Renovation of D.C. Residence, Boundary Wall and Campus Development at Chatra.

Amount

Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts,levelling,ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of Ei I

Filling in foundation trenches and plinth in layers not exceeding 150 mm thick wellwatered, rammed, fully compacted and fine cressed with earth obtained from excavation of foundation trenches r,vithin a lead of 50 M and lift of '1.SlVl all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plirrth including rammrng and watering in layers not exceeding 150mm thick wiih all leads and lifts including cost of all Materials, labour, royaity and taxes all complete as per building specrfication anci direction of E/l ( Mode of measurement compacted).

Provioing p c c M _ 200 wiih nominat mix of ( 1:'1:5:3 ) in foundation and plinth with approved quality of stone ---- do ----

Providing designation 75 B brick work in C.M.(1:6) in foundation and plinth -do ----

Providing designation 75 B brick work in C.M.(1:6) in Superstrecture and plinth -do ----

Labour for fitting and fixing GCI or CA sheet including all cost of labour and material ………. Do ………. Do …… all complite as per direction of E/I.

Supplying fitting and fixing 40x40x6 MS angles for fixign of CA sheet……..do………do………all complite as per direction of E/i

Providing 12mm. Thick cement plaster (1:6) -do-

Providing 250mm. wide brick drain in cement morta (1:6) with av.150mm. clear depth and 250mm. apron including cost of earthwork involved with 75mm. cement concrete ('1:4:3) over one brick designation 75A,flat soling in proper grade and slope at the base,the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Providing and laying Ceramic glazed wall tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) 11.20.3 Dark shade pigment using ordinary cement

Supplying, fitting and fixing MS grill made of 20x6 mm thick MS Flat ……….do…………..do……….all complite as per direction of E/I.

Supplying, fitting and fixing galvanised Wired mesh jali ……….do…………..do……….all complite as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including preparing plarsterecl sltrlace by rubbing smooth with pumice stone or fine sand paper, appiying putty ivherever required, scaffolding -do-

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface -do-

Provrding two coats of snowcem of approved shade and make over old surface -do-

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147C.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one sidedecorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S.piano hinges conforming to IS:3818 marked with necessary screw etcall complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion - Powder coated aluminium (minimum thickness of powdercoating 50 micron) - (Three track Alumimium Window T nos glaased & one no. wire mesh Pannel)

Providing and fixing 12 mm prelaminated particle board flat pressed three layers............do..........do.................all complite as per building specification and direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc.

15 mm nominal bore

20mm nominal bore

25mm nominal bore

Roldor Natural Walnut Solid Wood Flooring, Thickness all complite as per building specification and direction of E/I.

Area vide item of aluminium

Carriage of maerial

(ii) sand 15km

(iii) Chips 15 km

(iv Bricks (7+1)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per bLrilding specification and directton of E/l.

Providing P.C.C.M-l50 rn nominal mrx of (1'2"4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded andclean coarse sancl of F M.2 5 to 3 including screening, shuttering mixing cement concrete in mixer and placrng in position'lvibrating, strrking, curing, taxes and royalty all complete as per direction of Engineer-in-charge'

Providng R c c M _ 200 wiih nominat mix of ( 1:'1:5:3 ) rn foundation trench plinth with approvecl quality of stone ---- do ----

Providing R.C.C. M200 with nominal mix of (1:1.5:3) in band at plinth level………….do……….do……….

Centring and shuttring including strutting, proping etc and removal of form for………

Foundation, base of Column

Plinth beam

Column

Providing designation75A brick work in C.M.(1:6) in Superstrecture………..do…………….do………….

Providing R.C.C. M 200 with nominal mix of (1:1.5:3) in band at Lintel level with …………..do………..do……..

Providing Tor seel reinforcement of 8mm, 10mm, 12 mm, 16mm, 20mm dia……do………….do………….

Providing 12mm thick cement plaster (1:6)… ……. Do ……… .do………………

Providingtwocoatsofsnowcemovernewsurface-do--do-allcompletejob as per specification and direction of

Supplying,Fitting and fixing MS Grill gate made of 20x6 mm ms Flat……do….do……..all complite as per direction of E/I.

Wiring for fan Point/Light Point/Edjust fan call bell point with 1.5sq. Mm F.R P.V.C insulated copper conuctor single core cable in surface - recessed P.V.C conduit, with pilo tipe switch phenolic laminated sheet, suitable size P.V.C - G.I. box etc . 1.1.1 group A

GroupB

Wiring for Submain wiring along nith earth wire ninth the Foloing do……..do.

1.7.1 2x1.5 sqmm.+ 1x1.5 sqmm Earth wire

1.7.2 2x2.5 sqmm. +1x2.5 sqmm. Earth wire

1.7.3 2x4 sqmm. +1x4 sqmm. Earth wire

Supplying and fixing Folloing site p.v.c Conduit along with accessoris in surface slace recess including cutting the wall and making good the same in case recessed conduit as requred

Supplying and fixing P.v.c /G.l. box of folloing sizes on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required .

Supplying and fixing 6amp and 32amp rating 240 volts B Serico MINIATURE circuit breaker suitable four lighting and athor loads of fllowing poles in the existing MCB/DB complete with conection, testing and commissioning etc. as requried. 2.11.1 6/32 amp Single Pole B Serice.

S/F modular type switch/socket......do......

5/6 amps, one way switch

5/6 amps, two way socket

S/F/F Stepped type electronic fan regulator .....do...do....

ITC ceiing fan……..do……..do……..

ITC Exhaust fan…….do…..do……..

Supplying and fixing Holder type LED 15/16W

Supplying 48" dia celling fan M-773 + 15% CP and installation

Exhaust fan

Earthing with GI earth pipe 4.5 mtr long 40 mm dia including accessories with cover plate and locking arrangement and watering pipe with charcole and salt as required

Earlh work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M -do- -do- all complete job. (5.1.1+5.1.2)

Providing sand filling in foundation trenches -do- -do- all complete job as per specification & direction of E/I. (5.1.10)

Providing 75B brick flat soling joint filled with local sand -do- -do- all complete job. (5.6.3)

Providing P.C.C. (1:2:4) in foundation with Stone Chips -do- -do- all complete job. (5.3.1.2)

Providing 75B brick work in C.M. (1:6) in Foundation -do- do- all complete job. (5.2.6)

Providing R.C.C.M-2000 with nominal mix of (1:1.5:3) in Lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concreting in mixer and placing in position vibrating striking curing, taxes and royalty all complete as per building specification and direction of E/I.(5.3.11)

Providing 12mm thick Cement Plaster in CM (1:6) -do- -do- all complete job as per specification and direction of E/I. (5.7.3)

Supplying fitting and fixing rectified glazed floor tiles ………do……do…..all complite as per diretion of E/I.(11.39 DSR)

Supplying fitting and fixing white glazed wall tiles ………do……do…..all complite as per diretion of E/I.(5.6.23.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc.

15 mm nominal bore

20mm nominal bore

25mm nominal bore

Add 18 % GST (in Basic Rate must fill 18)

Add 1% Labour Cess (in Basic Rate must fill 1)

WAIBHAV CONSTRUCTION