up to 185 sq mm. (Clambed with 25/40 x 3 mm thick MS Flat Clamp)

Above 185 sq mm and up to 400 sq mm. (Clambed with 25/40 x 3 mm thick MS Flat Clamp)

Dressing and fixing of existing cable one no PVC insulated and PVC sheathed /XLPE power cable of 1.1 kV grade of following size on Cable tray as required.

Above 95 sq mm and up to 185 sq mm. (Clambed with 25/40 x 3 mm thick MS Flat Clamp)

Above 185 sq mm and up to 400 sq mm. (Clambed with 25/40 x 3 mm thick MS Flat Clamp)

Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required.

3½ x 35 sq. mm

3½ x 50 sq. mm

3½ x 70 sq. mm

3½ x 95 sq. mm

3½ x 120 sq. mm

3½ x 150 sq. mm

3½ x 240 sq. mm

3½ x 300 sq. mm

4 x 10 sq. mm

4 x 16 sq. mm

4 x 25 sq. mm

Supplying & making straight throgh joint with cast resin compound including ferrulesand other jointing materials for following sizes of PVC insulated and PVC sheathed / XLPE Al. conductor cable of 1.1 KV grade as required.

3½ x 35 sq. mm

3½ x 50 sq. mm

3½ x 70 sq. mm

3½ x 95 sq. mm

3½ x 120 sq. mm

3½ x 150 sq. mm

3½ x 240 sq. mm

3½ x 300 sq. mm

4 x 16 sq. mm

4 x 25 sq. mm

Supply of following sizes of XLPE/ PVC insulated Aluminum/ Copper conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

XLPE Aluminium armoured Cables

3½ x 35 sq. mm

3½ x 50 sq. mm

3½ x 70 sq. mm

3½ x 95 sq. mm

3½ x 120 sq. mm

3½ x 150 sq. mm

3½ x 240 sq. mm

3½ x 300 sq. mm

4 x 10 sq. mm

4 x 16 sq. mm

4 x 25 sq. mm

Testing & Commissioning of XLPE insulated Aluminum conductor Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

3½ x 35 sq. mm

3½ x 50 sq. mm

3½ x 70 sq. mm

3½ x 95 sq. mm

3½ x 150 sq. mm

3½ x 240 sq. mm

3½ x 300 sq. mm

4 x 16 sq. mm

4 x 25 sq. mm

XLPE INSULATED Copper armoured. CABLES

Supply of following sizes of XLPE / Copper conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

2C x 6 Sq.mm.

2C x 4 Sq.mm.

3C x 4 Sq.mm.

4C x 4 Sq.mm.

4C x 2.5 Sq.mm.

7C x 2.5 Sq.mm.

12C x 2.5 Sq.mm.

XLPE INSULATED Copper unarmoured. CABLES

1C x 35 Sq.mm.

Supply and making End termination with brass Single/ Double compression gland including providing and crimping of aluminum/copper solderless lugs/ferrules for XLPE/PVC insulated armoured power aluminum/copper conductor cables 1.1 KV grade of following sizes complete in all repect and as per direction of Engineer In Charge:

SINGLE COMPRESSION GLAND FOR Aluminium Armoured CABLE

4C/3C x 6 sq.mm.

SINGLE COMPRESSION GLAND FOR Copper Armoured CABLE

4C/3C/2C x 6/4/2.5 sq.mm.

7C x 2.5 Sq.mm.

12C x 2.5 Sq.mm.

1C x 35 Sq.mm.(Unarmoured cable)

SUB HEAD - IV : EARTHING SYSTEM

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth Plate 600mm x 600mm x 6mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required.

Installation of G.I./ copper earth Plate 600mm x 600mm x 6mm thick, rate is including of Funnel, masonary brick work enclosure as per specification, test point with cover plate having locking arrangement Etc and as per direction of Engineer in Charge.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or I nrecess for connections etc. as required. 2 nos used for 50 x 5 for the Neutral earthing of euipments )

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (2 nos used for 50 x 5 for the Body earthing of euipments )

fixing and Dressing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (2 nos used for 50 x 5 for the Body earthing of euipments ) and Nut, Bolt & waser is included.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

FIxing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

50 mm x 6 mm thick Cu flat

32 mm x 6 mm thick Cu flat

50 mm x 6 m thick GI flat

fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

50 mm x 6 m thick GI flat

SUB HEAD - V : LIGHTING CONDUCTOR SYSTEM

ESE LIGHTNING ARRESTOR

Supply Installation, Testing & Commissioning of Non electronic External Lightning radial protection system based on proactive Early Streamer Emission (ESE) technology. Device shall emit corona in the form of a streamer into the air microseconds earlier than naturally formed streamers. Device confirmg to NFC 17-102 Standards. Apropriate mounting arrangement should be there. The device shall be mounted at least 3 meters clear to the highest point on the roof top . Radius of protection 32 mtrs.

DOWN MAST:

Supply Installation, Testing & Commissioning of Down mast of GI 40 mm dia and 3 mtr length with polymer insulator placed between lightning air terminal and down mast and base plate for mounting the terminal & adaptor to mount the Air Terminal with Coupler, Support wires, etc.

DOWN CONDUCTOR

Supply Installation, Testing & Commissioning of 1.1kV Grade, 1Corex70 sqmm, multistranded copper conductors, PVC insulated Flexible cables pecialy designed for lightning protecction system confirming to IS:694-1990 standard with suitable lugs & washers.

LIGHTNING COUNTER:-

Supply Installation, Testing & Commissioning of 6 digit lightning counter counting the number of lightning strikes without any power supply.

TEST LINK:-

Supply Installation, Testing & Commissioning of Test Link Joint Kitina IP65 weatherproof enclosure of suitable dimension.

Supply Installation, Testing & Commissioning of Advance Maintenance Free earthing environment friendly Chemical Earthing system consisting of 1no. of 3 mtr length,17.2 mm dia earth electrode made o f steel circularrods, molecularly bonded copper on outer surface (minimum copper bonding thickness 250microns ) with terminals to connect conductor with 1bag (25Kgs) of environment freindly back fill compound Make:JMV,Model: CBR1730 with DMC Pit Cover.

SUB HEAD - VI : SUPPLY & FIXING OF LIGHTING CONTROL DEVICE & LIGHT FIXTURES

Supplying,installation, testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying of following Light fixtures/ fittings with high frequency, electronic Ballast with THD<10 %, CRI greater than 80% , 100 Lumens per watt, 50,000 Hours life along with starter, control gears, lamps holder, power factor as per ECBC for LED lights for improvement, etc. as called for, exncluding chasing of walls, grouting of fitting and making good of the same , Hanging arrangement as required, complete with providing of all necessary hardwares like raw plugs, hangers, support plates etc. and flexible wires ,flexible conduits as required for fixing complet as per directions of Enginner In Charge.

Supplying of Recessed mounting 18 watt LED Down Lighter circular fixture as specified make and approved by Engineer in Charge.)

Supplying of Recessed mounting 15 watt LED Down Lighter circular fixture as specified make and approved by Engineer in Charge.)

Supplying of Recessed mounting 36 watt LED (2X2) lights fixture in square type for grid false as specified make and approved by Engineer in Charge.)

Suppying of surface mounted 14 Watt LED for mirror light, as specified make and approved by Engineer in Charge.)

Supplying of box type fl. fitting suitable for 'TL' 5 LED lamp with aluminium symmetric reflector for surface mounting, housing made of CRCA sheet steel, powder coated and suitable for 'TL' 5 28W LED lamp etc. as specified make and approved by Engineer in Charge.)

Single Box type - 28W T5 LED lamp with fitting.

Supplying of surface mounted ceiling light suitable for 18 W LED lamp duly powder coated and complete with all accesssories,etc as approved by Engineer in Charge.) as per approved by enginer in charge.

Bulk head 10 wat LED lighting fixtures with all accessories, Crompton as specified make and approved by Engineer in Charge.)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star ated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc.complete as required.

1400mm sweep 3 blade Ceiling fan complete with assembling of blades, down rod, shackle insulator, canopy etc from approved makes and complete as per direction of Engineer in Charge

Exhaust fan with louver and with 3x1.5 sqmm flexible PVC insulated copper wire of approved make and complete as per direction of Engineer in Charge

450mm 1400 RPM

300mm 1400 RPM

SUB HEAD - VII : LT PANEL & BUS DUCTS

Testing and Commissioning of MAIN LT PANEL (TTA) as described below

Testing, servicing, overhauling and Commissioning of Existing Main LT Panel front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension.

MAIN LT PANEL

INCOMER-1 FROM GENERATOR SYNC Panel

Incomer from D.G. shall consist of the following:

1600A, 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

Under voltage & Overvoltage protection

Overload, over current & Earth fault protection, Negative phase sequence protection relay , reverse power relay

The ACB shall be complete with 3 Nos. 1600A/5A, 15VA, 5P10 CTs for protection.

Metering, Indication & Push Button for Controls

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-1600A) Ammeter with ASS with 3 nos. 1600/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

INCOMER FROM TRANSFORMER-1, 1250 KVA)

Incomer shall consist of the following:

2000A 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

Under voltage & Overvoltage protection

Overload, Over current & Earth fault protection

Negative phase sequence protection,reverse power protection relay

The ACB shall be complete with 3 Nos. 2000A/5A, 15VA, 5P10 CTs for protection.

1 set of 2000/5A, 15 VA, class-1 CTs for APFC relay

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0- 2000A) Ammeter with ASS with 3 nos.2000/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

INCOMER FROM TRANSFORMER-2, 1000 KVA)

Incomer shall consist of the following:

1600A 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

Under voltage & Overvoltage protection

Overload, Over current & Earth fault protection

Negative phase sequence protection,reverse power protection relay

The ACB shall be complete with 3 Nos. 1600A/5A, 15VA, 5P10 CTs for protection.

1 set of 1600/5A, 15 VA, class-1 CTs for APFC relay

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0- 1600A) Ammeter with ASS with 3 nos.1600/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

INCOMER-2 FROM GENERATOR

Incomer shall consist of the following:

1600A 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

Under voltage & Overvoltage protection

Overload, Over current & Earth fault protection

Negative phase sequence protection

The ACB shall be complete with 3 Nos. 1600A/5A, 15VA, 5P10 CTs for protection.

1 set of 1600/5A, 15 VA, class-1 CTs for APFC relay

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0- 1600A) Ammeter with ASS with 3 nos.1600/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

BUS COUPLER:-1

1 No. 1600A FP ACB with all required accessories (as per SLD).

1 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.

BUS BARS

2 Sets of 2000A TPN Aluminum bus bars with colour coded PVC sleeves

OUTGOINGS( Short Ckt Rating in KA Rating as per above note )

1 No. 1200A TPN ACB

1 No. 800A TPN ACB

5 No. 630A TPN MCCB

1 No. 500A TPN MCCB

3 No. 400A TPN MCCB

1 No. 315A TPN MCCB

3 No. 250A TPN MCCB

2 No. 200A TPN MCCB

4 No. 160A TPN MCCB

2 No. 100A TPN MCCB

2 No. 63A TPN MCCB

(The LT Panel shall be complete with other accessories as per the SLD and specification)

SYNCHRONISING PANEL (Synchronising, Testing & Commissioning in all respect)

INCOMER-1 &2

2 nos. 1200A 415V, 4P 50kA EDO ACB with Microprocessor based release having O/L, S/C and E/F Protection with O/V, U/V protection.

2 Set of phase indicating lamps with MCB protection.

2 Set of indicating lamp to indicate OPEN, CLOSE, TRIP.

2 nos. Restricted earth fault relays.

2 nos. Triping or Trip Free relays.

2 nos. Reverse Power relays.

2 nos. Over voltage protection relays

2 nos. Under Voltage protection relays

INCOMER-3

1 nos. 1000A 415V, 4P 50kA EDO ACB with Microprocessor based release having O/L, S/C and E/F Protection with O/V, U/V protection.

1 Set of phase indicating lamps with MCB protection.

1 Set of indicating lamp to indicate OPEN, CLOSE, TRIP.

1 nos. Restricted earth fault relays.

1 nos. Triping or Trip Free relays.

1 nos. Reverse Power relays.

1 nos. Over voltage protection relays

1 nos. Under Voltage protection relays

BUSBARS:

3600A TPN busbars of copper alloy.

OUTGOING:

2 nos. 1600A 415V, 4P 50kA EDO ACB with Microprocessor based release having O/L, S/C and E/F Protection with O/V, U/V protection.

2 nos. 250A, 415V, Ics=50kA, 4P MCCB with variable O/C, S/C & E/F releases.

(The Synch. Panel shall be complete with other accessories as per the SLD and specification)

Testing and Commissioning of Capacitor Panel-1 (400 KVAR) described as below

INCOMER

800A 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

METERING & INDICATION

1 set of phase indicating lamps

1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel.

BUS-BAR

1 Set of 1000A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

2 Nos.of 250A TP MCCB with suitable AC -3 duty contactor

2 Nos.of 125A TP MCCB with suitable AC -3 duty contactor

2 Nos.of 80A TP MCCB with suitable AC -3 duty contactor

4 Nos.of 40A TP MCCB with suitable AC -3 duty contactor

2 Nos. 100 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

2 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

4 Nos. 12.5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

servicing, Overhauling, Testing and Commissioning of existing Capacitor Panel-2 (300 KVAR) as described below:

INCOMER

1 No. 600 Amps TPN MCCB (45 kA)

METERING & INDICATION

1 set of phase indicating lamps

1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel.

BUS-BAR

1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

4 Nos.of 125A TP MCCB with suitable AC -3 duty contactor

2 Nos.of 80A TP MCCB with suitable AC -3 duty contactor

4 Nos.of 40A TP MCCB with suitable AC -3 duty contactor

4 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

2 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

4 Nos. 12.5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.

Note:The capacitor panel shall also stipulate the following

(i) All the capacitors shall be suitable for 525 V

(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.

(iii) Heavy duty exhaust fans to be provided for cooling

(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading.

(v) The APFC shall be protected from following

* over-voltage & voltage unbalance

* Over temperature-system should be in standby mode and automatically restart after above condition restored.

* Total Harmonic Distortion

Testing and Commissioning of FRONT OPERATED PANEL as described below:

Front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 MVA symmetrical at 415 volts.

All switchboards shall be modular type and have provision for entry of cables from the top /bottom as required.

The cost shall include providing and fixing of 100 x 50 x 6 mm channels for switchboard support.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

All MCCB shall have phase barriers, rotary handles and extension terminal as required .

All unbalanced kWH meter shall have communication module for BMS connectivity

servicing, overhauling, Testing and Commissioning of existing MDB (Lighting & Power panel) as described below

INCOMER

2 No.630 4P MCCB

METERING & INDICATION

2 set of R,Y,B phase indicating lamps

2 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

2 No. (0-630A) Ammeter with ASS with 3 nos. 600/5A CT's

BUS-BAR

2 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

BUS-COUPLER

1 No 630A FP MCCB with Phase indication lamps

OUTGOINGS

7 Nos. 160A TNP MCCB

2 Nos. 63A TNP MCCB

4 Nos. 63A TPN MCB

6 Nos. 63A TPN MCB

Servicing, overhauling, Installation, Testing and Commisioning of existing MDB UPS INPUT PANEL - 1 as described below

INCOMER

1 No.630 A, 4P MCCB

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-630A) Ammeter with ASS with 3 nos. 600/5A CT's

BUS-BAR

1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

5 No. 160A TPN MCCB

13 No. 63A TPN MCB

Services, overhauling, Installation, Testing and Commisioning of existing MDB UPS OUTPUT PANEL - 2 as described below

INCOMER

3No. 160A 4P MCCB (25 kA)

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

BUS-BAR

1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

7 Nos. 100A TPN MCCB

3 Nos. 63A TPN MCB

Servicing, overhauling, Installation, Testing and Commisioning of existing LIFT PANEL as described below

INCOMER

1 No. 160A TPN MCCB .

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

BUS-BAR

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

5 Nos. 63A TPN MCB .

2 Nos. 40A TPN MCB .

2 No. 32A DP MCB .

Servicing, overhauling, Installation, Testing and Commisioning of existing EXTERNAL LIGHTING PANEL as described below

INCOMER

1 No. 100A 4P MCCB .

METERING & INDICATION

2set of R,Y,B phase indicating lamps

2No. (0-500V) Voltmeter with Built-in VSS with 6 nos. 2A SP MCB

2No. (0-100A) Ammeter with ASS with 6 nos. 100/5A CT's

BUS-BAR

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

6 Nos. 40A TPN MCB .

Servicing, overhauling, Installation, Testing and Commisioning of existing EXTERNAL LIGHTING FEEDER PILLAR (IP 65) as described below

INCOMER

1 Nos. 40A 4P MCB .

BUS-BAR

1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOING

2 Set each having (2 x 4 way TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 2 x 3 No. 32 amps DP RCCB of 30 mA leakage current, 2 No. 32 amps TP Contactor, push button etc. controlled through 2 No. 0-24 hour timer, photo sensor complete as required).

