Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹21.9 L+₹1.8 L (9.14%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹19.9 L
EMD Value
₹39,800
Closing Date
3 Mar 2020, 6:00 pmClosed
GE AF ADM AREA MAHARAJPUR
AIR FORCE STN. MAHARAJPUR
REPAIR TO VARIOUS TYPE OF WOODEN FURNITURE FOR MD AND OTHER MISC ACCN AT AF STATION MAHARAJPUR
2020_MES_321302_1
8911/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
AIR FORCE STN. MAHARAJPUR
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE AF ADM AREA MAHARAJPUR
₹39,800
Yes
27 Mar 2020
3 Feb 2020
5 Mar 2020
3 Feb 2020
3 Mar 2020
18 Feb 2020
3 Feb 2020 - 12 Feb 2020
Amount
CHAIR DINNING CUSHIONED LONG BACK. M & L for repair & replacement with new ones of the following part without disturbing the other component incl tightining of frame all specified and shown on drg. Drg No- FD-E6/MAP/10 & Spl
Teak wood strips 04 Nos. size 15x30x500 mm shall be provided to strength of back side support.
Teak wood rails of all side 65x25x450 mm
Teak wood back legs 25x40x900 mm
Teak wood stiffener of 20x25x450 mm
Teak wood wooden stopper 20x50 mm
Teak wood front leg 30x40x400mm
30 mm thick of 32 Density foam with leatherite upholstry of price rate not less than 100/ Sqft as approved by GE . Make of foam Sleepwell/Rajfoam
12 mm thick BWR phenol bonded plywood for seat of size as per drg
Seat & back made of 75mm thick 32 density foam with and including fabric as approved by GE fixed on seat of 12 mm thick ply complete all as specified and directed.
Nylon Buffre
M&L for polishing old and new surface of chair Dining long back after repair with French polish including preparation of surface all as shown on drg complete all as specified and directed.
Repair to Chair Wooden bottom W/O Arm. M&L for repair & replacement with new ones of the following components of chair wooden bottom w/o arm without disturbing the other components including tighting of frame all as specified and shown on drg :-Drg No- FD-225, FD-285
Ply wood commercial type 6mm thick BWR Make-Century Ply/Green Ply/Kitply for seat with perforation
Back leg (Teak Wood ) left/right
Front leg (Teak Wood) left/right
Side rail (Teak Wood) left/right
Front/back rail(Teak Wood)
Wooden back strip (Teak Wood)
Stiffener (Teak Wood)
M&L for polishing old and new surface of chair wooden bottom w/o arm after repair with French polish including preparation of surface all as shown on drg and directed by Engr-in-Charge
Repair to Chair dining / CBB. M&L for repair & replacement with new ones of the following components of chair dining without disturbing the other components including tighting of frame all as specified and shown on drg :-Drg No- FD-16(M), FD-203, FD-228, FD-279
Back leg (Teak Wood) left/right
Front leg (Teak Wood) left/right
Side rail (Teak Wood) with holes for cane weaving, spacing of holes shall match with the existing rail on the other side(left/right)
Front/back rail(Teak Wood) with holes which shall match with the holes of existing rail on the other side
Back strip (Teak Wood)
Stiffener (Teak Wood)
M&L for polishing old and new surface of chair dining after repair with polish including preparation of surface all as shown on drg and directed by Engr-in-Charge
M&L for Recaning chair dinning/CBB shall be done with 2mm wide plastic cane half round and 4mm wide plastic cane half round for lining around. The canning shall be Standered pattern and as per approval of Garrison Engineer.
Repair to chair writing/chair office. M&L for repair & replacement with new ones of the following components of chair writing/chair office without disturbing the other components including tighting of frame all as specified and shown on drg :-Drg No- FD-20(M), FD-148(M), FD-271/88, FD-280
Back leg (Teak Wood) left/right
Front leg (Teak Wood) left/right
Side rail (Teak Wood) with holes for cane weaving, spacing of holes shall match with the existing rail on the other side(left/right)
Front/back rail(Teak Wood) with holes which shall match with the holes of existing rail on the other side
Back strip (Teak Wood)
Arm rest (Teak Wood)
Stiffener (Teak Wood)
M&L for polishing old and new surface of chair after repair with French polish including preparation of surface all as shown on drg and directed by Engr-in-Charge
M&L for Recaning chair writing/Chair office shall be done with 2mm wide plastic cane half round and 4mm wide plastic cane half round for lining around. The canning shall be Standered pattern and as per approval of Garrison Engineer.
Repair to Peg Table . M&L for repair and replacement with new ones of the following compents of the following Peg table without disturbing the other compents including tightening of frame all as specified drg and directed Drg No- FD-25(M), FD-236, FD-266, FD-277
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading.
Legs made of teak wood all as specified in drg.
Teak wood rail all as shown on drawing.
Stiffener (Teak Wood)
M&L for Polishing old and new surface of peg table after repair with French polish including preparation of surface all as shown on drg specified and directed.
Repair to Teapoy wooden. M&L repair and replacement with new ones of the following compents of the following Teapoy wooden without disturbing the other compents including tightening of frame all as specified and directed Drg No- FD-382.
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading all around duly polished.
Legs made of teak wood all as specified in drg.
Long rail made of teak wood all as specified in drg.
Stiffener (Teak Wood)
Teak wood short rail all as specified in drg .
M&L for Polishing old and new surface of Teapoy wooden after repair with polish including preparation of surface all as specified, shown on drg and directed.
