86169 SPECIAL REPAIRS TO BLDG NO. P-20 (FIRST FLOOR) AND SPECIAL REPAIRS TO BLDG NO. T-23, T-24 , T-42 AT LOWER COMMAND HOSPITAL (SC) OF AFMC UNDER GE (CENTRAL) PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, walss, aprons etc., removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured joint free tiles of 7 to 8mm thick, (square/rectangular) area of Each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for 300x600x6 to 7mm thick, coloured, glazed ceramic joint free tiles as in skirting/Dado, laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in CM 1:4 including triangular filleting on top in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of Each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

All as per Ser. item No 06.00 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on stone masonary surfaces complete all as specified and as directed..

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, Cooking platform, and other similar situations complete all as specified and as directed.

M&L for grinding, rubbing and Polishing to existing kota stone flooring/ terrazo tile/ terrazo cast in situ incld filling of joints where required upto entire satisfaction of Engineer-in-Charge and complete as directed

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed..

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and Smooth without extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

M&L for Finishing walls with Acrylic Smooth exterior paint of required hade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

Complete reomval of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for Complete removal of existing treatment of applying a three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

M&L for Complete removal of existing treatment of applying two coats of oil bond distemper over coat of primer on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (First quality) complete all as specified & directed by Engineer-in-charge.

M&L for removing old paint on wooden surfaces by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified & directed by Engineer-in-charge.

Taking down door shutter area exc 1 sqm but not exc 2 sqm each and removing to store complete all as specified and as directed.

Taking down door shutter area not exc 1 sqm each and removing to store complete all as specified and as directed.

Taking down door chowkhat or frame incl shutter area not exc 1.50 sqm Each and removing to store complete all as specified and as directed.

Taking down door chowkhat or frame incl shutter area exc 1.50 sqm and not exc 4.00 sqm complete all as specified and as directed.

Resecuring or easing & adjusting, taking down Shutters of any description not exc 1 Sqm each refixing in same opening complete all as specified and as directed.

Resecuring or easing & adjusting, taking down Shutters of any description exc 1 Sqm n exc 2 Sqm each, refixing in same opening complete all as specified and as directed..

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed..

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 30mm thick, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S & F, 30 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed..

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame incl 03 Nos 75 mm stainless steel hinges at site as per specification & drawing complete all as specified and as directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and as directed.

S&F mild steel butt hinges, medium weight, 100mm size, cold rolled complete all as specified and as directed.

S&F Aluminium handle, cast type, anodiesed of size 150 mm & fix to shutter complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm complete all as specified and as directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repairs 100 mm long mild steel but hinges medium weight cold rolled complete all as specified and as directed.

S&F in repairs 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix in repairs Extruded aluminium alloy handles, 150mm long fabricated type., anodised complete all as specified and as directed..

S&F in repairs 300 mm long Aluminium allow anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S&F in repairs stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S&F, Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium alloy handles 2 Nos of 150mm long in each door, hinges (03 Nos 100mm long), anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F mild steel 4 Lever mortice lock, vertical type of size 100mm complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe 290.Gde-E-165 complete all as specified and as directed.

M & L for two coats of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth complete all as specified and as directed.

M&L for two coats of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer incl preparation of wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge branded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed.

S & F 18 mm thick UV coated exterior grade MDF board duly edge bonded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S & F aluminium anodised Hasp and staple 75mm , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix Extruded aluminium anodised alloy handles, 100 mm long fabricated type complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, Modular bricks , straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and as directed.

M&L for AAC blocks 650mmx240mmx100mm/ 600mmx200mmx100mm for partition wall respectively, AAC blocks shall be laid using polymer modified and curing free Ready Mix Jointing mortar of joint thickness 3mm to 4mm complete all as specified and as directed..

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc. complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm bore pipe complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and as directed of the following sizes :-

15mm bore

20mm bore

25mm bore

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone masonary surfaces complete all as specified and as directed.