Bus Duct (In sandwich Construction)

Supply, forwarding to site, receiving, unloading, inspection, handling, storing, shifting to location, installation, testing and commissioning of following rating (50 KA for 1 Sec) TPN busduct in sandwich construction of aluminium bus bars with expansion joints, fire barriers including necessary supports and fabricated out of extruded aluminium/ GI sheet painted with approved paint shade as per specification including 2 No. of 50 x 6 mm copper earthing conductor through out the length of the bus duct. (Phase sequence shall be matched). Including all accessories mentioned below.

Supply and fixing of Sandwich Bus duct accessories as below but not limited to it, are deemed to be part of Bus duct above. Vendor shall plan & provide the same as per routing of Bus duct/ as approved by Client.

2000 amps TPN bus ducts from Transformer - 1 to Main LT Panel.

90deg Elbow

Flange End

Copper Flexible (Braided)

Adopter Box (Local Item)

Termination Links (Local Item)

1600 amps TPN bus ducts from Transformer - 2 to Main LT Panel.

90deg Elbow

Flange End

Copper Flexible (Braided)

Adopter Box (Local Item)

Termination Links (Local Item)

Bus Duct (In sandwich Construction)

Servicing, overhauling, Installation, Testing and Commissioning of following rating (50 KA for 1 Sec) TPN busduct in sandwich construction of aluminium bus bars with expansion joints, fire barriers including necessary supports and fabricated out of extruded aluminium/ GI sheet painted with approved paint shade as per specification including 2 No. of 50 x 6 mm copper earthing conductor through out the length of the bus duct. (Phase sequence shall be matched). Including all accessories mentioned below. Contractor shall plan & provide the routing of Bus duct/ and get approved byEingineer- In charge as per site conditions.

2000 amps TPN bus ducts from Transformer - 1 to Main LT Panel.

90deg Elbow

Flange End

Copper Flexible (Braided)

Adopter Box (Local Item)

Termination Links (Local Item)

All required balance materials, consummables, spare parts, components, of Sandwich Busduct as required is included in quoted price.Installation, Testing & Commissioning of all Busducts shall be carried out by existing OEM only as per manufacturer's Specifications and as directed by Engineer-in-charge.

1600 amps TPN bus ducts from Transformer - 2 to Main LT Panel.

90deg Elbow

Flange End

Copper Flexible (Braided)

Adopter Box (Local Item)

Termination Links (Local Item)

All required balance materials, consummables, spare parts, components, of Sandwich Busduct as required is included in quoted price.Installation, Testing & Commissioning of all Busducts shall be carried out by existing OEM only as per manufacturer's Specifications and as directed by Engineer-in-charge.

Providing, fixing ofoutdoor, weather proof GI canopy, 2mm thick for 2000Amp sandwitch bus duct complete with nuts and bolt othr accessories as required

Providing, fixing ofoutdoor, weather proof GI canopy, 2mm thick for 1600Amp sandwitch bus duct complete with nuts and bolt othr accessories as required

SUB HEAD - VIII : HT EQUIPMENT & TRANSFORMER

All the necessary arrangement for connecting and tapping HT 11 kV power existing ESS to the proposed new ESS shall be in the scope of contractor

INDOOR TYPE

Supplying, and making Indoor cable end termination with Heat shrinkable jointing kit complete with all accessories, including lugs suitable for following sizes of 3 core XLPE aluminum conductor cable of 11 KV grade as required.

3Cx240 sq.mm. XLPE insulated Al. Ar. Cable

OUTDOOR TYPE

Supplying, and making OUTDOOR cable end termination with Heat shrinkable jointing kit complete with all accessories, including lugs suitable for following sizes of 3 core XLPE aluminum conductor cable of 11 KV grade as required.

3Cx240 sq.mm. XLPE insulated Al. Ar. Cable

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required..

Above 120 sq. mm and upto 400 sq. mm

P/ F HT Danger Notice Plate

Providing and fixing MV danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.

11 KV HT SWITCHBOARD ( SINGLE PANEL) - INDOOR DUTY (TO BE LOCATED NEAR THE MAIN ENTRANCE)

Servicing, overhauling, Installation, testing and commissioning of existing single enclosed 2 mm thick sheet steel clad floor mounting, vermin proof, fully interlocked vertical isolation, extensible, horizontal draw out, air insulated, metal clad switchboard having double isolation features complete with circuits as detailed below. The switchboard shall be complete with necessary PVC insulated copper busbars, small wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 kV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA at 11 kV Panel shall be equipped with following accessories and as per specifications and schematic drawing. Servicing & complete overhauling of 11 KV HT Switchboard shall be carried out by contractor through Original Equipment Manufacturer (OEM) or their authorised Channel Partner/ Service Integrator only. Replacement of measuring instrument, protection instruments / Relays, indication lamps and other accessories, if required shall be carried out by contractor to make the 11 KV switchboard functional in all respect.

1No. - Metal Clad housing with having 630A Vaccum circuit breaker with Electric operated mechanism (spring charged motor - 230V AC)

1Set- Tripping coil & closing Coil 24V DC

1 - Set of isolating plug and receptacle

1 - Set of Automatic safety shutter

1- Set of breaker control switch (TNC)

1 -Set of dual core CT's as follows:

Core I - 75-120/5A class 5P-10 (15 VA)

Core II - 75-120/5A class -1 (15 VA)

1set of 11/ 3KV / 110/ 3 Volt, 50 VA burden & accuracy class 1, 3 nos. single phase construction, dry type cast resin PT

1 - Set of ON/OFF/Trip/ Spring Charged & Trip circuit healthy and phase indicating lamps.

1 No.- H.T. Cable joint box for 3C x 240 Sq.mm aluminium conductor XLPE cable,11 KV(E)

1- set of IDMT relay with 2 element of O/C protection(50%-200%) & 1 element of E/F protection (20%-80%).

1 no. U/V & O/V relay

1 no. Anti Pumping Relay

1 no. Trip Circuit supervision relay.

1 no. Master Trip relay.

1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete as required.

Installation,Testing & Commissioning Rate for 11 kV HT Panel as described above

11 KV HT SWITCHBOARD ( THREE PANEL) - INDOOR DUTY

Servicing, Overhauling, Installation, testing and commissioning of a THREE panel ( one incomer +two outgoing) indoor duty totally enclosed sheet steel clad floor mounting, vermin proof, fully interlocked vertical isolation, extensible, horizontal draw out, air insulated, metal clad switchboard having double isolation features complete with circuits as detailed below. The switchboard would be complete with necessary PVC insulated copper busbars, small wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 kV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA .This HT panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. . Servicing & complete overhauling of 11 KV HT Switchboard shall be carried out by contractor through Original Equipment Manufacturer (OEM) or their authorised Channel Partner/ Service Integrator only. Replacement of measuring instrument, protection instruments / Relays, indication lamps and other accessories, if required shall be carried out by contractor to make the 11 KV switchboard functional in all respect.

All Incoming and outgoing feeders shall have fault trip auxiliiary contacts for wiring to annunciation fault trip indication panel

One Incoming panel equipped with :

1- Air insulated metal clad housing

1- set of 3 phase PVC insulated copper busbars 630 amps rating

6- single pole cluster type isolating contacts i.e. plug and switches

1- Triple pole draw out truck mounted 11kV 350 MVA, 630 amps Vacuum circuit breaker fitted with arc control devices.

6 NO/NC contacts for remote ON/OFF/TRIP status at BMS

1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches, emergency hand trip device and mechanical 'OFF' & 'ON' indicator.

1 - 24 Volt DC shunt trip coil

3 - Dual Core Cast resin Current transformers of ratio 75-120/5A Class 5P10 and Class 1.0, 15 VA burden for protection & metering.

1- 3 Phase cast resin horizontal draw out line potential transformer ratio 11 KV/√3:110/√3 Volt, class 1.0, 200 VA connected star/star with H.V. and L.V. connections, H.V.fuses and LV MPCB of adequate rating to withstand fault level in PT circuit, isolating plugs for H.V. and L.V. connection.

1- Strip heater to prevent absorption of moisture

The instrument and relay panel fitted with :

1 no. energy analyser to measure voltage, current, power factor, frequency,kW/kVA, kWh, kVArh, kVAh,Real time,date with communication module.

1 - no. circuit breaker control switch for electrical (T/N/C)

1- Triple pole numerical I.D.M.T. overcurrent & earth fault relay with two outer elements connected for overcurrent protection and the middle element for earth fault protection overcurrent setting 50% - 200% Earth fault setting 20% - 80% (51 and 51N)

1 - Electro mechanical Master trip relay (86)

1 - Electro mechanical Anti pumping relay (94)

1 - Trip Circuit supervision relay.

1- set of Red/Green indicating lamps for close and open position

1- Amber indicating lamp for auto trip

1- clear indicating lamp for trip circuit healthy

1- set of white indicating lamps one per phase

1 - blue indicating lamp for spring charged

1 - push button on front door for emergency trip

1- Four window annunciation display to indicate fault trip of incoming and outgoing feeders including audio alarm hooter with accept push button, internal wiring,protection fuses etc. complete.

1- cable box suitable for cable termination to receive 11 KV XLPE Cable 3 Core 240 sqmm.

1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete & suitable as required for th complete item.

TWO NOS OUTGOINGS TRANSFORMER FEEDERS EACH EQUIPPED WITH:

1- Air insulated metal clad housing

1- set of 3 phase PVC insulated copper busbars 630 amps

6- Single pole cluster type isolating contacts; i.e. plug and switches

1- Triple pole drawout truck mounted 11 kV 350 MVA, 630 amps Vacuum circuit breaker fitted with arc control devices.

1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches emergency hand trip device and mechanical 'OFF' and 'ON' indicator.

6 NO/NC contacts for remote ON/OFF/TRIP status at BMS

1 - 24 volts DC shunt trip coil

3 - Dual Core Cast resin Current transformers of ratio 40/5 Class 5P10 and Class 1.0, 15 VA burden for protection & metering.

1- Strip heater to prevent absorption of moisture

The instrument and relay panel fitted with

1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two outer elements connected for over current and the middle element for earth fault protection over current setting 50% - 200% Earth fault setting 20% -80% and with instantaneous element on all 3 pole settings 500-2000% on over current and 200-800% on earth fault (51, 50, 51N & 50N)

1 - Electro mechanical Master trip relay (86)

1 - Electro mechanical Anti pumping relay (94)

1 - Trip Circuit supervision relay.

1 - set of electro mechanical auxiliary relay for OLTC

1- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperature conditions (63x)

1- set Electro mechanical auxiliary relay for transformer fault TRIP for winding temperature conditions (63x)

1 - no. circuit breaker control switch for electrical (T/N/C)

1- set of Red/Green indicating lamps for close and open position

1- Amber indicating lamp for auto trip

1- clear indicating lamp for trip circuit healthy

1- set of white indicating lamps one per phase

1 - blue indicating lamp for spring charged

1- cable termination suitable for cable joint to receive 11 KV XLPE cable 3 core 240 sqmm .

The switchboard shall be complete with all interconnections, label wiring, etc as required and as per direction

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.

Installation, Testing and Commissioning of 1250 kVA 11000/433 volts Deta/Star, vector group DYN11, outdoor mounting, oil cooled, ONAN transformer with ON Load Tap Changer (OLTC) plus AVR ,AVS relay and RTCC for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of On Load Tap changer, suitable for incoming voltage variation of –15% to +5% in 17 steps in 1.25% to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection and space for mounting differential protection CT's in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect XLPE Cable on LT side, complete as required.

All required materials, consummables, spare parts, components, supply of Oil etc. as required is included in quoted price except supply of Transformer. Installation, Testing & Commissioning of all Transformers shall be carried out by OEM i.e. Voltamp only as per manufacturer's Specifications and as directed by Engineer-in-charge.

Installation, testing and commissioning of 1000 kVA 11000/433 volts Deta/Star, vector group DYN11, outdoor mounting, oil cooled, ONAN transformer with ON Load Tap Changer (OLTC) plus AVR ,AVS relay and RTCC for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of On Load Tap changer, suitable for incoming voltage variation of –15% to +5% in 17 steps in 1.25% to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection and space for mounting differential protection CT's in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect XLPE Cable on LT side, complete as required.

All required materials, consummables, spare parts, components, supply of Oil etc. as required is included in quoted price except supply of Transformer. Installation, Testing & Commissioning of all Transformers shall be carried out by OEM i.e. Voltamp only as per manufacturer's Specifications and as directed by Engineer-in-charge.

Supplying OF following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per technical specifications

3C x 240 sq.mm. XLPE insulated Al. Ar. Cable

P/ F HT Danger Notice Plate

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Supply and fixing position the approved single line diagram framed in 1000 x 800 mm size glass frame and installed in main switch room.

Supply of First Aid box of approved make as per specification.

Supply of tool kit with 1 pair 11 KV rubber hand gloves of approved make.

SUB HEAD :- IX :- SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF DG SET INCLUDING ALL ACCESSORIES

DG SETS

Erection, testing & commissioning of following rating of DG Sets in Accoustic Enclosure, having self excited & self regulated 415 V, 3 Phase, 4-Wire, 50 Hz, 0.8 p.f. Alternator coupled with multi-cylinder, turbo-charged/ turbo-charged after cooled as called for, Diesel Engine capable to generate the power not less than the required BHP to achieve the alternator capacity as given below, with Air-cooled radiator, hospital type silencers and Electronic governer suitable PCC (Power Command Control) or equivalent for Synchronised Operation including providing of AMF relay, Circuit Breaker as c called for, & Engine control panel, 24V batteries of suitable rating, battery ( Batteries shall be replaced within the quoted cost) with battery leads,inbuilt oil fuel tank and complete with all standard accessories & protection as required and as per specifications, including first filling of lube oil providing common base plate, anti vibration pads, drip trays, foundation bolts, nuts, bolts, cable termination/adopter box sutiable to terminate upto 3 nos. of 3.5Cx300 sq.mm. XLPE cables as required for a complete installation including initial filling of fuel and lubricants required during trial run of DG sets on full load for 12 hours followed by 10% overload for one hour in any 12 hours duration, as per specifications & drawings complete with RCC/PCC foundation for DG set as per the structural detail for Dynamic Load submitted by the Vendor and approve by the Consultant.

All required materials, consummables, spare parts, components etc. as required is included in quoted price except supply of DG Sets. Installation, Testing & Commissioning of all DG Sets shall be carried out by OEM i.e. CSH only as per manufacturer's Specifications and as directed by Engineer-in-charge.

750 KVA (With Acoustic Enclosure)

600 KVA (With Acoustic Enclosure)

EXHAUST PIPE & CHIMNEY

EXHAUST PIPE

Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe with all fixing accessories and hardwares. The exhaust pipes shall be dual insulated with first layer of 25 mm thick ceramic fibre wool insulation (128 Kg/ cubic metre density) and second layer of 50 mm thick mineral wool (150 Kg/ cubic metre density) insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet including all support as required. (Exhaust support structure Steel qty has been taken in Civil BOQ)

250 mm dia

Supply,Installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe with all fixing accessories and hardwares. The exhaust pipes shall be dual insulated with first layer of 25 mm thick ceramic fibre wool insulation (128 Kg/ cubic metre density) and second layer of 50 mm thick mineral wool (150 Kg/ cubic metre density) insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet including all support as required (Except supply of MS Pipe). (Exhaust support structure Steel qty has been taken in Civil BOQ)

250 mm dia

SAFETY MATS

Providing a mat made of elastomeric polymers Material(Class B)1 mtr. wide and 2.5 mm thick to withstand 11 KV dielectric strength AS PER IS 15652 : 2006

Providing a mat made of elastomeric polymers Material (Class C)1 mtr. wide and 03 mm thick to withstand 33 KV dielectric strength AS PER IS 15652 : 2006

Providing and fixing of Water Cooler having Cooling and Heating facility both for water with RO water from approved by EIC with minimum tank capacity of 25 ltrs having water purification rate @ 25 ltr per hour. The service provider shall provede 2 years free maintenance inclusive filter ,memberane etc . Filter shall be changed at the interval of 6 months regularly comlete in all respect as per Engineer in Charge.

SUB HEAD - X : UPS SYSTEM

Installation, Testing and commissioning of the following rating UPS as per specifications and complete in all respects.

Servicing, overhauling, Installation, Testing and commissioning & co-ordination with existing material supply vendor for required accessories of the following rating UPS as per specifications and complete in all respects.

Suppy, Installation, Testing & Commissioning of suitable 160 Amp hour batteries for 100 KVA UPS as per above mentioned Item suitable for 30Min backup complete with connecting copper cables switch gear etc. complete in all respect and as per direction of Engineer Incharge.

SUB HEAD - XI: FIRE SEPRESSION SYSTEM

NOVEC 1230 GAS OR EQUIVALENT FLOODING SYSTEM

Gas Bassed Fire Suppression system for Electrical panel

Design, supply, Installation, Testing & Commissioning of Novec 1230 gas or equivalent based fire suppression system comprising of the following:

For Electrical Panel

Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230 System or equivalent for Electrical Panels(Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components below:

2kg capacity Novec 1230 or equivalent , DLP Assembly with automatic valve, push in connector for tube, Novec 1230 or equivalent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

4kg capacity Novec 1230 or equivalent, DLP Assembly with automatic valve, push in connector for tube, Novec 1230 or equivalent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

Linear pneumatic heat Detection Tube with all necessary fittings & supports.

