PERIODICAL SERVICES TO CERTAIN BLDGS AT 26 ED AND CERTAIN REPAIRS TO STORM WATER DRAIN AT 26 ED AND GV CAMP BANGALORE

Amount

Material and labour for preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying two coats of white wash on wall complete all as specified and directed.

Material and labour for preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying one coats of white wash on wall complete all as specified and directed.

Material and labour for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

Materials and labour for preperation of old decoratd surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper complete all as specified & directed .

Materials and labour for preperation of old decoratd surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying two coats of oil bound distemper complete all as specified & directed .

M & L for applying two coats of Distemper with Ist quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/ ltr of approved manufactured of required shade and colour cmplete as per manufacture instructions complete all as specified & directed .

M&L for preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, trading oil and gresy spots and applying one coat of cement based paint on walls complete all as specified and as directed.

M & L for finishing walls with one coat of premium Acrelic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for prepration of old wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed .

M & L for french polishing on surfaces of wood and wood based material of any description width or girth, including cleaning and prearing the old surfaces with one or more coats complete all as specified and as directed.

M&L for preparation of old decorated ceiling surfaces including brooming down or steel wire brushing, scarping down smoke soot, module, mass and applyng one coat of oil boud destemper on ceiling complete all as specified and as directed.

M&L for Painting lines, dashes, arrows, letters, etc for one coat on roads pavements & the like exc 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed.

Taking down cement plaster on brick or stone walls of any description and in any position including raking out joints, hacking for key, scrubing down with water etc.

M&L for plastering in cement mortar 1:6, 15mm thick on fair faces of brick work as in repairs to patches and finishing the surface even and fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3, and finished even and smooth without using extra cement including taking down the plaster on ceiling complete all as specified and as directed.

M&L for applying 2mm thick wall care putty on ceiling complete all as specified and as directed.

M&L for applying 2mm thick wall care putty on wall complete all as specified and as directed.

M&L for applying three coats of white wash on walls, pillasters, cornices, etc.,on newly plastered surfaces of wall necessary preparation of surfaces all as specified and as directed.

M&L for preparing surfaces plastered or unplastered new surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing dressed stone works and pre-cast concrete articles complete all as specified and as directed.

Dismantling structural steel works including doors gates but exc framed trusses etc complete all as specified and as directed.

Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Excavation trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts, wells cesspits, manholes, pier holes etc., n.exc 10Sqm on plan and n.exc 1.5mtr in depth and getting out hard/dense soil complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 40mm graded stone aggregate in surface channel and drains complete all as specified and as directed.

M&L for Broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 40mm graded stone aggregate in foundations complete all as specified and as directed.

M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) block masonary with solid block exc 10 cm width and setting in CM 1:6 complete all as specified and as directed.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M & L for rendering in CM 1:4 ,10mm thick on fair faces of brick or concrete surfaces finished even and smooth without using extra cement mortar complete all as specified and as directed.

M & L for providing cement concrete in 1:3:6 type C1 20mm stone aggregate as in copping / flooring complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers in hard/dense soil complete all as specified and as directed.

Removing excavated material exc 1.5 km but n exc 5 km and depositing where directed complete all as specified and as directed.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises & making good complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Providing, precast cement concrete type C1 1:3:6(20mm graded aggregate) set in cement mortar 1:4 in cover slabs (for manholes), chajjas, shelves and similar articles with plain face complete all as specified and as directed.

M&L Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

ABHISHEK CONSTRUCTIONS

MAA ENGINEERING SERVICERS

m/s raghavendra kulkarni

GKR and CO