REPAIR AND MAINT TO HANGER, ROOF, CAMOUFLAGE PAINTING TO ROOF, WALL AND OTHER CONNECTED B/R WORKS IN TECH AREA OF ARMY AVN SQN UNDER AGE (I) CIF (K).

Amount

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, wall pannel any thickness, including cover fillets, complete all as specified and as directed by the Engineer-in-Charge.

S&F high density WPC (wood plastic composite) louvers panel as in ceiling 25 mm thick of any length and width fixed on ceiling including fixing of L corner, ceiling rod fixed with holdfastner, ceiling keel for grid , ceiling slat or any other accessories complete all as specified and directed by Engr-In-Charge. The specification of materil is as under:- (a) The length of WPC panel should have in a single piece and width lie between 203mm to 150mm. (b) Looks and feels like natural wood. (c) 100% non-toxic, non-formaldehyde, environmental friendly. (d) Water-proof;termite-proof. (e) No cracking, anti-impact with high density. (f) Anti-UV, good color fastness. (g) No glue, no need to paint and can be painted. (h) Easy installation and low maintenance. (j) Weather resistant. (k) Flame retardant. (l) Colour and make as approved by AGE (I).

S&F high density WPC (wood plastic composite) louvers panel as in wall panelling 25 mm thick of any length and width fixed on wall surface including of fixing of L corner, buckle with selftapping screws or any other accessories complete all as specified and directed by Engr-In-Charge. The specification of materil is as under:- (a) The length of WPC panel should have in a single piece and width lie between 203mm to 150mm. (b) Looks and feels like natural wood. (c) 100% non-toxic, non-formaldehyde, environmental friendly. (d) Water-proof;termite-proof. (e) No cracking, anti-impact with high density. (f) Anti-UV, good color fastness. (g) No glue, no need to paint and can be painted. (h) Easy installation and low maintenance. (j) Weather resistant. (k) Flame retardant. (l) Colour and make as approved by AGE (I).

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

Galvanised, corrugated mild steel sheeting, 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by the Engineer-in-Charge.

All as per item No 5 above but except sheeting.

Galvanised, plain mild steel sheeting, 0.80mm thick as in ridge, hips,valley gutters,drip and straight flashing, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by the Engineer-in-Charge.

All as per item No7 above but except sheeting.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

S&F 2mm fibre glass reinforced translucent sheet with two corrugation side lap fixed with fixed with coach screws/self tapping screwes and washers, complete as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by the Engineer-in-Charge.

M&L for MS plate, ISMC, MS angle Gde Fe 410W/E250 quality A, as in purline, square cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (incl rivet or nut and bolts) providing and fitting angle cleats Gussete plates etc also for wedging plumbing, truing up and fixing complete as directed by Engr-in-Charge.

M & L for applying two coat of synthetic enamelled paint (camouflage pattern) over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width in camouflage pattern all as directed by the Engr in charge

M & L for prepration of old painted steel surface and applying one coat of synthetic enamelled paint (camouflage pattern) of any description over 10 CM width or girth in camouflage pattern, not otherwise described complete all as spd and directed by the Engr in charge

Note :- An amount of Rs 39,800.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S TARIQ AMIN LONE (BID ID -3189526)

M/S SHIMAR STAR GLACIER (BID ID -3196476)

FM Trading Corporation (BID ID -3195765)

M/S A Q ENTERPRISES (BID ID -3197120)