Repair to Table Centre . M&L repair and replacement with new ones of the following compents of the following Table Centre without disturbing the other compents including tightening of frame all as specified and directed. Drg No- FD-274,FD-375, FD-235,FD-29
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading.
Legs made of teak wood all as specified in drg.
Teak wood short all as specified in drawing.
Long rail made of teak wood all as specified in drg.
Stiffener (Teak Wood)
M&L for Polishing old and new surface of table center after repair with polish including preparation of surface all as shown on drg and directed.
REPAIR TO TABLE WORK BENCH WORK SHOP . M&L for repair & replacement with new ones of the following components of table work bench work shop and steel frame with hard wood top 1500x900x760 and 1800x900x760 without disturbing the other components including tightening of frame by using sikanja all as specified & shown on drg. Drg No- FD- 301
Top made of hard wood 2nd class 25-40mm thick duly covered with all 1 mm thick GI sheet/Alluminium and top coverd with around 6 mm thick teak wood beading complete all as specified and directed.
Legs made of teak wood as per drg.
Stiffer of teak wood as per drg.
Long Rails of teak wood as per drg
Short Rails of teak wood as per drg
Removing U/S drawer and S & F new drawer unit as per FD without disturbing to other component all as directed.
M&L for Polishing old and new surface of Table work bench work shop after repair with polish including preparation of surface complete all as specified, directed and shown on drg.
REPAIR TO TABLE (3050X1220X760). M&L for repair & replacement with new ones of the following components of table with hard wood top 3050x1220x760 without disturbing the other components including tightening of frame by using sikanja all as specified & shown on drg. Drg No- FD- 290
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading.
Legs made of teak wood as per drg.
Stiffer of teak wood as per drg.
Long Rails of teak wood as per drg
Short Rails of teak wood as per drg
Hard rubber ring TOE
M&L for polishing old and new surface of Table after repair with polish/paint including preparation of surface complete all as specified, directed and shown on drg.
REPAIR TO TABLE . M&L for repair & replacement with new ones of the following components of table hard wood top 1520x860x760 without disturbing the other components including tightening of frame by using sikanja all as specified & shown on drg. Drg No- FD- 289
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading.
Legs made of teak wood as per drg.
Stiffner of teak wood as per drg.
Long Rails of teak wood as per drg
Short Rails of teak wood as per drg
M&L for Polishing old and new surface of Table after repair with polish/paint including preparation of surface complete all as specified and directed.
REPAIR TO HAT STAND WITH MIRROR (LARGE). M&L for repair & replacement with new ones of the following components of Hat Stand without disturbing the other components including tightening of frame by using sikanja all as specified, directed & shown on drg.Drg No- FD-362
Sunmica 1mm thick as approved by GE with and including 6 mm thick teak wood beading around complete all as specified and directed.
Pegs all as approved
Looking Mirror of size 300x440 of glass thickness 5.5 mm all as approved.
M&L for Polishing old and new surface of Hat Stand after repair with polish/paint including preparation of surface complete all as specified and directed.
Repair to Chair dining JCO/ORS. M&L for repair & replacement with new ones of the following components of chair dining (JCO/ORs) without disturbing the other components including tighting of frame all as specified and shown on drg :- Drg No- FD/MAP-II/05
Back leg (30x55) (Teak Wood) left/right
Front leg (30x55) (Teak Wood) left/right
Side rail (Teak Wood) left/right
Front/back rail(Teak Wood)
Back strip (45x15 out of 45x35) (Teak Wood)
Stiffner (20x25) (Teak Wood)
M&L for Polishing old and new surface of chair dining after repair with polish including preparation of surface complete all as specified, directed and shown on drg.
S&F PVC sheet 4 mm thick with holes and screwed with frame. The PVC Sheet shall be Standard pattern and as approved by GE Make : Cello/Amko
S&F Nylon Buffer of Front/back leg.
REPAIR TO SIDE BOARD. M&L for repair & replacement with new ones of the following components of side board without disturbing the other components including tighting of frame all as specified and shown on drg :- Drg No- FD- 1112, FD-372, FD-371
Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading.
New drawer unit as per FD without disturbing to other component all as directed.
New side support as per FD without disturbing to other component all as directed.
New shleves as per FD without disturbing to other component all as directed.
STO Aluminium shelf support
M&L for Polishing old and new surface of Side Board after repair with polish/paint including preparation of surface complete all as specified, directed and shown on drg.
REPAIR TO STOOL DRESSING. M&L for repair & replacement with new ones of the following components of Stool Dressing without disturbing the other components including tighting of frame all as specified and shown on drg :- Drg No- FD/E6/MAP/14, FD-374
Teak wood legs
Teak wood Top Rails
Teak wood Stiffener
New 12 mm BWR Phenol Bonded Plywood as per FD without disturbing to other component all as directed by Engineer-in-Charge.
New foam cushionof 32 density as per FD without disturbing to other component all as specified and directed. Make of foam Sleepwell/Rajfoam
M&L for polishing old and new surface of Stool Dressing after repair with polish/paint including preparation of surface complete all specified, directed and shown on drg.
REPAIR TO STOOL DRESSING. M&L for repair & replacement with new ones of the following components of Stool Dressing without disturbing the other components including tighting of frame all as specified and shown on drg :- Drg No- FD-282
Legs made of teak wood as per drg.
Top Rails of teak wood
Stiffener of teak wood
Removing U/S Plastic Cane Seat Godrej pattern. S & F new Plastic Cane Seat Godrej pattern without disturbing to other component complete all as specified and directed.
M&L for polishing old and new surface of Stool Dressing after repair with polish/paint including preparation of surface complete all as specified, directed and shown on drg.
SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .