Providing Paver Block Pavement at RD and PR Integrated office complex campus in palayamkottai union at tirunelveli dt gf 2025 2026

Amount

Providing Paver Block Pavement at RD and PR Integrated Office Complex Campus in Palayamkottai Union at Tirunelveli District

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soll, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 208

Cement concrete 1:4:8 mix using 40mm HBG metal for foundation inmcluding watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 100CFT

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak/country wood scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications

Cement concrete 1:3:6 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications

Cement concrete 1:2:4 mix using 20mm HBG metal for foundation including watering wherever 0.95 necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications

Supplying and filling of conveyed Earth by lorry in basement filling including stacking for premeasurement, conveyance loading, and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal 65%,4.75 to 2.36mm IRC HBG metal @20%82.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & % repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix-in-place method)

Providing and Laying Paver Block of 80mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity Including hire and fuel charges for compressor and all other incidental charges etc complete.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3-10 Sqm

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Making new truss using new mateials of MS Hollow sections including cutting the angle to the required length drilling holes wherever necessary for fixing the pipe purlins, rafters and fixing the post etc., complete.

Supplying and fixing of 0.47mm thick Galvalume sheet on Side Cladding with necessary framing supports with neat alignment and necessary rubber beading etc all complete as directed by the departmental officers

Supplying, laying and jointing Gl. Pipes of approved quality and best variety of the following dia including labour fixing Specials, with necessary Labours and Transports etc., Complete. 80mm GI Pipe

65mm GI Pipe

Electrification Wiring with 2*1.5 mm (22/0.3) PVC insulated unsheated Sc Cu conductor of 1100 V Grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable colour for open PVC light point and fan point (for electronic regulator) SD 22

Wiring with 2 x 1.5 sqmm PVC unsheated Sc alu cable of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm T.W Switch box in flush with wall covered with nylon sheet of 3mm thick 5 Amp 3 pin for open PVC plug point SD 36

Wiring with 2X1.5 sqmm (22/0.3/) PVC insulated Sc Unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall or ceiling with PVC accessories and with TW switch box and 15 A 3 pin non interlocking CS plug with continuous earth with painting of suitable. colour for open PVC Power Plug point SD 39

Supply and fixing of single box type 4'40 W flu fitting complete with tube copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheated leads from terminals to the fitting SD 89

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 m down rod with fan clamp with side plates and across arm of size 450mm (18") SD 107

Supply and fixing of 65 mm dia Gl pipe (Class'B) of 4metre length with 300 mm x 300 mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cmx20cmx10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of 25W LED street light fitting with bul and with supply and fixing of 16A fuse unit (500V),5ASP switch inside the MS box and painting with suitable colour etc Complete., SD 98

SERVICE CONNECTION ACCESSORIES L.T. 1100 V PVC ALUMINIUM ARMOURED UNDER GROUND CABLE WITH ISI MARK. 4 Core 10 Sq.mm PVC Armourd UG Cable (SD 203)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door(metal) 1No. 32A DP MCB as incoming and 6Nos 6A to 32A SPMCB outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCBD Band MCB 's should be with ISI mark (likestandard make) SD-151

TRENCHES & SEWAGE LINE Earth work excavation in all classes of soil for pipeline including all cost and conveyance etc complete.

Supply and delivery of 110 mm dia 6 KSC PVC pipe including all cost and conveyance etc complete.

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying

Supplying and Erction and Construction of Swer chambers of required internal dimension 600 x 600 upto0.30 m depth with 230 mm brick masonry inC.M. 1;5 thk of maonry over bed of 1;2;4 R.C.C. 200 mm thk above 100 mm thick P.C.C 1;3;6 cement concrete foundations over M.sand bed of 100 mm thk channelingin 1;2;4 cement concrete, Plastering in 1;3; C.M for internaland extrnalsurface finished with floting coat of neat cement, the work icluding excavation for required depth of gully trap and refillingand making good in the surface with SFRC cover and frame 600 x600 mm Complete., Complying with Std.

RAS CONSTRUCTION (BID ID -1470497)