A/V alarm as per standard of manufacturer or as approved by EIC

Master Control Unit for controlling each system complete with pressure switches buzzzers including all necessary accessories & electrical wire harness to make entire system functional complete in all respect and as per direction of Engineer In Charge.

SUB HEAD - XII: EXTERNAL STREET LIGHTS AND SOLAR POWER PANELS ON GRID SYSTEM

Supply and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with G.I thimble etc. as required.

STREET LIGHT POLES

Supplying, Installation, Testing and commissioning of 6.0 meter high G.I octagonal pole (Above Ground Level) with single arm of suitable length with inbuilt junction box with 10A SP MCB, connectors for incoming/ outgoing cable connection and 300mm x 300 mm x 20 mm thick base plate complete in all respect including CC foundation minimum size 350mm x350mmx500mm with provision of PVC pipe for UG cable entry & termination of cable with gland/ thimble including 4 Nos. heavy duty foundation nut bolts with suitable length complete as required including erection of G.I. pole in 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) including excavation & refilling etc as required below ground complete as per requirement with all accessories.

Supply, installation, testing & commissioning of LED 60 W Street Light Single Piece Pressure Die Cast Aluminium Housing, Top maintenance: Access to driver should be from the top without opening LED compartment, Minimum 3600 lumens , with non‐yellowing modular secondary lens optics, ensuring IP66 & IK >05 protection, LED Used shall be SMD type and fixture should have minimum efficacy at 110 Lumens/Watt, Life of System should be 50000 hrs @L70 along with inbuilt Driver, CCT - 5700K/6500K (CCT tolerance allowed as per ANSI), CRI > 70, PF >=0.9, THD<10%, The fixture should comply with the parameters as per IS10322 . Built in Surge Protection of 4kV, Operating Voltage range:- 150-270 V AC, operating temperature from -5 to +45 degree celcius.

40 W LED All-in-One Solar Street Light with 6 M Pole (Above ground) Supply of All-In-One Solar LED Street Light along with 6 mtr Octagonal Pole having a system wattage of 36 W with in-built charge controller, with health monitoring system, over charging protection enabled with Bluetooth technology, LED Life Span : > 50,000 hrs, System Efficacy >= 100 Lumens/Watt, Operating Voltage 12 V DC to 13V DC, Solar MONO Crystalline Panels: 40 Wp Size 1120 X 305 X 140 mm, Battery - LiFePO4 (Lithium Ferro Phosphate), Per fixture Minimum 12.8V,27 Ah, Duty Cycle-12 hours/day, Autonomy 2 days, Ingress Protection IP65 with necessary accessories, The solar system should be mounted on a 6.0 Mtrs Octagonal Pole above ground. Temperature 6000-6500K.

Supply, fixing, testing & commissioning of the Gate Lighting Fixture equivalent to Philips cat no. Metronomois CDS 570 including 1 no. 150 watt CDM-T MH lamp along with ignitor, necessary brackets, including connections ,required wiring ,conduit , as required.

Supply, fixing, testing & commissioning of the bollard Lighting Fixture equivalent to Philips Cat. No. BCP 150 Bollard including 1 no. 9 watt LED lamp of approved shade along with ignitor, necessary brackets, including connections,wiring,conduit ,civil works as required and complete in all respect as per direction of engineer in charge.

Supply, fixing, testing & commissioning of the Flood Lighting Fixture 1 no. 250 watt LED lamp along with necessary brackets, including connections ,required wiring ,conduit , as required.

Supplying & installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block. Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring.

Supply, laying, testing and commissioning of following size XLPE insulated copper conductor 1100 V grade armored cable including excavation sand filling providing brick protection, back filling of earth, watering, ramming and consolidating of earth, complete:

a. 4 C x 4 Sq. mm

b. 4C x 6 sq.mm

Making end termination of following size PVC insulated copper conductor 1100 V grade armored cable including cost of crimping lugs, insulation tapes, double compression glands etc. complete.

a. 4 C x 4 Sq. mm

b. 4C x 6 sq.mm

Wiring with 2 x 2.5 sq. mm. PVC insulated copper conductor 1100 V grade wires in existing pole including connecting at the lighting fixtures complete.

Wiring with 2 x 2.5 sq. mm. PVC insulated copper conductor 1100 V grade wires in 16 gauge 25 mm dia GI conduit including connecting at the lighting fixtures complete. The cost shall include supply and installation of conduit pipe, chasing of wall and making good.

Fabricating supplying to site, installation in ceiling/floor , 2.0 mm thick M.S. Powder coated raceways of height 40 mm and 2 mm thick openable cover, totally enclosed, seam welded. Two lengths of channel / channel and junction box shall be seam welded together to make it dust and water proof.

450mm wide 40mm depth

300mm wide 40mm depth

Supply & fixing of following sizes of steel conduit along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm dia.

25 mm dia.

Supply & fixing of following sizes of GI Flexible pipe along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia.

HVAC HIGH SIDE

AIR COOLED CHILLING UNIT

Chiller

Chilled water inlet : 54o F

Chilled water outlet : 44o F

Chilled water flow rate: 384 USGPM

Fouling Factor : 0.0005 (FPS)

(1 No. Standby Chiller included in above quantity)

(The cost of BMS compatible card shall be included in each chiller)

Chilling machine COP at shall be min 3.05 and IPLV of min. 3.32 & and all performance requirements are at ARI 550/590 -1998 Test conditions. (Two working+one standby)

Ambient Temperature: 108 degree fahrenheit

Installation, Testing & Commissioning of above said work.

PUMPS

Chilled water pumps

Water flow rate : 384 USGPM

Head : 100 ft

(1 No. standby pump included in above quantity) (2W+1S)

Installation, Testing & Commissioning of above said work.

Hot water pumps for OTs (Monoblock)

Water flow rate : 35 USGPM

Head : 90 ft

(1 No. standby pump included in above quantity) (2W+1S)

Installation, Testing & Commissioning of above said work.

Variable Speed Pumping System for chilled water Pumps

Comprehnsive services, overhauling and Installation, testing and commissioning through OEM / Authorised channel partner in all respective material of Variable Speed Pumping system consisting of adjustable frequency drive (AFD) - Numbers of AFD & HP given below, suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 04 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals, BMS compatible etc complete with other accessories as required. All required materials, consummables, enclosure, spare parts, components, as required is included in quoted price

For 3 Nos. OF CHILLED WATER Pump Motor (2W+1S)

HOT WATER GENERATOR

Comprehnsive services, overhauling and Installation, testing and commissioning through OEM / Authorised channel partner of electrical Hot water Generator equipped with sufficient no.of flanges and electric immersion heaters.The pressure Vessel shall be constructed as per ASME standards and insulated on all sides with 2 layers of 50 mm thick fiberglass with 28 guage Aluminium cladding as per specifications. The hot water generator shall be equipped with all automatic and safety controls such as manual reset, high temperature water outlet,step controller and recycling relay,on/off switch type thermostat,pilot light, low water cut off and other controls as per manufacturers recommendations.All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The hot water generator shall be suitable for 415±10%volts/50 cycles,3phase power supply The entire hot water generator shall be factory assembled and tested requiring only connection to services of 50 KW capacity & shall be BMS compatible & & Antivibration arrangement of cushy foot mountings etc. It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge. in all respect shall be in contractor's scope. All required materials, consummables, spare parts, components, as required is included in quoted price

Capacity : 50 KW

Water temp in at 1120 F & temp. out at 1220 F with flow rate of 50 USGPM.

HOT WATER GENERATOR (FOR OTs)

Comprehnsive services, overhauling and Installation, testing and commissioning through OEM / Authorised channel partner of electrical Hot water Generator equipped with sufficient no.of flanges and electric immersion heaters.The pressure Vessel shall be constructed as per ASME standards and insulated on all sides with 2 layers of 50 mm thick fiberglass with 28 guage Aluminium cladding as per specifications. The hot water generator shall be equipped with all automatic and safety controls such as manual reset, high temperature water outlet,step controller and recycling relay,on/off switch type thermostat,pilot light, low water cut off and other controls as per manufacturers recommendations.All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The hot water generator shall be suitable for 415±10%volts/50 cycles,3phase power supply The entire hot water generator shall be factory assembled and tested requiring only connection to services of 35 KW capacity & shall be BMS compatible. It should be complete in all respect as per manufacturer's specifications & as directed by Engineer-in-charge. All required materials, consummables, spare parts, components, as required is included in quoted price

Capacity : 35 KW (For OT's)

Water temp in at 1120 F & temp. out at 1220 F with flow rate of 35 USGPM.

(1 No. standby HWG included in above quantities)

COMBINED AIR & DIRT SEPARATORS

Supply, Installation, Testing & Commissioning of combined Air and Dirt Separators as per the Specifications on the return water line located at the pump suction or a suitable location as suggested and suitable for (768) USGPM CHW water flow respectively. The Separator should be capable of removing all microbubbles and should have a steel tube & copper wire media to carry out its operation. The separator should be complete with high capacity air vent, service valve,Drain Valve etc. The Minimum Free area of the Air Vent on top should be 100mm. Necessary civil work required for the above equipment shall be included in this item quoted price.

HVAC WORKS (LOW SIDE)

(CHILLED WATER / DRAIN)

INSULATED CHILLED WATER PIPING (EXPANDED POLYSTRENE)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. For Cooling System pipework: R value should be min. 0.35 sqmK/W below 15 degree celcius For Heating System piepwork: R value should be min. 0.74 sqmK/W for 60 degree celcius & above & min. 0.35 sqmK/W for temp. between 40 to 60 degree celcius.

200 mm dia MS Pipes (75mm Insulation)

150 mm dia MS Pipes (75mm Insulation)

125 mm dia MS Pipes (50mm Insulation)

100 mm dia MS Pipes (50mm Insulation)

80 mm dia MS Pipes (50mm Insulation)

65 mm dia MS Pipes (50mm Insulation)

50 mm dia MS Pipes (50mm Insulation)

40 mm dia MS Pipes (50mm Insulation)

32 mm dia MS Pipes (50mm Insulation)

25 mm dia MS Pipes (50mm Insulation)

Supply & Fixing of aluminium cladding with wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding in existing pipe and testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. and installation Material is included of polystrene moulded pipe section is reqired For Cooling System pipework: R value should be min. 0.35 sqmK/W below 15 degree celcius For Heating System piepwork: R value should be min. 0.74 sqmK/W for 60 degree celcius & above & min. 0.35 sqmK/W for temp. between 40 to 60 degree celcius.

200 mm dia MS Pipes (75mm Insulation)

150 mm dia MS Pipes (75mm Insulation)

125 mm dia MS Pipes (50mm Insulation)

100 mm dia MS Pipes (50mm Insulation)

80 mm dia MS Pipes (50mm Insulation)

65 mm dia MS Pipes (50mm Insulation)

50 mm dia MS Pipes (50mm Insulation)

40 mm dia MS Pipes (50mm Insulation)

32 mm dia MS Pipes (50mm Insulation)

25 mm dia MS Pipes (50mm Insulation)

Supply of insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m for Cooling System pipework: R value should be min. 0.35 sqmK/W below 15 degree celcius For Heating System piepwork: R value should be min. 0.74 sqmK/W for 60 degree celcius & above & min. 0.35 sqmK/W for temp. between 40 to 60 degree celcius.

FOR 200 mm dia MS Pipes (75mm Insulation)

FOR 150 mm dia MS Pipes (75mm Insulation)

FOR 125 mm dia MS Pipes (50mm Insulation)

FOR 100 mm dia MS Pipes (50mm Insulation)

FOR 80 mm dia MS Pipes (50mm Insulation)

FOR 65 mm dia MS Pipes (50mm Insulation)

FOR 50 mm dia MS Pipes (50mm Insulation)

FOR 40 mm dia MS Pipes (50mm Insulation)

FOR 32 mm dia MS Pipes (50mm Insulation)

FOR 25 mm dia MS Pipes (50mm Insulation)

INUSLATED VALVE

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications

SITC of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified

200 mm dia

150 mm dia

125 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

Installation, Testing & Commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating, with flanged for chilled water/hot water circulation & Insulated to the same. Work should be as specified. (Material rate is include in quoted price except butterfly valve for complete installation, testing & commissioning)

200 mm dia

150 mm dia

125 mm dia

80 mm dia

50 mm dia

40 mm dia

SITC of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.

150 mm dia

125 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

Installation, Testing & Commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified and required accessories. (Material rate is include in quoted price except balancing valve for complete installation, testing & commissioning)

150 mm dia

125 mm dia

80 mm dia

50 mm dia

SITC of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.

150 mm dia

65 mm dia

50 mm dia

Installation, Testing & Commissioning of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified and required accessories. (Material rate is include in quoted price except NON RETURN VALVE for complete installation, testing & commissioning)

150 mm dia

50 mm dia

SITC OF Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.

150 mm dia

125 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

Installation, Testing & Commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified and required accessories. (Material rate is include in quoted price except butterfly valve for complete installation, testing & commissioning)

150 mm dia

80 mm dia

50 mm dia

40 mm dia

Providing and fixing in position the industrial type pressure gauges with gun metal/brass valves complete as required

Providing & fixing in position the mercury in glass industrial type thermometer complete as required

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

SUPPLY / RETURN AIR DIFFUSERS

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

SUPPLY / RETURN AIR GRILLES

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

FIRE DAMPERS

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

Fire damper

Actuator

INSULATION

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class“O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

19 mm thick (In Condition Space)

25 mm thick (In Non - Condition Space)

Supplying, fixing accoustic lining on wall amd ceiling of AHU rooms with 50 mm thick, density 32 kg/cum resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25 x 50 x 50 x 50 x 25 mm made out of 0.6 mm thick GI sheet U shaped channel and covered with reinforced fiber galss tissue and finished with 0.8 mm perfoarted aluminium sheet etc. complete as required and as per sepcifications.

TREATED FRESH AIR HANDLING UNITES WITH HEAT RECOVERY WHEEL FOR OT AREAS (AHU+HRW+Pre,Fine,HEPA filetrs etc.)

Supply,installation testing and commissioning of factory fabricated Double skinned 100 % Fresh air Chilled Water Floor mounted horizontal type Air Handling unit made out of 25 mm thick panels with Heat Recovery Wheel section with Thermal break profile & mixing chambers , 0.8 mm pre-plasticized/precoated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with 40 mm thick PUF insulation with density not less than 38 kg/Cum between them and Blower section .Blower shall be DIDW backward Curved blade (Plug fan/belt driven) on supply side and DIDW forward curved blade on exhaust side .AHU shall be complete with Squirrel cage induction motor, cooling coil (Copper tubes and Aluminium fins 12-13 fin./inch),Heating coil, pre-filter (Washable Synthetic fibre of efficiency 90% down to 10 micron) ON SUPPLY & EXHAUST, fine filter section with filters of non woven synthetic media of 5 micron particle size in supply, Filter frame Flange type, drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 10 mm think closed cell polyurethene foam (PUF) insulation), V belt drive, fireproof double canvass connection and other accessories as per specifications (except water shut off valves, drain piping and pressure gauges which are covered under separate item). Motor shall be TEFC type of EFf-1 class & suitable for 415 ± 10% volts, 50 cycle, 3 Phase AC supply as indicated below. Hepa filter section with non woven synthetic media of 0.3 micron particle size with an efficiency of 99.99% after fan on supply air side . HRW efficiency shall not be less than 78 % ( equal efficiency both Sensible & Latent ), the Desiccant should be Molecular Sieve 3 Angstorm.The HRW sections shall comprise of inlet & outlet discharge with VCD, Sound level 75 db at the distance of 2 mtr.(maximum), BMS compatible etc. complete as per specifications and of following capacites.AHU shall include the cost of HEPA filter. PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings etc. complete in all respect shall be in contractor's scope for floor mounted AHUs.

4000 CFM Supply Air Blower @ 125 mm S.P & 4000 CFM Exhaust/Return air Blower @ 50 mm S.P ( 19 TR , 6 + 2 Rows deep ) - OT 1 & OT 5 (Fan motor of Reqd. H.P rating )

4000 CFM Supply Air Blower @ 125 mm S.P & 4000CFM Exhaust/Return air Blower @ 50 mm S.P ( 17 TR , 6 + 2 Rows deep ) - OT 6 (reqd. HP rating fan motor)

AIR HANDLING UNITES FOR OT AREAS

Airconditioned Space

AIR HANDLING UNITS FOR ICUs

Airconditioned Space

First & Fifth Floor

ICCU/ICU

ICCU/ICU

ICCU/ICU

AIR HANDLING UNITS FOR OTHER AREAS

Airconditioned Space

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

Offices/General Area

FAN COILS UNITS (CEILING SUSPENDED TYPE)

1200 CFM (3.0 TR)

1000 CFM (2.5 TR)

800 CFM (2.0 TR)

600 CFM (1.5 TR)

1000 CFM (2.5 TR)

800 CFM (2.0 TR)

600 CFM (1.5 TR)

400 CFM (1.0 TR)

SPLIT UNITS (FOR CONSULTANT & EXAMINATION ROOM) - 3 STAR RATING (Hot & Cool Type)

Supply, Installation, testing and commissioning of Hot & Cool type Aircooled split air conditioners each comprising an outdoor unit(s) consisting compressor, air cooled condenser, condenser fan along with Cooling thermostats etc. with outer casing and indoor fan coil unit consisting of centrifugal fans, fan motor, DX cooling/Heating coil, outer casing, filter, control and power panel with remote etc. entire cabling and wiring from indoor to outdoor, insulation and with full charge of refrigerant gas and oil, supports, canvas connection etc. complete as per drawings. The indoor and outdoor units shall be with structural steel supports, angles, rods etc. The quoted price shall also include copper refrigerant piping from outdoor unit to indoor unit complete with insulation, refrigerant charging, drain piping, supports, clamps, fittings, connections, sleeves, supports, MCB, stabilizer etc from main panel to the unit. The refrigerant used shall be ozone friendly HFC.

HI WALL UNIT - 1.5 TR

Installation, testing and commissioning of Hot & Cool type Aircooled split air conditioners each comprising an outdoor unit(s) consisting compressor, air cooled condenser, condenser fan along with Cooling thermostats etc. with outer casing and indoor fan coil unit consisting of centrifugal fans, fan motor, DX cooling/Heating coil, outer casing, filter, control and power panel with remote etc. entire cabling and wiring from indoor to outdoor, insulation and with full charge of refrigerant gas and oil, supports, canvas connection etc. complete as per drawings. The indoor and outdoor units shall be with structural steel supports, angles, rods etc. The quoted price shall also include copper refrigerant piping from outdoor unit to indoor unit complete with insulation, refrigerant charging, drain piping, supports, clamps, fittings, connections, sleeves, supports, MCB, stabilizer etc from main panel to the unit. The refrigerant used shall be ozone friendly HFC. All required materials, consummables, spare parts, components as required is included in quoted price except supply of Indoor Units, Outdoor Units and Voltage stabilizer. Installation, Testing & Commissioning of all Split ac's shall be carried out only as per manufacturer's Specifications and as directed by Engineer-in-charge.

HI WALL UNIT - 1.5 TR

UVGI SYSTEM

Supply, Installation , testing , commissioning and handing over of the duct mounted Ultra Violet Germicidal Irradiations (UVGI) System for maintaining indoor Air Quality in AHU unit. The lamp shall have 9000 hrs life, ballasts shall be electronic type, life rated grater than 15000 starts. An hour meter shall be provided in the remotely mounted electrical box to indicate Lamp change and should be designed to achive kill rate of not less than 90% per pass. The components of the system must be in strict conformity with the specifications. The prices to include all inter connected wiring between the UVGI Lamps. Proper supporting system of UVGI to be provided & will be in contractor's scope.

Septic OT s - 3000 CFM

Septic OT s - 2700 CFM

EXPANSION TANK

Providing and installation, testing and commissioning of expansion tank, fabricated out of 6 mm thick M.S. plate construction, duly insulated with 50 mm thick expanded polystyrene (TF Quality) overed with vapour barrier, 0.5mmx20mGI wire mesh netting & finished with 0.5mm thick GI cladding as per the specifications and shall be complete with 50mm dia outlets for system connection and overflow, make up connection, overflow connection, drain connection, drain valve, vent connections, valves and fittings as required. Expansion tank shall be complete with insulation as per specifications. Necessary civil work required for the above equipment shall be included in this item quoted price.

SIZE : 1000 mm X 1000 mm X 1000 mm (high)

CHILLED WATER PIPING (WITH EPS INSULATION)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. For Cooling System pipework: R value should be min. 0.35 sqmK/W below 15 degree celcius For Heating System piepwork: R value should be min. 0.74 sqmK/W for 60 degree celcius & above & min. 0.35 sqmK/W for temp. between 40 to 60 degree celcius.

20 mm dia MS Pipes (50mm Insulation)

Laying/ Fixing, Testing and Commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. (Excluding supply of MS pipe) For Cooling System pipework: R value should be min. 0.35 sqmK/W below 15 degree celcius For Heating System piepwork: R value should be min. 0.74 sqmK/W for 60 degree celcius & above & min. 0.35 sqmK/W for temp. between 40 to 60 degree celcius.

20 mm dia MS Pipes (50mm Insulation)

PICB VALVE (PRESSURE INDEPENDENT CONTROL & BALANCING VALVE)

Supply,Installation Testing and Commissioning of PICB Valves (PN-16 rated) with electronic,modulating, 3- way control device.The Valve should have self Dynamic Flow Control Valves that are pressure independent, Modulating to accept digital/analog input BMS/Controller signals and should provide position feedback signal to the control system. Valve Actuator housing shall be rated to IP54. Valve shall be of Brass/Bronze Construction upto DN50 and Cast Iron upto DN150.

120-90 USGPM (For AHUs)

85-60 USGPM (For AHUs)

32-17 USGPM (For AHUs)

16-09 USGPM (For AHUs)

8.0 - 6.0 USGPM (For AHUs)

8.0 - 6.0 USGPM (For FCU)

5 - 2.5 USGPM (For FCU)

Installation Testing and Commissioning of PICB Valves (PN-16 rated) with electronic,modulating, 3- way control device.The Valve should have self Dynamic Flow Control Valves that are pressure independent, Modulating to accept digital/analog input BMS/Controller signals and should provide position feedback signal to the control system. Valve Actuator housing shall be rated to IP54. Valve shall be of Brass/Bronze Construction upto DN50 and Cast Iron upto DN150. (All required materials, consummables, spare parts, components etc., as required is included in quoted price except supply of PICB valve.)

120-90 USGPM (For AHUs)

85-60 USGPM (For AHUs)

32-17 USGPM (For AHUs)

16-09 USGPM (For AHUs)

8.0 - 6.0 USGPM (For AHUs)

Supply,Installation,Testing and Commissioning of following Motorised Butterfly Valve, BMS compatible with actuator/linkage/accessories etc. (2 -way on/off type with status feedback) as per the manufacturer's specifications & as directed by Engineer-in-charge.

200 mm dia

150 mm dia

50 mm dia

Installation,Testing and Commissioning of following Motorised Butterfly Valve, BMS compatible with actuator/linkage/flanged at pipe end, accessories etc. (2 -way on/off type with status feedback) and including the as per the manufacturer's specifications & as directed by Engineer-in-charge. (All required materials, consummables, spare parts, components etc., as required is included in quoted price except supply of motorized valve.)

150 mm dia

50 mm dia

Supply,Installation Testing and Commissioning of the following Ball Valves with Strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.

32 mm dia

25 mm dia

20 mm dia

Installation Testing and Commissioning of the following Ball Valves with Strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.

25 mm dia

20 mm dia

Supply,Installation Testing and Commissioning of the following Ball Valves without strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.

32 mm dia

25 mm dia

20 mm dia

Installation Testing and Commissioning of the following Ball Valves without strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.

32 mm dia

25 mm dia

20 mm dia

Supply, installation, testing & commissioning of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end, pipe end flanged & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.

50 mm dia

installation, testing & commissioning of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal, including the supply & fixing the flanged pipe end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.

Installation Testing and Commissioning of Flexible Pipe Connection (double arch PN 16 rating) at pumps suction and discharge (Material of Construction-Neoprine Rubber combined with metal/textile reinforcement ) suitable for operation between Temperature rage:- -10 to 150 degree celcius

150 mm dia

50 mm dia

Supply,Installation Testing and Commissioning of the following water flow switch which shall be an integral, mechanical, non-coded, non-accumulative retard type. Water flow Switches shall have an alarm transmission delay time, which is conveniently adjustable & should be complete as per the specifications.

32 mm dia

Supply, installation, testing and commissioning of cooling thermostats for various Air Handling Units and Fan Coil Units as per specifications including all accessaries ,mountings,wiring between thermostat & unit, terminations etc.

Proportional thermostats for Air Handling Units

Snap acting thermostats for Fan Coil Units

Snap Acting digital display type Humidistat at air-handler.

Supply, installation, testing and commissioning of the following Drain Valves (full way)of gunmetal construction duly insulated as per specifications and drawings.

25 mm dia

20 mm dia

Supply, installation, testing and commissioning of GUN METAL Purge Valves duly insulated as per specifications and drawings complete in all respect.

25 mm dia

20 mm dia

Supply,installation,testing and commissioning C.I. double acting air valve of 20 mm dia. of approved quality with bolts, nuts, rubber insertions etc.It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge.

20 mm dia.

DRAIN PIPE

Providing and fixing in position the following GI medium class cut to required length and installed with screw joints including the necessary fittings, supporting arrangements like clamps etc. (bends, tees, unions, sockets etc) duly insulated with 25 mm thick TF quality thermocole pipe section as per specifications.

40 mm dia

32 mm dia

25 mm dia

Providing and fixing in position dial type mercury-in-glass filled industrial thermometers

AIR DISTRIBUTION DUCT FOR AIRCONDITIONG OF OTs)

Supply, fabrication, installation and testing of Aluminium ducts for OT's in accordance with the approved shop floor drawing complete with all accessories, bends, fittings, specials, chutes, vanes, necessary supports etc. as per specification.

20 gauge Aluminium Ducting

AIR DISTRIBUTION (FOR AIRCONDITIONING)

Supply, Installation, Testing & Commisioning of Pre-Insulated Polyurethene Foam Duct Board/panel.The thickness of board shall be 20 mm, density of foam shall be 45kg/m3 , thermal conductivity 0.020 W/m.K . The aluminium foil shall be 80 micron thick provide on one side and 80 micron on other side.The foil shall be embossed. The fire and smoke classification shall comply of Class "O" of BS 476 part 6.7 - Class A ASTME 84 and all accessories, adhesive, sealent and tape used in duct fabrication of Panel Manufacturer.

Installtion, testing & Commisioning of Pre-Insulated Polyurethene Foam Duct Board/panel.The thickness of board shall be 20 mm, density of foam shall be 45kg/m3 , thermal conductivity 0.020 W/m.K . The aluminium foil shall be 80 micron thick provide on one side and 80 micron on other side.The foil shall be embossed. The fire and smoke classification shall comply of Class "O" of BS 476 part 6.7 - Class A ASTME 84 and all accessories, adhesive, sealent and tape used in duct fabrication of panel manufacturer.

Supply, installation, testing and commissioning of extruded aluminium powder coated linear grills of approved shade and make as per specifications including any framework required for fixing of linear grilles.

150 mm wide Linear Grilles

100 mm wide Linear Grilles

Supply, installation, testing and commissioning of Volume control device of extruded aluminum construction in black anodized finish for Linear grills.

DUCT ACOUSTIC

Supply, installation testing and commissioning of acoustic insulation. Material shall be open cell nitrile rubber ( with self adhesive ) based- fibre glass free with 140-180 Kg/m3 density and all accessories as per specification.

15 mm thick acoustic lining.(For Air Conditioned Area)

15 mm thick acoustic lining.(For OT)

SUB TOTAL (LOW SIDE HVAC)

AIR DISTRIBUTION DUCT (FOR VENTILATION)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 MM Galvanized Sheet Steel Ducting

Thickness 0.8 MM Galvanized Sheet Steel Ducting

Thickness 1.0 MM Galvanized Sheet Steel Ducting

Thickness 1.25 MM Galvanized Sheet Steel Ducting

Alignment, Testing & Commissioning of fabricated at site GSS sheet metal rectangular/round ducting & provide angle supports etc. as required complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 MM Galvanized Sheet Steel Ducting

Thickness 0.8 MM Galvanized Sheet Steel Ducting

SUPPLY / RETURN AIR DIFFUSERS

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. (For toilet exhaust)

SUPPLY / RETURN AIR GRILLES

Supplying & fixing of powder coated extruded aluminium Supply/Return Air Grills with louvers but without volume control dampers complete as required. (For supply of Pressurization of Lift well/lobby/staircase +OT exhaust +Kitchen supply & exhaust)

AIR WASHER - DOUBLE SKIN

Supply, installation, testing and commissioning of double skin Air washer unit with 200 mm thick impregnated cellulose paper media (Celdek pads) of imported Origin of minimum 90% efficiency, factory assembled, distribution header, GI 'B' class piping, makeup, quickfill and drain connections, Butterfly/Gate valves for Pumps, make up, drain & quickfill connections of Sump, 2 Nos. pumps of suitable capacity (1W +1 S), Y strainers and necessary fittings etc.. The quoted price shall also include GI frame and supporting structure for Celdek pads, washable synthetic fibre filters (of 90% efficiency down to 10 micron) and SS(18 gauge) sump,TEFC Motor (IP:55) Control panel complete with necessary Switchgear, Starters, metering, power and control wiring between Control panel and Motor/Pump etc. & drive unit complete with Pulley, Belts, Fresh air Louvers with bird screen (GI Construction), BMS compatibility etc. as per specification & as directed by Engineer- in-charge.. Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings etc.in all respect shall be in contractor's scope.

Duty: Kitchen Supply

Air Qty : 12,000 CFM

Static Pressure : 50 mm wg

Fan Motor HP :As Reqd.

Pump Motor HP : As Reqd.

SCRUBBER (DOUBLE SKIN)

Providing and fixing, testing and commissioning of Double skin kitchen scrubber having 18 G G.I. sheet metal fan section,with powder coated 18 G G.I. sheet encloser, pre filter section for removal of oil grease, followed by intaks louvers, impingement plate section, high pressure water atomisation section, mist eliminator and oulet cone section, expansion chamber, nozzles, strainer, belt drive with guard, gasket tight access door, eliminators, water circulation pump, isolation valve for pumps, vibration isolators for blower distribution panel, BMS compatibility etc. complete as per specifications and drawings & as directed by Engineer- in-charge.. Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings etc. in all respect shall be in contractor's scope.

Duty: Kitchen Exhaust (Ground Floor)

Air Qty : 15,000 CFM

Static Pressure : 65 mm wg

Fan Motor HP : As Reqd.

Pump Motor HP: As Reqd.

AXIAL FLOW FANS

Supply, installation, testing and commissioning of Axial Flow Fans as shown in drawings. Fan motor shall be suitable for 3 phase, 50 Hz AC supply & BMS compatible. The capacity of the fan given as under:-

Duty : Normal/Smoke Exhaust (Ground To Fourth Floor)- Corridor ventilation etc.

Air Quantity : 5,000 CFM

Static Pressure : 20 mm wg

Motor Rating : As Reqd.

Duty : Normal/Smoke Make up air (Ground To Fourth Floor) -Corridor ventilation etc.

Air Quantity :4,500 CFM

Static Pressure : 20 mm wg

Motor Rating : As Reqd.

Duty : Normal/Smoke Exhaust corridor (Fifth Floor) etc.

Air Quantity :4,500 CFM

Static Pressure : 20 mm wg

Motor Rating : As Reqd.

Duty : Make up air (CORRIDOR) (Fifth Floor) etc,

Air Quantity :4,000 CFM

Static Pressure : 20 mm wg

Motor Rating : As Reqd.

INLINE FANS

Supply, installation, testing and commissioning of inline ducted Fans as shown in drawings. Fan motor shall be suitable for single phase, 50 Hz AC with fan regulator, canvas connection etc. The capacity of the fan given as under:-

Air Quantity : 500 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Floor : Ground, First & Second

Air Quantity : 450 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Air Quantity : 400 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Floor : First

installation, testing and commissioning of inline ducted Fans as shown in drawings. Fan motor shall be suitable for single phase, 50 Hz AC supply.(Price is inclusive for the regulator as per below FAN capacity , canvas connection) The capacity of the fan given as under:-

Air Quantity : 1000 CFM - Plant Room etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Air Quantity : 800 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : 450 Watt

Floor : Ground,First,Third & Fourth

Air Quantity : 750 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Air Quantity : 625 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Air Quantity : 600 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

Air Quantity : 300 CFM -Toilets etc.

Static Pressure : 12 mm wg

Motor rating : As Reqd.

FAN SECTIONS

Supply, Installation, Testing and commissioning of single skin Fan Section as shown in drawing and as per specifications. Each unit shall be complete with casing (16G) DIDW centrifugal fan, belt drive, motor, louvers, BMS compatible etc. Fan motor shall be suitable for 3 Phase, 415 ± 10% V, 50 Hz AC supply. Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings etc. in all respect shall be in contractor's scope.

Duty: Lift Well Pressurisation

Air Quantity : 16,400 CFM

Static Pressure : 40 mm wg

Motor Rating : As Reqd.

Location : Terrace Floor

Duty: Lift lobby Pressurisation

Air Quantity : 15,000 CFM

Static Pressure : 40 mm wg

Motor Rating :As Reqd.

Location : Terrace Floor

Duty: Staircase Pressurisation

Air Quantity : 13,500 CFM

Static Pressure : 40 mm wg

Motor Rating :As Reqd.

Location : Terrace Floor

Duty: Lift Well for staircase pressurisation

Air Quantity : 25000 CFM

Static Pressure : 40 mm wg

Motor Rating : As Reqd.

Location : Terrace Floor

PROPELLER FANS

Supply, installation, testing and commissioning of direct driven Propeller fans for exhaust air as shown on drawings and as per specifications. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Fan capacities and Electrical characteristics shall be as follows:

Duty: Exhaust

Air Quantity : 1500 CFM

Static Pressure : 10 mm wg

Motor Rating : As Reqd.

Duty: Exhaust

Air Quantity : 1000 CFM

Static Pressure : 10 mm wg

Motor Rating : As Reqd.

Air Quantity : 250 CFM -Toilets

Static Pressure : 5 mm wg

Motor rating : As Reqd.

Floor : Second

Air Quantity : 200 CFM -Toilets

Static Pressure : 5 mm wg

Motor rating : As Reqd.

Air Quantity : 150 CFM -Toilets

Static Pressure : 5 mm wg

Motor rating : As Reqd.

Air Quantity : 100 CFM-Toilets

Static Pressure : 5 mm wg

Motor rating : As Reqd.

Supply, Installation and Balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh birdscreen & volume conrtol dampers as per specifications.

Fresh air louvers

Exhaust air louvers(without volume control dampers)

Electrical - HVAC Items

End Termination

Suppling & making of indoor end termination with brass compression gland & Al. lugs for following size of PVC insulated & PVC sheathed / XLPE Al. or Cu. conductor cable of 1.1 KV grade as required.

3.5C x 50 Sq. mm

3C x 10 Sq. mm

3½ x 95 sq. mm

3½ x 185 sq. mm

3½ x 300 sq. mm

Earthing

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required

Providing and fixing 25 mm x 5 mm copper strip in surface or in recess for connections etc as required

Providing and fixing 25 mm x 5 mm G.I strip on surface or in recess for connections etc as required

S/ F MS CABLE TRAYS

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F MS CABLE TRAY BENDS

Supplying and installing following size of perforated pre-painted M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F MS CABLE TRAY TEE'S

Supplying and installing following size of perforated pre-painted M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

AHU PANEL

INCOMER

1 No.250A 4P MCCB

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-250A) Ammeter with ASS with 3 nos. 250/5A CT's

BUS-BAR

1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

2 No. 125A TPN MCCB

3 Nos. 63A TPN MCB

7 Nos. 40A TPN MCB

Installation, Testing & Commissioning of above described Panel. (All required materials, consummables, spare parts, components etc., as required is included in quoted price)

AHU SDB

INCOMER

1 No.125A 4P MCCB

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-125A) Ammeter with ASS with 3 nos. 150/5A CT's

BUS-BAR

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

4No. 40A TPN MCB

8No. 32A TPN MCB

4No. 16A TPN MCB

Installation Testing & Commissioning of above described Panel. (All required materials, consummables, spare parts, components etc., as required is included in quoted price)

EMERGENCY VENTILATION PANEL

INCOMER

1No. 315A 4P MCCB (25 KA)

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-315A) Ammeter with ASS with 3 nos. 315/5A CT's

BUS-BAR

1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

2 Nos. 160A TPN MCCB

9 Nos. 63A TPN MCB

Testing & Commissioning of above described Panel. (All required materials, consummables, spare parts, components etc., as required is included in quoted price)

EMERGENCY VENTILATION SDB

INCOMER

1No. 160A 4P MCCB (35 KA)

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

BUS-BAR

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

9 Nos. 40A TPN MCB

3 Nos. 32A TPN MCB

Installation Testing & Commissioning of above described Panel. (All required materials, consummables, spare parts, components etc., as required is included in quoted price)

MAIN HVAC PANEL

INCOMER

1200A 4 pole ACB (EDO) having microprocessor based programmable trip setting for releases for the following integral protection:

METERING & INDICATION

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-160A) Ammeter with ASS with 3 nos. 1200/5A CT's

BUS-BAR

1 Set of 1200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

3 Nos. 630A TPN MCCB for 3 nos. (2W+1 S) 160 Tr. Capacity Air cooled chiller with on/off indication lamps

1 No. 630A TPN MCCB (spare)

2 Nos. 160A TPN MCCB (spare)

1 No. 125A TPN MCCB (spare)

3Nos. 63A TPN MCCB for 3 Nos. of chilled water pumps (2 W+1 S) with on/off indication lamps.

1 No. 63A TPN MCCB (spare)

3 No. 25A TPN MCCB for 3 NOS. (2W+1 S) of hot water OT pumps With 5 H.P DOL Starters with on/off indication lamps.

Comprehnsive services, overhauling and Installation, testing and commissioning through OEM / Authorised channel partner of above described Panel. (All required materials, consummables, spare parts, components etc., as required is included in quoted price)

Control Panel in Air Handling Unit Rooms :

installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall. It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge.The panel shall include the following accessories :

Terminal block for power distribution.

Single Phase Preventor.

Phase indicating lights and indicating lights for ON/TRIP status

Time delay relay for automatic restart of AHUs motors.

All starters shall have suitable potential free contacts

Wiring for microswitch for stopping the fan when fire dampers closes.

Space for bypass starter of AHUs VFDs in the panel

MCCB as per rating given below.

The number of AHU panel shall be as detailed below :

10 amps TPN MCB with 1 No.1.0 to 1.5 HP (Horse Power) DOL Starter for AHU fans

16 amps TPN MCB with 1 No. 2.0 to 4.0 HP (Horse Power) DOL Starter for AHU fans

25 amps TPN MCB with 1 No. 5 HP (Horse Power) DOL Starter for AHU fans

32 amps TPN MCB with 1 No. 7.5 HP (Horse Power) DOL Starter for AHU fans

63 amps TPN MCB with 1 No. 12.5 HP (Horse Power) star delta Starter for air scrubber fan motors

Control Panel for Fresh Air/Exhaust fans/Air washer/Scrubber and pressurisation fans :

Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications. The panels shall include the following accessories :

Terminal block for power distribution.

Single Phase Preventor.

Phase indicating lights and indicating lights for ON/TRIP status

Time delay relay for automatic restart of Fan motors.

All starters shall have suitable potential free contacts

MCCB as per rating given below.

The number of El. Panels shall be as detailed below :

10 amps TPN MCB with 1 No.1.0 to 1.5 HP (Horse Power) DOL Starter for air washer pump

16 amps TPN MCB with 1 No. 2.0 to 4.0 HP (Horse Power) DOL Starter for axial fans & scrubber pump

63 amps TPN MCB with 1 No. (15HP to 18 HP) (Horse Power) star delta Starter for air scrubber fan motors

Control Panel for Fresh Air/Exhaust fans/Air washer/Scrubber and pressurisation fans :

Installation,Testing and Commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications. The panels shall include the following accessories :

Terminal block for power distribution.

Single Phase Preventor.

Phase indicating lights and indicating lights for ON/TRIP status

Time delay relay for automatic restart of Fan motors.

All starters shall have suitable potential free contacts

MCCB as per rating given below.

The number of El. Panels shall be as detailed below :

16 amps TPN MCB with 1 No. 2.0 to 4.0 HP (Horse Power) DOL Starter for axial fans & scrubber pump

32 amps TPN MCB with 1 No. 7.5 HP (Horse Power) DOL Starter for fan section & air washer fan motor

40 amps TPN MCB with 1 No. 10 HP (Horse Power) star delta Starter for fan sections

63 amps TPN MCB with 1 No. 12.5 HP (Horse Power) star delta Starter for air scrubber fan motors

POWER & CONTROL CABLING

Supply, laying and fixing of XLPE power cable of 1.1KV grade armoured aluminium/copper conductor cables from main panel board to various equipment through walls/ceiling/on cable tray/in pipe/in ground as per specifications and drawings.

For Chilling Machine

4C x 10 Sq. mm- Aluminium conductor for terrace AHU

3½ x 35 sq. mm- Aluminium conductor

3½ x 70 sq. mm -Aluminium conductor

3½ x 95 sq. mm -Aluminium conductor

3½ x 185 sq. mm - Aluminium conductor

Laying and fixing of XLPE power cable of 1.1KV grade armoured aluminium/copper conductor cables from main panel board to various equipment through walls/ceiling/on cable tray/in pipe/in ground as per specifications and drawings.

For Chilling Machine

3½ x 35 sq. mm- Aluminium conductor

3½ x 70 sq. mm -Aluminium conductor

3½ x 95 sq. mm -Aluminium conductor

3½ x 185 sq. mm - Aluminium conductor

3½ x 300 sq. mm -Aluminium conductor

For Primary Chilled Water Pumps

3C x 6 Sq. mm - Copper conductor

For Hot Water Pump -Copper conductor

3C x 4 Sq. mm Copper conductor

For Air Handling Units, FCUs, Vent Fan Motor & Distribution Panel.

3 x 2.5 Sq. mm -Copper conductor

3 x 4 Sq. mm - Copper conductor

3C x 6 Sq. mm - Copper conductor

3C x 10 Sq. mm- Copper conductor

Supply,installation,testing and commissioning of PVC insulated sheathed 1.1 KV grade armoured Copper control cables for various equipment through walls/ceilings with appropriate clamps / fixing arrangements and complete with termination as per manufacturer's specifications & as directed by Engineer-in-charge.

3C x 1.5 Sq. mm

4C x 1.5 Sq. mm

5C x 1.5 Sq. mm

End Termination

Suppling & making of indoor end termination with brass compression gland & Al. lugs for following size of PVC insulated & PVC sheathed / XLPE Al. or Cu. conductor cable of 1.1 KV grade as required.

3C x 6 Sq. mm

3C x 4 Sq. mm

3C x 2.5 Sq. mm

3C x 1.5 Sq. mm

4C x 1.5 Sq. mm

5C x 1.5 Sq. mm

3½ x 35 sq. mm

3½ x 70 sq. mm

FIRE FIGHTING WORK ITEMS

Contractor shall obtain final No objection certificate from concern Fire Department authority as per statuary norm.

SUBHEAD-I: FIRE PUMP WORKS (NON SCHEDULED ITEMS) FOR HYDRANTS & SPRINKLER SYSTEM

1.NOC from fire authority for complete Building shall be in the scope of Contractor . Only fee paid to the fire authority shall be reimburded against the submission of the receipt and nothing shall be paid extra.

2. All the Fire Fighting works shall be done in compliance of Fire Fighting authority requirement.

FIRE PUMPS - ELECTRICAL

Supply ,installation, testing and commissioning of electrically driven fire-pump, suitable for automatic operation consisting of the following : Horizontally mounted end suction centrifugal pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ A.C supply, complete with flexible coupling and coupling guard as required. Fire pump having C.I. body, bronze impeller and S.S. Shaft with mechanical seal, capable for delivering 2280 Lpm water at 80 mts.head to ensure a minimum pressure of 3.5 kg/cm2 at the Terrace/farthest hydrant. Complete with necessary pressure gauge with gun metal shut off cock on delivery side. The pump should meet the condition of Local fire Authority). 'Squirrel cage induction motor, TEFC type of suitable rating for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 2900 RPM. Common base plate for above pump and motor from M.S. Channel as required size. Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings. 1 pump set for fire hydrant system & 1 pump set for fire sprinkler system.

FIRE PUMPS - DIESEL Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following : Horizontally mounted end suction centrifugal pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ A.C supply, complete with flexible coupling and coupling guard as required. Fire pump having C.I. body, bronze impeller and S.S. Shaft with mechanical seal, capable for delivering 2280 LPM of water at 80 mts. head to ensure a minimum pressure of 3.5.kg/cm2 at the terrace/farthest hydrant. Complete with necessary pressure gauge with gun metal shut off cock on delivery side. The pump should meet the condition of Local fire Authority/NBC). Water Cooled Diesel engine of speed 1800 RPM for the above pump with automatic starting mechanism (AMF autostart panel complete with necessary relays like no volt relay, over voltage and low voltage relays, contactors, timer, pressure switch etc. as required for the auto start of the diesel engine in case of power failure complete with all accessories, wiring & cabling) and other accessories including fuel tank (fabricated from 3mm MS sheet painting with two coats of synthetic enamel paint over a coat of primer) capacity 600 Its (fitted with Magnetic oil level indicator, MH with cover drain valve, Air vent hydraulic pumps including structural supports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings flexible coupling, coupling guard & exhaust pipe ( 150 mm diameter M.S. Class 'C' diesel pump exhaust pipe includings all fittings, like bends, tees etc. clamps / structural steel supports. The pipe shall be provided with 75mm thick fiberglass insulation & covering the insulation with 500 g polythene sheet giving proper overlaps & sealing the joints with suitable adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet cladding.) as per drawing complete as required. Common base plate for above pump and Diesel Engine from M.S. channel of required size. Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings. 24 volts, 180 AH Lead battery ( 12 volts-2 Nos) with boost / trickle charger for starting the engine automatically as required.

Suitable PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings. 24 volts, 180 AH Lead battery - Exide make ( 12 volts-2 Nos) with boost / trickle charger for starting the engine automatically as required.

JOCKEY PUMP:- Supply, installation, testing and commissioning of jockey pump comprising of the following : Horizontally mounted end suction centrifugal pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ A.C supply, complete with flexible coupling and coupling guard as required. Fire pump having C.I. body, bronze impeller and S.S. Shaft with mechanical seal, capable for delivering 180 LPM of water at 8 0 mts.head to ensure a minimum pressure of 3.5 kg/cm2 at the terrace/farthest hydrant. Complete with necessary pressure gauge with gun metal shut off cock on delivery side. The pump should meet the condition of Local fire Authority). Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with a speed of 2900 R.P.M. with flexible coupling and coupling guard etc. as required. Common base plate for above pump and motor from M.S. channel as required size. Suitable cement concrete foundation with plaster, Antivibration arrangement of cushy foot mounting.

Pressure Switch

Supplying, installing, testing and commissioning 0 to 12 Kg/ cm2 ON/OFF pressure switch in delivery line of pump along with control wiring for auto starting and auto stopping of hydrant / spinkler and jockey pumps. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Pressure Vessel Providing, Fixing, testing and commissioning of pressure vessel (450 mm dia & 2000 mm height) for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required excluding cost of pressure vessel. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. (All material is included in quoted price for this item except supply of pressure vessel which is already available at site.)

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators with flange at both end (pipe side & rubber bellow side) suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

200 mm dia

80 mm dia

Fixing, Testing & Commissioning of resilient rubber lined single arch vibration eliminators with flange at both end (pipe side & rubber bellow side) suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Supply, installation, testing, trial run and commissioning of hydrants as per given below. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Internal hydrants/landing valves generally as specified and all complete with:

Installation, Testing & Commissioning in all respect of single headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flange inlet and 63 mm dia instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983

installation, testing & Commissioning in all respect of swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.

Installation, Testing & Commissioning in all respect of Non per colating flexible hose (RRL type – A) ISI marked (IS:636 Type A) 63 mm dia x 15 m long complete with ISI marked Male and female coupling (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 Sq.mm.copper wire.brusting pressure not less than 22 Kg/Sqcm.-1 No.

supply, Installation, Testing & Commissioning in all respect of Non per colating flexible hose (RRL type – A) ISI marked (IS:636 Type A) 63 mm dia x 15 m long complete with ISI marked Male and female coupling (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 Sq.mm.copper wire.brusting pressure not less than 22 Kg/Sqcm. (1 No. ) The material shall be supplied at site after coordination with the existing material.

Installation, Testing & Commissioning in all respect of of standard short size 63mm dia. Gunmetal branch pipe with gun metal nozzle of 20 mm nomnal bore outlet with instaneous type 63 mm dia coupling complete & confirming to IS:903

fixing of standard firemans axe with heavy rubber handle.

Installation, Testing & Commissioning in all respect of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front. (Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )

External hydrant valve, IS marked of gunmetal with generally as specified and as required all complete.

Installation, Testing & Commissioning in all respective material of Siingle headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flange inlet and 63 mm dia instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983

Installation, Testing & Commissioning in all respect of Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type gunmetal 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (Supply of Hose as per coodrinate with the existing material)-1 No.

Supply, Installation, Testing & Commissioning in all respect of Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type gunmetal 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (Supply of Hose as per coodrinate with the existing material)- 1 No.

Installation, Testing & Commissioning of standard short size 63mm dia. gunmetal branch pipe with gun metal nozzle of 20 mm nomnal bore outlet with instaneous type 63 mm dia coupling complete & confirming to IS:903

Installation, Testing & Commissioning in all respect of M.S. fire hose weather proof cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front.

Supply, installation, testing and commissioning brass orifice plates made out of 8mm thick stainless palte in pipelines to reduce pressure from 8 kg. to 3.5 kg/sq.cm. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. 150 mm dia.

Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 4 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 150 mm diameter sluice valve, 1 No. 150mm dia. Non-return valve and wall mounted box of M.S. construction made out of 16 gauge MS Sheet with glass door to house the above mentioned components. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction pipe MS class 'C' 100 mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box M.S. construction made out of 16 gauge MS Sheet with glass door to house the above mentioned componenets. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. (to be connected to static water tank) It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Providing, installing, testing & commisioning of inlet breeching having C.I. body Two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required in Down Comer Riser. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Installation, Testing & Commissioning in all respective material of Air Cushion tank (Air - vessel) 250 mm dia x 1.0 M high with dished top made of minimum 6 mm thick M.S Sheet pipe/ plate complete with 25 mm dia brass . Air Valve (Ball type) 25 mm dia stopcock. Nipple tees. Elbows and all accessories as required including fixing brackets. (Supply, Installation, testing & Commissioning rate is included in quoted price except supply of Air vessel)

SUBHEAD-II(A):PIPING FOR FIRE FIGHTING FOR HYDRANT & SPRINKLER SYSTEM SYSTEM (NON SCHEDULED ITEMS)

Supply, fabrication , laying, testing & commissioning of heavy grade, C class heavy duty MS Pipe controlling to IS 1239/3589 I/c welding, fittings like elbows, tees, flanges tapers, nuts bolts, gaskets etc. in ground including welding, exacavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar / asphalt tape as per 10221, refilling the trench etc. of following sizes.

150 mm nominal bore

80 mm nominal bore

Testing & commissioning of heavy grade IS marked & as approved make list black mild steel piping confirming to IS 1239/3589 complete with all fittings, pipe supports, clamps etc. as approved with weleded jointing for external hydrant system in ground including excavation, refilling the trench . It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

150 mm nominal bore

80 mm nominal bore

Installation, testing & commissioning of heavy grade IS marked & as approved make list black mild steel piping confirming to IS 1239/3589 complete with all fittings, pipe supports, clamps etc. as approved with weleded jointing for external hydrant system in ground including excavation, refilling the trench. All supply rate is included except MS Pipe. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

150 mm nominal bore

80 mm nominal bore

Supply, fixing, testing and commissioning of ball valve (bronze) of approved quality. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

25 MM DIA.

Supply, installation testing & commissioning double flanged MS pot strainers with M.S. body and SS 40-grade mesh strainer, PN 16. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Size 150 mm dia./200 mm dia

Supply, fabrication , laying, testing & commissioning of heavy grade, C class heavy duty MS Pipe controlling to IS 1239/3589 I/c welding, fittings like elbows, tees, flanges tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceilling with suitable clamp / support frame and painting with two or more coat of synthetic enamel paint of required shade complete as required.

Threaded joint upto 50mm diameter pipe.

Welded joint above 50mm diameter pipe.

200 mm nominal bore

150 mm nominal bore

100 mm nominal bore

80 mm nominal bore

65 mm nominal bore

50 mm nominal bore

40 mm nominal bore

32 mm nominal bore

25 mm nominal bore

Testing & Commissioning of heavy grade,class C, IS marked & as per approved make list black mild steel piping confirming to IS 1239/3589 complete with all fittings, pipe supports, complete rectification if any and clamps, hangers & painting with one coat of primer & two coat of finished stove enamelled post office red colour paint etc. as approved with threaded /welded jointing for Wet Riser/Sprinkler System. G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultants requirements including cutting holes and chases in brick and making good the same to original conditions complete in all respects., It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. (Plant Room piping/Vertical Riser/Downcomer/Floor)

Threaded joint upto 50mm diameter pipe.

Welded joint above 50mm diameter pipe.

150 mm nominal bore

100 mm nominal bore

80 mm nominal bore

65 mm nominal bore

50 mm nominal bore

40 mm nominal bore

32 mm nominal bore

25 mm nominal bore

Installation, Testing & Commissioning of heavy grade,class C, IS marked & as per approved make list black mild steel piping confirming to IS 1239/3589 complete with all fittings, pipe supports, clamps, hangers & painting with one coat of primer & two coat of finished stove enamelled post office red colour paint etc. as approved with threaded /welded jointing for Wet Riser/Sprinkler System. G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultants requirements including cutting holes and chases in brick and making good the same to original conditions complete in all respects., It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. (Plant Room piping/Vertical Riser/Downcomer/Floor)

Threaded joint upto 50mm diameter pipe.

Welded joint above 50mm diameter pipe.

150 mm nominal bore

100 mm nominal bore

65 mm nominal bore

50 mm nominal bore

32 mm nominal bore

Providing and fixing dial type SS pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

SUBHEAD-II(B):PIPING FOR FIRE FIGHTING FOR HYDRANT & SPRINKLER SYSTEM SYSTEM (SCHEDULED ITEMS)

Supply, fixing, testing and commissioning of following valves, gauges and stariners as per specifications:-

Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore

100 mm dia.

150 mm dia.

80 mm dia.

50 mm dia.

Installation, testing & Commissioning of Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore

150 mm dia.

80 mm dia.

Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.

100 mm dia.

150 mm dia.

80 mm dia.

SUBHEAD-III: SPRINKLER SYSTEM (NON SCHEDULED ITEMS)

Supply, installation, testing and commissioning of 150 mm dia Installation Control Valve inclusive of 2 nos 150 mm dia Butterfly Valve, strainer, Alarm Valve with Water Motor Gong, Pressure Gauges, Test Lines with Ball Valves with necessary MS Class "C" piping with threaded fittings of required sizes. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Supply, installation, testing and commissioning of 150 mm dia Zonal Control Valve inclusive of 1 nos 150 mm dia butterfly valve, 150mm diam. non return valve, Flow Switch, water pressure gauges & 25 mm dia. Auxillary Drain valve with sight glass with necessary MS Class "C" piping with threaded fittings of required sizes. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Providing, fixing, testing and commissioning of quick response 15 mm dia. gunmetal quartz bulb type sprinkler head to operate at 68 degree centigrade iwith required accessories

Side wall type

Pendent type

Upright Type

SITC of adjustable rosette plate for 15 mm dia in white finish UL listed of FM approved complete as required for above mentioned sprinkler

Installation, testing and commissioning of quick response 15 mm dia. gunmetal quartz bulb type sprinkler head to operate at 68 degree centigrade including two piece of adjustable C.P. Rosset complete as required. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Side wall type

Pendent type

Upright Type

SITC of sprinkler flexible (UL listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (burst) with branch line (inlet) 25mm NPT make thread to sprinkler head (outlet) 15mm NPT female thread with reducer, nipple, 2 side bracket, center bracket, stockbar of following size of complete as required.

Length upto 1200 mm

Length upto 1500 mm

installation, testing & Commissioning in the false ceilings, high pressure metallic hose with fittings (25 NB at one end for connection to pipe and 15 NB at the other end for the Sprinkler) for connecting the Sprinklers to Sprinkler piping system, Hose & Fittings to be UL listed or FM approved and installed in accordance with para 9.2.1.3.3 of NFPA-13 (2007 edition) Test Pressure 10.0 Kg/Sq.m.

Length upto 700 mm

Length upto 1200 mm

SUBHEAD-IV: FIRE EXTINGUSHER (NON SCHEDULED ITEMS)

installation, testing and commissioning in all respect of halon free portable fire Extinguishers as described below:

installation, testing and commissioning in all respect of 4.5 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder. he Quoted Price shall be inclusive of Gas re-filling of the Cylinders.

installation, testing and commissioning in all respect of 6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers. The Quoted Price shall be inclusive of Gas re-filling of the Cylinders.

installation, testing and commissioning in all respect of 9 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers. The Quoted Price shall be inclusive of Gas re-filling of the Cylinders.

installation, testing and commissioning in all respect of Higher capacity Trolley mounted Dry Chemical; Powder type Fire Extinguisher of capacity 25 kg. confirms to IS 10658, bearing ISI mark, ( Outside Cartridge ). The Quoted Price shall be inclusive of Gas re-filling of the Cylinders.

installation, testing and commissioning in all respect of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285 .The quoted price shall be inclusive of Gas re-filling of the Cylinders.

Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.

SUBHEAD-V : ELECTRICAL WORKS (NON SCHEDULED ITEMS)

FIRE FIGHTING PANEL

Supply, installation, testing and commissioning of fire fighting panel suitable for 415V, 3 phase, 4 wires, 50 HZ power distribution system. The panel shall be floor mounted dust and vermin proof conforming to IP-52, Compartmentalized design, fabricated out of 14SWG sheet steel, painting, earthing numbering, danger plate as per specifications and drawings, flush front with Aluminium busbars, separate earthing to be provided throughout the length of the panel. The incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accommodated in modular multitier arrangement. The painting shall be done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided all round the panel and in the back for each cable bending and termination. The panel shall be fabricated by TAC/Fire authority approved vendor. The outgoing feeders inside the panel shall be connected through solid bus bars. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge. Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded . The panels shall be suitable for cable entry from bottom/ top. The minimum fault rupturing of all incoming and outgoing switches/breakers shall be 35KA. The panels shall be fabricated after the approval of fabrication drawings compring of :

INCOMER

1No. 250A TPN MCCB (35 KA)

OUTGOINGS

3 Nos. 200A TPN MCCB (35 KA) 4 Nos. 40A TP MCCB (20 KA) 2 Nos. S/D starter with self illuminated Push button for ON & OFF and suitable rating of contactor and O/L relays, suitable for 70 HP Motor or as required. 1 Nos. DOL starter with self illuminated Push button for ON & OFF and suitable rating of contactor and O/L relays, suitable for 6 HP Motor or as required.

1 No. space for S/D starter with self illuminated Push button for ON & OFF. 1 No. space for DOL starter with self illuminated Push button for ON & OFF. AMF Control & Starter for 70 HP Diesel Engine complete with Contactors, Fuses, MCBs & relaysof suitable rating, as required. Connector Block/Strip of suitable no.of pairs complete with wiring upto all Starters, for parallel operation from control desk.

Contractor shall include in his rates for providing level controllers, switches, wiring, cabling from level controller to panel etc. complete as required to operate the system automatic/manual and pump shall be protected against running dry.

Three No. pressure Switch or as required Wiring from pressure switch to starter - Lot electrical hooter with ON/OFF switch for the above pumps running indication Wiring from pressure switch to starter -1 Lot for above pumps

Suitable rating TPN MCCB for Diesel Engine Control panel

Set of control system to make the system automatic /BMS compatible as per functionl as requirements.

Indication lamp for High/Low Lub.oil pressure, High Water Temp. and Engine ON Indication.

Necessary potential free contact for indication of diesel engine driven fire pump running/fault in the addressable fire alarm panel/BMS Panel.

All standard relays and accessories for automatic operation of diesel engine.The diesel engine driven fire pump shall start automatically in the event of pressure drop beyond preset limit or mains failure or failure of electrical driven pumps to start

One (1) No. pressure Switch.

Wiring from pressure switch to Diesel engine control panel.

One (1) No. 150A TPN MCCB (35KA).

Any other accessaries as required to complete in all respect above Fire panel requirement as per direction of engineer in charge

Note:- CABLE CONNECTION

Control Scheme as per specification

Following provisions to be made in the fire panel:

Audio visual alarm & indications having disconnect/reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset buttons as required. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop.

Protection failure & control cabling. Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working VRV A/c panels is disconnected.Neccessory Control wiring upto A/c panels , relevant relays & contactors etc. as required complete in all respect shall be in the scope the Fire contractors (Control wire shall be paid extra). Remote indication of ON/OFF/TRIP shall be provided through potential free contact. Provision of remote starting/stopping (manuals) of the engine shall be made. All pumps operation shall be controled by flow switches. The logic of control panel based on specifications described above TS. All pumps shall be working automatically or manually.

POWER, CONTROL CABLING & EARTHING

Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.

Power Cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays).

3.5C x 120 Sq. mm

4C x 16 Sq. mm

4C x 10 Sq. mm

3C x 6 Sq. mm

Control Cabling ( PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays).

5C x 1.5 Sq. mm

Supplying and making end termination with brass compression gland & Al. lugs for following sizes of PVC insulated, PVC sheathed/XLPE Al. Conductor cables of 1.1 KV grade as required.

(a) for main pump cable(3.5C x 120 Sq. mm )

(b) for diesel pump cable(3.5C x 120 Sq. mm )

(c) for jockey pump cable(4C x 16 Sq. mm )

Earthing Strip / Wires.

Supply and fixing of vertical down conductor 32 x 6 mm copper strip etc. on approved surface for earthing complete in all respects

Annunciation Panel

Providing, fixing, testing and commissioning of Annunciation Panel 10 zone.

Providing, fixing, testing and commissioning of 2 core X 1.5 Sqmm copper Cable with PVC Condiut for Flow Switch.

ON-OFF Pump Trigger system

Providing, fixing, testing and commissioning of On -Off Switch.

Providing, fixing, testing and commissioning of 3 Core X 1.5 Sqmm copper Cable with PVC Condiut.

Contractor shall include in his rates for providing level controllers, switches, wiring, cabling from level controller to panel etc. complete as required to operate the system automatic/manual and pump shall be protected against running dry.

LV SYSTEM WORKS ITEMS

SUB HEAD - I : CONDUITS AND WIRING FOR TELEPHONES, DATA & MATV SYSTEM

Supply & fixing of following sizes of PVC conduit along with accessories in surface / recessed including cutting the wall & making good the same in case of recessed conduit as required, (for conduiting in working stations From junction box in raceway.)

25 mm dia.

Supply and drawing of Co-axial TV cable RG-6 grade, 0.7mm solid Cu. Conductor PE insulated, shielded with fine tinned Cu. Braid & protected with PVC sheath in exisiting surface / recessed steel/ PVC conduit as reqd.

Supplying and drawing of UTP 4 pair CAT6 LAN & VOICE cable in the existing surface /recessed steel /PVC conduit as required. (for Data Voice Outlet in existing conduit)

Testing & ferruling of UTP 4 pair CAT6 LAN & VOICE cable in the existing surface /recessed steel /PVC conduit as required. (for Data Voice Outlet in existing conduit)

Supplying and fixing of modular Telephone socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

Supplying and fixing of modular TV antenna socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

Supply & instalation of RJ45 female port complete as required.

Supply & instalation of CAT6 UTP patch panel UnLoaded

Supply & instalation of Cat6 UTP XL Keystone connector

Supply & instalation of CAT6 UTP PATCH CORD 1M - Rack end

Supply & instalation of CAT6 UTP PATCH CORD 2M - User end

Supply & instalation of dual Port Face Plate

Supply & instalation of Metal Flush Box - 1/2 module

VOICE SYSTEM (PASSIVE COMPONENTS)

Supply & instalation of CAT6 UTP patch panel UnLoaded

Supply & instalation of Cat6 UTP XL Keystone connector

Supply & instalation of CAT6 UTP PATCH PANEL UnLoaded - EPBX End

Supply & instalation of CAT6 UTP PATCH CORD 1M

Supply, laying, testing and commissioning of following size of 0.61mm dia copper conductor multi pair telephone cable as per suitable for indoor telephone wiring conforming for ITD S/WS - 113 C and S/WS - 114 (actual qty. may vary as per site) in existing conduit/ trench/ tray.

100 pair Ar. Cable

50 pair Ar. Cable

20 pair Ar. Cable

Supply, installation, testing and commissioning of following krone type tag blocks enclosed in MS enclosure of suitable size with lockable cover.

500 pair Tag block (Main Tag Block)

100 pair Tag block

50 pair Tag block

20 pair Tag block

Supply, Installation, Testing and Commissioning of Analog Phones with Caller ID Features as per details tender technical specification.

Supply, Installation, Testing and Commissioning of Digital Key Phones as per details tender technical specification.

FIBER FOR BACK BONE CONNECTIVITY

Supply & instalation of 6 core Indoor/outdoor OM3 Unarmoured Multimode Optical Fiber

Supply & instalation of SC Pigtails MM 50/125mn

Supply & instalation of SC Adapter Unit for 6 Multimode Fibers

Supply & instalation of Fiber Optic Drawer - LIU Unloaded

Supply & instalation of Blanking Plate for LIU

Supply & instalation of SC/LC Duplex Patch Cords OM3 - 2 mtr

Supply, installation, testing & commissioning of digital/ IP based IPABX system in simplex mode and all cards hot swappable and expandable upto 1000 ports and with all features as per technical specifications along with hardware for the following: 300 analog extentions, 20 digital extentions, 16 analog trunk, 1no. isdn pri (30 channels), ip based operator console with desktop pc and headset, built in least cost routing, snmp based system administration, supports H-320 protocol for video conferencing behind IPABX, support dect connectivity- digital cordless extention, lan connectivity, music on hold, voice mail for all users, complete with SMPS, Float cum boost charger, battery back for 1 hr backup, and accessories as required.

Fixing, Testing and Commissioning of 42U rack with front glass, back steel door and side panels, with casters, fan housing units with fans, cable manager, AC main channel with required outlets, earthing kit, Mounting hardware, Stationery shelf complete in all respect as required and as per direction of Engineer in Charge.

Supply, Installation, Testing And Commissioning of RACK 9 U/800D with FAN , PDU (For CCTV - Network Switches)

Installation, Testing And Commissioning of RACK 9 U/800D with FAN , PDU (For CCTV - Network Switches) in all respect as required and as per direction of Engineer in Charge.

SITC of Installation, Testing And Commissioning of Layer 3 Enhanced Managed Gigabit switch with 24 # 10/100/1000BaseT ports and 4 # Gigabit SFP Combo ports. In all respect as required and as per direction of Engineer in Charge.

Installation, Testing And Commissioning of Layer 3 Enhanced Managed Gigabit switch with 24 # 10/100/1000BaseT ports and 4 # Gigabit SFP Combo ports. In all respect as required and as per direction of Engineer in Charge.

Supply, nstallation, Testing And Commissioning of Layer 2 Managed Gigabit switch with 24 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. as required and as per direction of Engineer in Charge. In all respect as required and as per direction of Engineer in Charge.

Installation, Testing And Commissioning of Layer 2 Managed Gigabit switch with 24 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. as required and as per direction of Engineer in Charge. In all respect as required and as per direction of Engineer in Charge.

Supply, erection, testing and commissioning of splitter/ Tap-off terminals for Co-axial cables in suitable size of G.I. Boxes with hinged lockable cover complete as per direction of Engineer in Charge .

Two way Splitter(S2)

1 way Tap-off Box.

2 way Tap-off Box.

Supply, laying and connecting of following: Co-axial TV cable as per specifications in the existing conduit / raceways trays etc complete as per direction of Engineer in Charge .

RG-11 Cable

SUB HEAD - II : ADDESSABLE FIRE DETECTION & ALARM SYSTEM

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required.

2 x 1.5 sq. mm

Testing & Commissioning of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required.

2 x 1.5 sq. mm )

Supply & fixing of following sizes of steel conduit along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia.

Installation, Testing & Commissioning in all respect of wall recess mounted microprocessor based networkable 7 loop Analogue addressable fire alarm control panel (with loop capacity up to 250 devices+detector per loop) with graphic LCD display, inbuilt printer, password protected, 2000 events historical logging flash E-PROM, 220 volts AC power supply, automatic battery charger, 24 volt sealed lead acid battery suitable operating the system for 30 min. in emergency condition. The panel has provision for integration with PA System for hooter complete as required.The panel shall be Networked card and should have provision for integration with PA System for hooters cum speaker or speakers. Material for installation is included up to testing & commissioning. All cost of accessories is inclusive in quoted price to complete as required in all respect.

Supply, installation, testing & commissioning of plug in type intelligent analog addressable photothermal detector complete with mounting base complete as required.

installation, testing & commissioning of plug in type intelligent addressable photoelectric heat detectors including the cost of supplying base plate, . complete as per specification required. cost of accessories is inclusive in quoted price to complete as required.

Supply, installation, testing & commissioning of plug in type intelligent addressable thermal detector (Smoke detector) with rate cum fixed temprature thermistor complete with base as required. complete as per specification required.( Above false ceiling)

installation, testing & commissioning of plug in type intelligent addressable photoelectric smoke detectors including the cost of supplying base plate, . complete as per specification required.( Above false ceiling). cost of accessories is inclusive in quoted price to complete as required.

installation, testing & commissioning of plug in type intelligent addressable photoelectric smoke detectors including the cost of supplying base plate, . complete as per specification required.( Below false ceiling). cost of accessories is inclusive in quoted price to complete as required.

Supply, installation, testing & commissioning of plug in type intelligent addressable thermal detector (Smoke Detector )with rate cum fixed temprature thermistor complete with base as required. complete as per specification required.( Below false ceiling)

Supply, installation, testing & commissioning of intelligent addressable Strobe Cum Sounder Complete as required.

Supply, installation, testing & commissioning of intelligent addressable resettable manual call station (unbreakable glass), all cost of require modules, complete as required.

Supplying, installing, testing & commissioning of Analogue Addressable Response Indicator on surface / recessed MS Box having two LED metalic cover complete with all connection etc as required.

Installing, Testing & Commissioning of Analogue Addressable Response Indicator, approved by LPCB. all cost of require modules and other accessories ,All cost of accessories is inclusive in quoted price to complete as required.

Installing, Testing & Commissioning of intelligent addressable control modules or PA & AHU shutoff etc. and all cost of require modules and other accessories, All cost of accessories is inclusive in quoted price to complete as required.

Installing, Testing & Commissioning of intelligent addressable monitor modules and all cost of require modules and other accessories, All cost of accessories is inclusive in quoted price to complete as required.

Supply, Installation, Testing & Commissioning of intelligent addressable fault isolator modules complete with base for Isolating, Fault Detectors.

Installing, Testing & Commissioning of Intelligent Addressable fault isolator modules for Isolating, Fault Detectors. All cost of accessories is inclusive in quoted price to complete as required.

Installing, Testing & Commissioning of Addressable Active Repeater Panel with LCD display, networkable, Audio Visual Alarm & Status of the Main Fire Alarm Panel as required. All cost of accessories is inclusive in quoted price to complete as required.

Ten loop control panel having CPU with 640 Charcter display including backlite LCD Display qwaty programing and operating manual supporting 1 to 10 signaling line circuit (up to 5 extandable card & suppoorting 103 network modes) complete as required.

SITC of Addressable of Repeater Panel with 320 charcter / touch screen LCD display, networkable,with inbuilt reset, acknowledge and silence switches complete as required .

SUB HEAD - III : IP Based CLOSE CIRCUIT TELEVISON SYSTEM

Supply, Installation, Testing & Commissioning of EN & UL approved Outdoor IR 2MP PTZ dome camera , 1/2.8” Progressive Scan CMOS, Full HD(1080p)@60FPS, Lens : 30x Optical Zoom, 4.5 mm - 135 mm (F1.6 - F4.4) , or better, digital zoom : 16x , Video Compression :H.265,H.264 and M-jpeg, Quad streaming with fully configurable 3 streams at camera H.265 mode and 1 M-jpeg ,sensitivity: Color 0.05, Mono 0.01 , wide dynamic range 90dB , Signal to noise ratio > 55 dB ( with AGC off ) , with edge based essential video analytics like line crossing, loitering, idle / removed object detection, crowd density estimation, occupancy and people counting ,IR illumination Range 180 mtrs,Pan range : 360° continuous , Tilt range (-90° to 3°), 256 nos. of presets and 2 nos of guard tour, 10 Base T/100Base-T, multi Streaming H.264, sodium vapour lamp white balance, Intelligent digital noise reduction, storage over SD card, support up to 2TB. PoE support, complete with Power suppply and Mounting accessories Weather Rating IP66, complete as required.

Supply, Installation, Testing & Commissioning of EN & UL approved IR IP 5MP Dome camera with 1/2.9” Progressive Scan CMOS Automatic Varifocal lens 3.2-10 mm DC Iris with motorized focus & zoom, Video Compression :H.265,H.264 and M-jpeg streams with fully configurable 3 streams at camera, sensitivity Color 0.06 lx & Mono 0.02 lx, Built in IR illuminator with 30 m Viewing Distance,Wide Dynamic range minimum 120dB, Resolution 5MP @20FPS/ 4MP@25FPS/ 2MP@30FPS, Ethernet 10/100 Base-T, Extra audio line input and output,onvif profile S, G compliant ,Motion & tamper detection with edge based essential video analytics like Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking , storage over SD Card support up to 2TB, POE Weather rating IP66 and Vandal Rating IK10.

Supply, Installation, Testing & Commissioning of EN & UL approved IR IP 5MP Bullet camera with 1/2.9” Progressive Scan CMOS Automatic Varifocal lens 3.2-10 mm DC Iris with motorized focus & zoom, Video Compression :H.265,H.264 and M-jpeg streams with fully configurable 3 streams at camera, sensitivity Color 0.06 lx & Mono 0.02 lx, Built in IR illuminator with 30 m Viewing Distance,Wide Dynamic range minimum 120dB, Resolution 5MP @20FPS/4MP@25FPS/2MP@30FPS, Ethernet 10/100 Base-T, Extra audio line input and output,onvif profile S, G compliant ,Motion & tamper detection with edge based essential video analytics like Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking , storage over SD Card support up to 2TB, POE Weather rating IP66 and Vandal Rating IK10.

Supply of NVR support up to 32 channels (all channels pre-licensed) Network storage solution with (minimum usable capacity 16TB is required) energy efficient power supply and cooling fans. 2 x Gigabit LAN Ethernet ports for highest speed iSCSI connectivity. It shall offer Remote monitoring via desktop application, browser or SNMP. It shall provide a minimum of 32 concurrent iSCSI connections. Server Configuration Bandwidth 310mbps minimum Processor-Intel N3150 (2 MB Cache, 2.08 GHz) RAM-4 GB, DDR3L‑1333 MHz Hard drives 4 Trays: 3.5-inch SATA Operating temp +10 °C to +35 °C Approved Make- Bosch/Axis/ Sony/Avigilon

Supply, Installation, Testing and commissioning of Client Workstation supports latest Windows (64-bit,Professional or Enterprise),Internet Explorer 11, Intel Core i7 4770 3.4 GHz (up to 3.9 GHz), Minimum 8 GB RAM,1000Base-T,Video resolution 1280x1024 pixels or higher,32 bit 102-key keyboard and mouse.

Video management system software for 200 cameras,5 client work stations and future expendable up to 250 cameras, support integration of third-party cameras, storage and further systems into VMS,Edge Video Content Analysis and centralised recording management, windows based redundent system software architecture,Embedded resilience keeps operations up and running in case both the management server and recording server/s fail etc,complete as required.

Server for VMS Application supports Windows Server 2016 (64-bit), Intel Xeon E5-2620v3 (2.4 GHz,6-core, 15MB, 85W) ,with 8GB RAM,15GB Free disc space with Min 1 Gigabit/s network interface card etc.

Supply, Installation ,Testing and Commissioning of 43" LED colour Full 4K HD TV monitor for Live View and Replay of Recorded View.

PTZ Control Keyboard with jog shuttle, joystick 38backlit keys, alarm buzzer, 4-axis HID joystick for a smooth PTZ control etc fully programmable and USB Powered.

Supply, installation, testing & commissioning of 24port Layer 2/3 Network Swtich POE as per direction of engineer Incharge.

Supplying and Laying of RG 59 cable in existing steel / PVC conduit as required.

SUB HEAD - IV : ACCESS CONTROL SYSTEM

Supply , installation, testing & commissioning of smart card readers as per specification suitable for mounting on metal surface/metal frames or wooden frames wall or as required based on site conditions including all accessories

Supply, installation, testing and commissioning of Finger print (Biometrics) readers with keypad suitable for mounting on metal surface/ metal frames or wooden frames or wall or as required based on site conditions including all accessories.

Supply, installation, testing and commissioning of Smart Cards type re-programmable and site printable proximity cards with inbuilt memory of 4 KB complete as per specification

Supply, installation, testing and commissioning of Two Door Controller for Controlling the above card readers with LAN onboard, TCP/IP interface as per specification mentioned including all accessories. (Tenderer to mention quantity of controllers based on their system and all controllers shall be installed in the BMS room only.) Central access control controller complete with tamper switch, power electronics tamper switch etc. which with connect to the door controllers as stated above, if required

Supply, installation, testing and commissioning of electromagnet door holder (fail safe type) of 15 lb holding force for the following doors :

Supply, installation, testing and commissioning of Door Contact

Supply, installation, testing & commissioning of Card Programming Unit for field programming of proximity cards.

Supply, installation, testing and commissioning of master switch for opening all access control door. Quoted price shall be inclusive of wire in 25 mm dia MS conduit between doors and switch.

Supply, laying, testing and commissioning of the following cables in existing 25 mm dia MS conduits

8 Conductor, 18-24 AWG, with sheild

3 Pair, 20 AWG shielded cable

3 x 1.5 sq.mm power twisted pair copper cable

SUB TOTAL ACCESS CONTROL SYSTEM

SUBHEAD- V - PUBLIC ADDRESS SYSTEM

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.

2 x 1.5 sq. mm

Testing of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.

2 x 1.5 sq. mm

AMPLIFIERS :

Supplying, installing, testing & commissioning of 800 W PA amplifier includes an built in 5 band graohic equalizer and indicator LEDs for power, signal, temp, overload and fault conditions have been provided. Power output 1150W RMS Max, 800 W RMS & 10% THD, Output regulation <2dB, no load to full load at 1 kHz, input channels 1x mic 1mV / 4.7 kΩ all accessories etc. as required.

ANNOUNCEMENT POINTS:

Supplying, installing, testing & commissioning of PA microphone, high output neodymium cartridge, excellent intelligibility & wide frequency responce, attractive appearance etc. as required.

SPEAKERS:

Supplying, installing, testing & commissioning of 15 W/100V ceiling mounted speaker, aesthetically designed plastic grille and easy mounting with spring loaded clamps etc. as required.

Supplying, installing, testing & commissioning of 15 W/100V wall mounted column speaker, indoor & outdoor applications, aluminium extruded cabinet with die-cast aluminium covers etc. as required.

SUB TOTAL OF PUBLIC ADDRESS SYSTEM

SUB HEAD - VI : NURSE CALL SYSTEM (Installation, Testing & Commissioning)

Installation, Testing & Commissioning of Bed Side Unit – Complete with Nurse Call, additional help alarm & wired remote hand held unit.

Installation, Testing & Commissioning of Central Station – to monitor the nurse call/ UMAI/ additional help alarm for maximum Nos. of beds. Displays 8 bed number along with the audible beep.

Installation, Testing & Commissioning of Central Station – to monitor the nurse call/ UMAI/ additional help alarm for maximum Nos. of beds. Displays 20 bed number along with the audible beep.

Supply, Installation, Testing & coommissioning Hand Held Remote.

SUB TOTAL NURSE CALL SYSTEM

TOTAL AMOUNT FOR LV SYSTEM

LIFTS ITEMS WORKS

Contractor shall obtain No objection certificate from concern LIFT/ electrical inspector authority as per statuary norm.

Sub Head : Lift

Installation, Testing and Commissioning of 20 passenger(1360 Kg.) cum bed gearless lifts with machine room having contract speed of 0.5 M/S serving different floors in the existing shaft complete with combined luminous hall button with seven segment digital hall position indicator at all floor, car operating panel with luminous buttons, seven segment digital car position indicator combined with direction arrows, overload warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby enclosed and as under:-

Load / Speed - 20 Persons (1360Kgs.) / 0.5 Mtr. Per Second

Control - AC VV VF

Automatic rescue device complete with dry maintenance free batteries as required

Travel - 24.4 METER Approx. ONE WAY

Number Of Floors - 6 (G + 5)

Number Of Landing Entrances - 6 (G + 5 )

Number and Position of Car Entrances - 1 (ONE), IN FRONT ONLY

Doors - Power Operated

Size of Lift Well - 2200 X 3000 (MM Wide * MM Depth)

Lift Car Inside Size - 1300 X 2400 (MM Wide * MM Depth)

Type or Design of Lift Car - Stainless Steel - Scratchproof - Moon rock finish, toughened glass enclosure. The ceiling panel shall be with at least 4 down lights (CFL Type) in stainless steel panel, Ceiling cabin fan.

Car Fittings : Led -4 nos. & Regular (Circular) - 2 nos. Fan

Type Of Car Entrance Protection - Power Operated Side Opening (COLLAPSIBLE) Sliding Door - Stainless Steel - Scratchproof - Moon rock finish

Type Of Landing Entrance Protection - Power Operated Side Opening (COLLAPSIBLE) Sliding Door - Stainless Steel - Scratchproof - Moon rock finish

Type Of Landing Frame - Stainless Steel - Scratchproof - Moon rock finish

Clear opening of Gates / Doors - 1200 X 2000 (MM Wide * MM Height)

Electric Supply - AC 400/440 VOLTS, 3 PHASE, 50 CYCLES

A hand rail not less than 900 mm long at 900 mm above floor level to be fixed adjacent to control pannel in the lift car.

Voice Announcement System in the car to anounce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator & intercom facility to be provided. Also, it should be suitable for usage by disabled persons & having braille buttons etc. It should be compatible with BMS system.

Installation, Testing and Commissioning of 20 passenger (1360 Kg.) gearless lifts with machine room having contract speed of 1.0 M/S serving different floors in the existing shaft complete with combined luminous hall button with seven segment digital hall position indicator at all floor, car operating panel with luminous buttons, seven segment digital car position indicator combined with direction arrows, overload warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby enclosed and as under:-

Load / Speed : 20 Persons (1360Kgs.) / 1.0 M Second

Control - AC VV VF

Automatic rescue device complete with dry maintenance free batteries as required

Travel 24.4 METER Approx. ONE WAY

Number Of Floors : 6 (G + 5)

Number Of Landing Entrances : 6 (G + 5)

Number and Position of Car Entrances : 1 (ONE), IN FRONT ONLY

Doors- Power Operated

Size of Lift Well : 2500 X 2400 (MM Wide * MM Depth)

Lift Car Inside Size : 2000 X 1500 (MM Wide * MM Depth)

Type or Design of Lift Car - Stainless Steel - Scratchproof - Moon rock finish, toughened glass enclosure. The ceiling panel shall be with at least 4 down lights (CFL Type) in stainless steel panel, Ceiling cabin fan.

Car Fittings : Led -4 nos. & Regular (Circular) - 2 nos. Fan

Type Of Car Entrance Protection - Power Operated Side Opening (COLLAPSIBLE) Sliding Door - Stainless Steel - Scratchproof - Moon rock finish

Type Of Landing Entrance Protection - Power Operated Side Opening (COLLAPSIBLE) Sliding Door - Stainless Steel - Scratchproof - Moon rock finish

Type Of Landing Frame - Stainless Steel - Scratchproof - Moon rock finish

Clear opening of Gates / Doors : 1000 X 2000 (MM Wide * MM Height)

Electric Supply : AC 400/440 VOLTS, 3 PHASE, 50 CYCLES

A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to control pannel in the lift car.