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc. complete all as specified and as directed..

S&F Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc. complete all as specified and as directed.

S&F Medium grade GI tubing 25 mm bore with all fittings , to walls, ceiling or laid in floors etc. complete all as specified and as directed.

Supplying and laying 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified and as directed.

Supplying and laying 20mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified and as directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and as directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe complete all as specified and as directed.

S&F in repairs for stop cock / angle cock, copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) complete connected to drain complete all as specified and as directed.

S&F in repairs plastic water closet seat cover back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and as directed.

S&F repairs Vitreous China coloured Wash Hand Basin under sunk basin, including CP Pillar tap 15mm bore, 32mm dia SS waste CP coupling, including 15mm bore CP Angle Valve conforming to Cat Part No. 40701of Jaquar or of equivalent specified here-in-after complete all as specified and as directed.

S&F in repairs PVC flushing cistern 10 ltrs capacity ISI marked incl PVC down take pipe and connection etc complete all as specified and as directed.

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook complete all as specified and as directed..

S & F in repairs fancy type chromium plated two way bib tap fancy type,cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed

S&F in repairs 32mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and as directed.

Supply and fix 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed in repairs

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F Brass Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Dismantling of cast iron RCC, AC or PVC pipe jointed in CM any dia complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access complete all as specified and as directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access complete all as specified and as directed.

S&F PVC (SWR) of 110mm dia junction single (single 'T') equal or unequal with door access complete all as specified and as directed.

S&F PVC (SWR) of 75 mm dia junction single (single 'T') equal or unequal with door access complete all as specified and as directed.

S&F PVC SWR Branch piece double (double 'Y') equal or unequal 110mm dia with door access complete all as specified and as directed.

S&F PVC SWR Branch piece double (double 'Y') equal or unequal 75mm dia with door access complete all as specified and as directed.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified and as directed..

S&F PVC (SWR) bends with access door of 75 mm dia, any radius complete all as specified and as directed.

S&F PVC (SWR) bends of 110 mm bore, any radius complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore, any radius complete all as specified and as directed.

S&F PVC (SWR) vent cowl, 100 mm bore complete all as specified and as directed.

S&F 50mm dia for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and as directed.

S&F sink made of stainless steel of 1mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm complete all as specified and as directed.

Dismantling Water Tanks & removing from site, capacity of tanks 500 ltr and not exc. 1000 ltr complete all as specified and as directed.

S&F Rotational moulded polyethelene water storage tank of 1000 Ltr capacity (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Capacity exc 500 litrs n exc1000 litrs and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F in true horizonal level 595x595x8mm false ceiling non asbestos decorative tiles including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c. Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire complete all as specified and as directed.

Supply and fix decorative type curtain rod , stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc.15 cm. complete all as specified and as directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Boarding of any description fixed in any position with nails,with or without cover fillets complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position, complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position of framed work complete all as specified and as directed.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

M&L for Clean sawn Second class hard-wood in timber un framed and fixed scantlings complete all as specified and as directed.

All as per Ser. Item No. 125.00 above but except timber complete all as specified and as directed.

M & L for IInd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exc. 15 Sqcm, fixed with nails all as directed.

Labour only II nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exc. 15 Sqcm, fixed with nails complete all as specified and as directed. (Note : Serviceable items received Dismantling to be used)

M&L for 2nd class hardwood,Plain fillets exc 13 Sqcm not exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

M&L for Preparing new surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L for Preparing old surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with, all over with one coats of creosote oil complete all as specified and as directed.

M & L for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation complete all as specified and as directed.

Fixing only for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation complete all as specified and as directed. (Note : Serviceable items received fromDismantling to be used)

M & L for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry complete all as specified and as directed.

Labour only for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable items received Dismantling to be used)

S&F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

M&L for Straight cutting and waste to square abutments, chimney stacks, verges, etc. complete all as specified and as directed.

M&L for Raking cutting and waste to hips, valleys, etc. complete all as specified and as directed.

