PROVISION OF APPROACH ROAD, CHAIN LINK FENCING, DRAINAGE FOR MAIN RECEIVING STATION (MRS) AND PROVISION OF PAVED AREA ALONG SEA RETAINING WALL AT INS HAMLA

Amount

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.

Excavation in trenches n exc 1.5m deep and n exc 1.5m wide foundation etc getting out in hard/dense soil complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation complete all as specified and directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, benching, haunching , water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Returning filling up including spereding, leveling watering well ramming in layers n exc 25cm complete all as specified and directed.

Removal of soil to distance n exc, 100m and depositing where directed at a level n exc 1.50m above the starting point complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (40 mm graded aggregate ) in foundations, filling and mass concrete for post holes complete all as specified and directed.

S&F mild steel work in post & struts in fencing including cutting tips to shape as directed. drilling holes. notching for wire etc. including flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting of and similar work conforming Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete

M&L PVC coated chain link fencing, size n exc 40mm x 40mm The dia of GI wire shall be 2.5mm to 3mm and thickness of PVC shall be 1mm to 1.5mm fixed to the posts complete all as specified and directed.

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs and mass concrete complete all as specified and directed.

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts for gate column complete all as specified and directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat rough finished surface of concrete complete all as specified and directed.

M&L form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed.

M & L for Mild steel framed work as in doors , grills, gratings. gate etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars. barred iron doors of angle or other section with gasset plates. rails, complete drilled for fixing of steel sheeting or other covering. Door/gate to be prepared for hanging or sliding including steel sheeting and fittings etc complete. and similar work confirming to Fe 290 0-de E-165 complete all as specified and directed.

Preparation of new or previously untreated surface and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified.

S&F TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.17 above but for stirrups complete all as specified and directed.

S&F Round bars Fe-410-W(Gde.E-250)quality-A or Fe 290 (Gde - E-165) 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for preparation of new surface appling one coat of synthetic enamel paint over coat of red oxide of Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

M & L for Rendering 10mm thick in (1:4) cm to RCC surface, surface finished even and fair without using extra cement mixed with WPC all as specified and directed.

M&L preparation of new surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.complete all as specified and directed.

M & L for Rendering 15mm thick in (1:4) cm brick work surface, surface finished even and fair without using extra cement mixed with WPC all as specified and directed.

Supply only liquid water proofing compound

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M & L for Surface excavation for hard and dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and directed

M & L for hardcore of gauge n. exc 0.63mm deposited, spread and levelled in layers n. exc 1.5 cm thick watered and rammed to a true surface of broken stone boulder complete all as specified and directed .

M&L for 100 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub floors, sub-bases etc for receiving the toping layer finish the surface even & rough, complete all as specified and directed.

M&L precast RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in cover slab and set in CM 1 : 4 including necessary form work complete all as specified and directed.

Supply only sand cushion for paver blocks complete all as specified and directed.

M& L for 100 mm thick Machine pressed precast paver block M-40 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment and complete all as specified and as directed. (Note: sand cushion will be measured and paid separetely )

M&L for providing plain cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in kerb stone coping including framed work for man holes etc including weathering ,slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specifed and directed

M & L for Grubbing up tree trunk exc 250 cm but not exc 300 cm girth including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed.

M&L for moorum filling under floors or pavings, laid in layers n. exc 15 cm thick spread, levelled and rolling to required density as specified and directed by Engr-In-Charge.

M & L for Rolling and consolidating formation surfaces with poser roller exc 8 tonne and n exc 12 tonne complete all as specified and directed.

Material & Labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block 60mm thik made of M-35 grade cement any shape and size conformng to IS 15658-2006 with grey cement and pigment complete all as specified and directed

M&L PCC coping 1 : 2 : 4 type B-1 (using 20mm graded stone aggregate) and weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

R K TYAGIS

Vishal Builders

R.C. Magla and Co.

M/S SURAJ A POUL

C S Sharma and Co