Voice Announcement System in the car to anounce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator & intercom facility to be provided. Also, it should be suitable for usage by disabled persons & having braille buttons etc. It should be compatible with BMS system.

Installation, Testing and Commissioning of Goods gearless lifts with machine room (2 Tonne ) having contract speed of 0.50 M/S serving different floors in the lift shaft complete with combined luminous hall button with seven segment digital hall position indicator at all floor, car operating panel with luminous buttons, seven segment digital car position indicator combined with direction arrows, overload warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby enclosed and as under:-

Speed ……………. 0.50 M/S

Floor ………………… G+5

Travel ….. 24.4 Meters (Approx.) ONE WAY

Stops and opening …. 6 (G + 5) All stops on the same side

Control - AC VV VF

Automatic rescue device complete with dry maintenance free batteries as required.

Power- 415V, 3 Phase, 50 Hz. 4 wires system.

Temper proof Infrared curtain covering entire height of the door should be provided

Car with all stainless steel panels in approved finish fitted with protected car entrance by two speed sliding stainless steel automatic doors in stainless finish, clear opening of not less than 900mm protected hoist way entrances at all landings.

Type of doors

Car:Aumatic Power Operated Side opening (collapsible) horizontal sliding stainless steel scratch proof surface

Stainless steel vandal proof landing doors are required

A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to control pannel in the lift car.

Voice Announcement System in the car to anounce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator & intercom facility to be provided.

Size of Lift Well : 2600 X 2800 (MM Wide * MM Depth)

Lift Car Inside Size : 1700 X 2500 (MM Wide * MM Depth)

Clear opening of Gates / Doors : 1700 X 2000 (MM Wide * MM Height)

Car Fittings : Led -4 nos. & Regular (Circular) - 2 nos. Fan

TOTAL AMOUNT FOR LIFTS

Sewage Treatment Plant 120 KLD (STP should be based on MBBR technology)

Design, Supplying, Installing, Testing & Commissioning of Sewage Treatment Plant capacity 120 KLD. The plant proposed shall be 120kld with a main pump room. The plant is proposed to be installed in the Under-ground from the pump room itself for future maintenance. Opening shall be provided on above for this purpose, for the following:

Nature of effluent - Domestic Sewage from Toilet use and kitchen waste,washing waste water.

Daily average flow - 120 Cum / Day

BOD5 - upto 250-450 Mg/L

S. Solids - 250 - 400 Mg/L

COD - upto 450-600 Mg/L

Oil & Grease - 50 Mg / L

Effluent discharge standard after treatment

BOD5 - Less than 30 Mg/L

S. Solids - Less than 10 Mg/L

COD - Less than 100 Mg/L

Oil & Grease - Nil

Sewage treatment plant shall include the following items:

Screen Chamber

Sewage equalization tank/sump

MBBR Tanks

Settling/ Clarifier Tank

Clear Water tank

Softener Feed PUMPS

Soft Water tank

Sludge Holding Tank

Plant Room Sump

Filtration through MGF & ACF,softner

Air Blowers, Pumps & equipment,filter press.

Piping, valves etc

Electrical Panel & Cabling

Common plant room adjacent to STP.

All piping, valves & level indicator/controller etc. within plant room.

It shall be in the scope of specialized STP contractor to prepare detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for main components and additional components such as inserts, puddle flanges, vent pipes etc. if so required for the complete work, flow diagram, equipment list, power load requirement, design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design, Submission of detailed GOOD FOR CONSTRUCTION' stage architectural, structural, construction, electrical, mechanical and piping drawing for approval.

All tanks of STP will be of RCC & its construction will be in civil contractor's scope. STP vendor will give their requirements like capacity of these tanks to civil contractor.

Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated Screen with suitable lifting arrangement (size 600 mm wide x 1200 mm high approx)

Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxiliary NO/NC contacts.

Supply, installation, testing & commissioning of non clogging type pumps, having C.I. casing & bronze impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty.

Submersible Transfer Pumps (2 Nos. - One working & one standby)

(Solid handling Cap. 38 mm)

Flow rate (each) = 12 m3 / hr

Head = 10-12 Mtr

Mono block centrifugal Sludge Transfer Pumps/Recirculation pumps (2 Nos. - One working & one stand by)

(Solid handling cap. 10 mm)

Flow rate (each) = 15 m3 / hr

Head = 8-10 Mtr

DIGESTED SLUDGE DISPOSAL PUMP :

Providing, installation, testing & commissioning of screw Sludge disposal pump for the disposal of sludge to tanker or to sludge dry beds. The pumps shall have CI casing, bronze Impeller & SS shaft & sleeve with mechanical rotary shaft seal connected by a flexible tier type coupling to TEFC induction motor mounted on a common channel base-plate with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design. Motor to be suitable for including all necessary piping, valves and other accessories and concrete foundation complete as required. (1 Working + 1 Stand-by) .(ROTO/HP/Positive)

Capacity 2 m3/hr @ 40 m head

Cost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)

Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.

Air diffusion system shall include the following:

Twin type rotary air blowers (one working & one standby) capable of delivering 225 cum/hr (each) of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply

Air piping shall comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good.

Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired

Fine bubble diffusers

For equalization tank -1 Nos.

For sludge holding tank - 1 No.

For MBBR tank- 1No.

Air dispersion system shall be provided for Equalization Tank, Sludge holding Tank and MBBR Tank.

Supply, installation, testing and commissioning of Fludised Media for Aeration Tank (MBBR Media)

Supply, installation, testing and commissioning of Bowl type Centfifuge of required capacity, with interconnecting piping and poly dosing system all complete.

Supplying, installing, testing & commissioning of centrifugal vertical / horizontal filter feed water pumps C.I. Body, bronze impeller with mechanical seal along with motor. Pressure gauge with isolation cock, NRV, Isolation valve on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply.

Capacity : 15 M3/hr.

Head : 25 M

No. of Pumps (1 working + 1 standby)

Operation of pump shall be based on level controller proposed to be installed in tank as per site location. The contractor to ascertain the Head required for pumps as per site conditions and provide accordingly.

Supplying, installing, testing and commissioning of MS vessel filter with frontal piping and associated valves and accessories. Filter shall be suitable for a minimum working pressure of 3.0 kg / cm2 and shall include media, standard fittings like pressure tight manholes, initial charge of media, raw water distributor, under drain system, face piping, pressure gauges etc.,

The Multi-grad filter shall be constructed of M.S material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.

Flow rate : 15 cum/hr

Filter Diameter : A/D mm. 1500 Dia Height 1500 mm

The Activated Carbon filter shall be constructed of M.S material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.

Flow rate : 20 cum/hr

Filter Diameter : A/D mm.1700 Dia Height 1500 mm

Providing and fixing all piping (as described below) and isolation control valves for making the system complete.

SS 304 :Submerged air piping

MS Epoxy : Air piping

GI (C class) for all other water piping

PVC piping (10kg/sqcm) - For all submerged waste water piping.

Electrical Installation

Motor Control Centre

Incoming

200 amps TPN MCCB with the following accessories:

Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets

Bus Bar

200 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves.

Spare MCB’s of following capacities:

32 amps TPN MCB’s 3 Nos.

Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthing for all equipment shall also included

Notes :-

All MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application.

All motor starters shall be provided with Automatic level controller

DOL starters shall be used for motors below 7.5 HP and Star-Delta Starters for other motors .

Provision shall be made for providing potential free contacts to all pumps starters

MCCB /MCB for all STP / WTP/ ETP equipments/pumps as described in sub head WTP, ETP & STP

Contractor shall include all electrical and mechanical items as required to operate the system automatically and also include in his rates any other components/tanks/ equipment/ etc. required to complete the job as required. Only main power supply with the earthing to the STP main control panel/electrical panel shall be provided by the owner through other agencies.

Bypass arrangement shall be provided such that equalization tank pump can be used to pump out sewage to external manhole incase of maintenance of STP.

Note : Cables, control panel, Cable tray and other required item for all above said items shall be inclusive in quoted Price (Including Supply and Laying on ground/cable tray/surface as per site requirements or as directed by Engineer-In-Charge)

Maintenance Contract To operate the entire STP under available load conditions for further period of 30 days on round the clock basis.

To provide services of contractors expert operating personal comprising of :

One Supervisor 4 hrs Three times a week.

One Plant operator one per shift in three shifts.

One helper for general maintenance and assistance. One per shift in three shifts.

Company’s back up services of senior engineers and experts for any major problems, general check up and maintenance and advise. Once a week for 2 hours minimum more or more if required.

All tools, equipment and testing devices to be provided by the contractor.

Consumable including lubricants and chemicals will be provided by Owners.

WTP, PUMPS & EQUIPMENTS

VARIABLE SPEED PUMPING SYSTEM (VSPS)

Supply, installation, testing & commissioning of variable speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, two Nos. variable frequency drives, one No.remote sensors, transmitters, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, two Nos. required capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including suction and delivery headers of G.I "C" class pipe of required dia, isolation valves, NRV of PN-16 grade & vibration eliminators on both suction & delivery side of pumps, power box, equipped with fuses/ isolators/circuit breakers as required.

No. and capacity of Pressure Vessel - 01 Nos. x 200 litres min. (Or as per Manufacturer Calculations)

The system shall also comprise the following:-

Type 8202 pressure transducer with SS pressure sensor and control electronic board. Output 4-20m A on two wires conforming BS-6134 standards and IP 55 protection class.

Domestic Water Supply

Set of Two Pumps ( 1 Working + 1 Standby)

Capacity -150 LPM (Each)

Head - 40 M.

Efficiency - Eff Class-1 motor

Fixed Speed Pumping System (VSPS)

Supply, installing, testing and commissining of fixed speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, sequence running controller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. required capacity M.S diaphragam tank with interchangeable butyl rubber membrane complete in all respects including suction and delivery headers with G.I "C" class pipe of required dia, isolation valves, NRV & vibration eliminators on both suction & delivery side of pumps, valves power box, equipped with fuses/ isolators/circuit breakers as required.

Hot Water Supply

Set of Two Pumps (1 Working + 1 Standby)

Capacity - 60 LPM (Each)

Head - 40.0 M.

Efficiency - Eff Class-1 motor

Providing, fixing, testing & commissioning of horizontal / vertical single/multistage centrifugal pumping set with CI connections, SS impeller, stainless steel shaft and induction motor mounted on common base frame, vibration eleminating pads accessories complete as per specifications. Motor to be suitable for 415 Volts

+ 10%, 3 phase 50 Hz. A/C supply.

Type of pump-Horizontal Multi-stage centrifugal pump with axial suction port and radial discharge port with a three phase motor, mounted on a common baseplate.

Filter Feed Pumps (1W +1S)= 1SET

Location - Plant Room

Capacity - 500 LPM

Head - 20 M.

Efficiency - Eff Class-1 motor

STP / ETP Makeup Pump

Location - Plant Room (1W+1SB)= 1SET

Capacity - 275 LPM

Head - 25 M.

Efficiency - Eff Class-1 motor

Flushing water transfer Pump

Location - STP Plant Room (1W+1SB)= 1set

Capacity - 225 LPM.

Head - 40 M.

Efficiency - Eff Class-1 motor

Irrigation water transfer Pump

Location - STP Plant Room (1W+1SB)= 1set

Capacity - 200 LPM.

Head - 25 M.

Efficiency - Eff Class-1 motor

Hot Water Return Pump

Location - Plant Room (1W+1SB)= 1set

Capacity - 225 LPM.

Head - 40 M.

Efficiency - Eff Class-1 motor

Submersible Drainage Sump Pumps (1W +1S)

Sumersible drainage Pumps vertical stage S.S. pump with float type controller automatic operation required flow rate per hour,required head, submersible type, suitable for clear water drainage & 30 mm solid handling capacity complete with motor, control panel, submersible cable, built in suction strainer, bottom support frame and dual plate type NRV’s as required. -

Location - Pump Room (1w+1SB)=1set

Capacity - 210 LPM.

Head - 15 M.

Efficiency - Eff Class-1 motor

Location - STP/ETP plant room Drainage (1w+1SB)=1set

Capacity - 210LPM.

Head - 15 M.

Efficiency - Eff Class-1 motor

The Motor HP to be confirmed by the manufacturer for the duty mentioned for each pump alongwith performance characteristic curve.

The Motor of pumps shall be suitable for operation with variable frequency drives system.

Providing, laying, testing & commissioning of G.I. "C class" pipes and fittings conforming to IS: 1239 (Heavy class) with fittings, union and clamps including cutting holes in wall, makes chases in wall and making good the same in cement mortar 1:2 (1cement : 2 coarse sand) as directed by Project Manager complete in all respects for internal works including pipe supports with galvanised M.S. slotted angle iron, clamps, spacers as required and making good wherever required.

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Painting of G.I. pipes with two or more coats of synthetic enamel paint of approved quality over a coat of red oxide zinc chromate primer as directed by the Engineer-in-Charge (shade as per pipe colour code).

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing, laying, testing & commissioning of cast iron double flanged butterfly valves (PN-16) complete with 2 nos. matching flanges,bolts, nuts, 3.0 mm thick insertion neoprene gasket.

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing, laying, testing & commissioning of cast iron double flanged dual plate type check valves (PN-16) including 2 nos. matching flanges, nuts, bolts, 3.0 mm thick thick insertion neoprene gasket.

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing, laying, testing & commissioning of resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto pressure 20 kg/cm2.

50 mm dia

65 mm dia

80 mm dia

Providing, laying, testing & commissioning of CI Y type suction strainer with gunmetal or brass internal parts installed outside water tanks.

80 mm dia

100 mm dia

Providing, laying, testing & commissioning of forged brass ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects.

32 mm dia

40 mm dia

Providing, laying, testing & commissioning of The following Automation and instrumentation including supply, installation, testing and commissioning of all sensors, relays, level controller/switches, level indicators etc. Relays/Modules and wiring for completely functional system.

For Automatic switching ON-OFF of following pumps:

Level Controller (four level float type) installed in Raw Water Tank including Dry Run Preventor for each of the above pumps by providing Low level sensor in the tanks viz.Raw Water tank (Underground), Treated Water Tanks (Underground), Flushing tank (Underground), Garden Irrigation Tank (Underground), Flushing tank (Overhead), Raw Water tank (Overhead), Treated Water Tank (Overhead).

For WTP Plant room Drainage Sump Pumps.

Level Controller (four level float type)To cut off duty pump on low water level in the sump, To start pump at high water level in the sump and both pumps start when water over flowing.

For ETP/STP Drainage Sump Pumps

Level Controller (four level float type)To cut off duty pump on low water level in the sump, To start pump at high water level in the sump and both pumps start when water over flowing.

Providing, laying, testing & commissioning of standard dial type pressure gauge dia 100 mm with screwed inlet with isolation cock suitable for liquid gauge to show pressure upto:

(0-5) KG/Sq.cm

(0-10) Kg/Sq.cm

Providing, fixing, testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in iverhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc. (Make: Belimo/Audco/Advance/AIP)

50 mm dia NB Float Valve

Providing, laying, testing & commissioning of Water Filtration Units

The Multi-grad filter shall be constructed of M.S. material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard. The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required. Flow Rate : 30 m3 / h FOR 12 hr Rate of Flow not to be exceed : 17.5 Cu.M/Hr/Sq.M.

The Activated carbon filter shall be constructed of M.S. material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard. The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required. Flow Rate : 30 m3 / h FOR12 hr Rate of Flow not to be exceed : 17.5 Cu.M/Hr/Sq.M.

Providing, laying, testing & commissioning of Chemical Dosing Unit

Medium pressure synchronous motor type chemical dosing pump with noryl Plastic body and PVC parts, dispensing valves, foot valves, relief valves, mounting plate, chemical tank of 250 litre capacity complete.

Capacity 0-6 LPH at pressure head of 40 MWC..

Supplying, installing, testing and commissioning FRP Ion exchange softener complete with GI face piping, with screwed joints, water meter for cumulative recording of water,valves, rotameter, pressure gauges with isolation valves with other accessories as required and conforming to but not limited the following:Flow Rate : 30 m3 / h FOR 12 hr Rate of Flow not to be exceed : 17.5 Cu.M/Hr/Sq.M.

Supply installation, testing and commissioning MS rubber lined brine tank(2000 lit. cap.) fabricated with 5 mm thick MS plate and lined with 4 mm thick rubber duly tested by spark test and certified for proper lining including brine delivery pipes and inclusive of stirrer etc., complete in all respect.

EFFLUENT TREATMENT PLANT : 15 KLD CAPACITY

Supply, Fabrication, installation, testing and commisioning of effluent treatment plant with effluent handling capacity 15 m3 per day. The entire plant will be constructed in MS (FRP coated, min. 3 mm). The ETP shall be designed as water retaining structures, with necessary chemical dosing as required by the manufacturer's design. All the equipment, piping, pumps, air blowers and electrical panel to be housed in the ETP skid including M.S. puddle flange (Galvanised), inlet, outlet, overflow, vent, moving ladders & railing. The Plant shall be complete with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level and other controls. The cost will also include any consequential civil work including making foundations for the structure, pumps, blowers etc. It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge.

Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.

Daily average flow : 15 Cum/Day

BOD : 250 - 600 mg/l