S&F Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.

Fixing only Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. (Note : Serviceable sheets received Dismantling to be used)

S&F galvanized plain mild steel sheeting of 0.80 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 complete all as specified and as directed.

Fixing only galvanized plain mild steel sheeting obtained from dismantling in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed) with grade of zink coating 275, except sheet complete all as specified and as directed.

M&L for PCC (1:3:6) type- C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs , rounded or chamfered on edges, including necessary form work complete all as specified.

M&L for filleting in any position & to any shape, sectional area exc.25 but not exc. 50 sqcm. in CM 1:4 including all mitres, stops etc, complete all as specified.

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15cm thickness below or above ground level etc all as specified and as directed by Engineer-in-Charge.

M & L for 75 mm thick cement concrete 1:3:6, type C2, with using 40 mm graded crushed stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete as specified and directed.

Dismantling Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded crushed stone aggregate as in foundation, filling in mass concrete for manholes & drains complete all as specified and as directed.

M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded crushed stone aggregate as in benching and surface channel etc complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 Type C1 using 20mm graded crushed stone aggregate as in coping including form work etc complete all as specified and as directed.

M&L for 40mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles 25Cm x 25 Cm x 25mm thick over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified.

M&L for 300x600x6 to 7mm thick, coloured, glazed ceramic tiles as in skirting/Dado, laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in CM 1:4 including triangular filleting on top in CM 1:3 complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick in CM (1:4) on fair faces of PCC block/brick walling, using liquid water proofing admixture @ 200 ml per bag of cement and surface finished with sponge finish. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing admixture complete all as specified and directed.

Rendering 10mm thick in CM 1:6, on brick/ PCC block walling, finished even & smooth with a thin layer of sagol finish complete all as specified and as directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M&L for preparation of new plastered surface and apply two coats of oil bound distemper over 1-2 mm thick wall care putty complete all as specified and directed

S&F three track sliding window with two or more shutter with 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.56 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections confroming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F in repair figured glass pin head type, 3mm thick and glazing with oil putty in square not exc. 0.50 Sqcm in each pane complete all as specified and as directed.

S & F framed brackets of rolled steel angles or tees with web and flanges incl. bending and welding angles, as necessary, gusset plates etc. not exc 10 Kg each brackets, complete all as specified and as directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prlaminated one side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc all as directed and specified.

S & F 3mm thick glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section in un-framed work complete all as specified and directed.

M&L for 2nd class hardwood Plain fillets exc 6 and n exc 13 sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or boards as in fillets, rails, posts, rafters, purlins etc complete all as specified and as directed. (Note :- Rate of item are deemed to be inclusive of scaffolding and safety measures for work to be carried out from ground level)

S&F 0.50 thick (total coated thickness) pre-colour, pre-profiled (Galvalume / Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

Supply and fix steel hollow steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding door fixed with angle cleat or other connecting plates etc complete conforming to IS-4923-1997 of FE 410-W (Gde-E-250) quality A complete all as specified and as directed

S&F in repair PVC connection 15mm bore x 600mm long with PTMT check nuts complete all as specified and as directed.

Supply and Fix in repairs vitreous china Wash hand basin flat back, size 630x450mm white excluding pillar taps & waste pipe but including Waste coupling PTMT and fixing brackets complete all as specified and as directed.

Supply and Fix in repairs Stainless steel grating dome 125mm dia with or without waste holes as required complete all as specified and as directed.

Dismantling aluminium partition of any description complete all as specified and as directed

S&F aluminum powder coated partition Pattern approved by GE using Jindal or equivalent Catalogue Sections DP/SP weight not less than 1.0 kg/RM with and incl frosted glass 5 mm thick and 12 mm thick prelaminiated particle board (both side laminated) fixed with glazing clips, Jointing cleats, rubber gasket, neoprene packing, anodised aluminium snap beading screws complete all as specifed and directed

S&F, powder coated Aluminium grill 6.5mm thick of pattern DG 014 or equivalent surrounding by F-channel of 1.2mm thick fixed to 'Y' or 'C' section aluminium window complete all as specified and as directed.

