Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | ₹2.2 L | L1 | Accepted-AOC rate is in estimate rates |
| 2 | L2₹2.3 LRejected-AOC | ₹2.3 L | L2 | Rejected-AOC rate is to high than the estimate rates |
| 3 | Not Admitted-Fee/PreQual/Technical NEAR SADHURAM SCHOOL RAGHUNATHGANJ KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | KAVYA BUILDERS& CO L2 | S M BUILDERS L1 |
|---|---|---|---|---|---|
| 1.00 | Supplying and fixing in position of Aluminium Powder coated PARTITION with 63.50x38.10x 1.85mm @ 1.095 Kg/m extruded box section at bottom, vertical members spaced at 1.20m,2.10m and 2.40m height. The vertical members are spaced at 90cm c/c at equal height.Alu. Clips: 17.3x17.00x0.70mm @ 0.097kg/m The bottom and top panels shall be covered with Medium Density Fibre (MDF) Board 12mm thick Exterior Grade both sides pre-laminated and the centre panels shall be fixed with 5.5mm thick plain glass with necessary glazing clips, rubber beedings etc., including necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and make good to the original condition after fixing. The aluminium surfaces is to be anodized with natural colour finish under Electrically controlled condition in accordance with ISI 1868/1962 specification for an average anadic film thickness of not less than 15 microns. All materials and colour should be got approved by the University Engineer. | 42 | m² | 3,300 ₹1.4 L | 3,150 ₹1.3 L |
| 2.00 | Supplying, fabricating and fixing in position of Aluminium Powder coated finish of DOUBLE LEAVES door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The bottom frame shall be made out of Aluminium rectangular section of size 95.25 X 44.50 X 1.70mm at 1.301 Kg/m. The top frame 47.62 x 44.45 x 1.74mm @ 0.881kg/m, centre mullions [email protected]/m and vertical styles with 47.6 2x 44.45 x1.62 @ 0.881kg/m. The door shutter shall be fixed with necessary accessories such as rubber beading for fixing novapan sheet and for fixing glass,aluminium tower bolts, Handle, lock,PVC felt etc., including cost of materials, labour charges and power consumption charges required for fabrication.All the aluminium sections are to be anodized with Powder coated finish under electrically controlled condition in accordance with I.S. 1968/1962 for an average anodized film thickness of not l`ess than 15 microns and the materials to be used should be got approved by the Univcersity Engineer before use on work. | 13 | m² | 4,400 ₹57,200 | 4,300 ₹55,900 |
| 3.00 | GST @ 18% | 1 | GST Amount (in Rupees) | 35,244 ₹35,244 | 33,876 ₹33,876 |
Tender Value
₹2.2 L
Closing Date
10 Dec 2025, 3:00 pmClosed
REGISTRAR
THE REGISTRAR Bharathiar University Coimbatore -641046
Providing Aluminium Partition in ATC laboratory of Central instrumentation centre in Bharathiar university
2025_HE_626837_1
BU/UE/20D/D-1006/27.11.2025
Limited
Civil Works
100 days
Coimbatore
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
Exempted
13 May 2026
27 Nov 2025
11 Dec 2025
27 Nov 2025
10 Dec 2025
27 Nov 2025
Amount
Supplying and fixing in position of Aluminium Powder coated PARTITION with 63.50x38.10x 1.85mm @ 1.095 Kg/m extruded box section at bottom, vertical members spaced at 1.20m,2.10m and 2.40m height. The vertical members are spaced at 90cm c/c at equal height.Alu. Clips: 17.3x17.00x0.70mm @ 0.097kg/m The bottom and top panels shall be covered with Medium Density Fibre (MDF) Board 12mm thick Exterior Grade both sides pre-laminated and the centre panels shall be fixed with 5.5mm thick plain glass with necessary glazing clips, rubber beedings etc., including necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and make good to the original condition after fixing. The aluminium surfaces is to be anodized with natural colour finish under Electrically controlled condition in accordance with ISI 1868/1962 specification for an average anadic film thickness of not less than 15 microns. All materials and colour should be got approved by the University Engineer.
Supplying, fabricating and fixing in position of Aluminium Powder coated finish of DOUBLE LEAVES door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The bottom frame shall be made out of Aluminium rectangular section of size 95.25 X 44.50 X 1.70mm at 1.301 Kg/m. The top frame 47.62 x 44.45 x 1.74mm @ 0.881kg/m, centre mullions [email protected]/m and vertical styles with 47.6 2x 44.45 x1.62 @ 0.881kg/m. The door shutter shall be fixed with necessary accessories such as rubber beading for fixing novapan sheet and for fixing glass,aluminium tower bolts, Handle, lock,PVC felt etc., including cost of materials, labour charges and power consumption charges required for fabrication.All the aluminium sections are to be anodized with Powder coated finish under electrically controlled condition in accordance with I.S. 1968/1962 for an average anodized film thickness of not l`ess than 15 microns and the materials to be used should be got approved by the Univcersity Engineer before use on work.
KAVYA BUILDERS& CO (BID ID -1530843)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOQ_749526.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