Taking down Aluminium Door shutters of any size, carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary incld 6mm dia MS studs at top and bottom rail complete (wire mesh and glass pane shall be measured and paid separatly) and refixing the shutter in the same opening complete as directed and specified.

All as per Ser. item No 179.00 above but Aluminium window shutters of any size complete all as specified and as directed.

M&L for preparation of old decorative surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of distemper oil emulsion on ceiling complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. (Note : Credit for above items should be made as per conditions separately)

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store complete all as specified and as directed. (To be measured only when found serviceable in all respects complete for reuse)

Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified and as directed.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and as directed.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc for reusing complete and making good the disturbed surfaces including colour wash complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan/ wall fans of any sweep, keeping with safe custody, repair and rewiring if required and refixing the same with replacement of old unserviceable 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan including replacement of bearing, capacitor, rubber coupling etc, including Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Labour only for fixing point wiring of any length PVC insulated stranded copper conductor 1.5 Sqmm single core cable and connecting to common earth dolly including making good of disturbed surfaces with existing surfaces complete all as specified for the following:-

One light point controlled by one switch complete all as specified and directed.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

One 3 pin 5 amps socket outlet point on same board complete all as specified.

One fan / Exhaust point controlled by one switch complete all as specified and directed.

All as per item No. 188.00 above but with 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sq.mm single core cable for one 15 amps socket outlet point on independent board complete all as specified and as directed.

Re-Fixing Piano switch 5A SP one - way 230V white ivory finish complete all as specified and as directed.

Re-Fixing Piano switch 15A SP one - way 230V white ivory finish complete all as specified and as directed.

Re-Fixing Piano socket outlet two in one 3 pin 5 amps, flush type 230 Volts, single pole one way suitable for plug tops, complete all as specified and as directed.

Re-Fixing Piano socket outlet two in one 3 pin 15 amps, flush type 230 Volts, single pole one way suitable for plug tops, complete all as specified and as directed.

Re-Fixing 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified and as directed.

Re-Fixing ceiling rose surface type three terminals complete all as specified and directed.

Re-Fixing electronic step type fan regulator complete all as specified and directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC rigid conduits of suitable size totally concealed in walls /floors etc and accessories including Making good of disturbed surfaces to match with existing complete all as specified and as directed. [Note :- 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.]

M & L for Sub main wiring complete with four single core 4 sqmm and one core of 4 sqmm earth wire,1100volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including PVC rigid conduits and accessories including Making good of disturbed surfaces to match with existing complete all as specified and as directed. [Note :- 5 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length]

M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6 sqmm in and including PVC rigid conduits including cutting chases, pinning in, making good to facings where required complete all as directed by Engineer-in-Charge. [Note:- 5 runs of 6 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.]

Re-Fixing Only MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, complete all as specified and as directed.

Re-Fixing Only MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, complete all as specified and as directed.

Re-Fixing Only MCCB V TPN DB, double door, with 200 amp rated busbar 415 V, complete all as specified and as directed.

S&F MCB TPN DB 4 way, double door, with 200 amp rated busbar 415 V, complete all as specified and as directed.

S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, complete all as specified and as directed.

S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, complete all as specified and as directed.

S & F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and as directed.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F for MCB four pole of rated capacity 40/63 amps, 415 volts complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI-694 marked, in PVC casing caping 25mm wide heavy duty ISI marked including all accessories etc. with PVC boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly including making good of disturbed surfaces with existing complete all as specified for the following:-

One light point controlled by one switch complete all as specified and directed.

One fan point controlled by one switch complete all as specified and directed.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

One 3 pin 5 amps socket outlet point on same board complete all as specified.

One bell/buzer point controlled by one bell push complete all as specified.

One light point controlled by two way switch complete all as specified and directed.

All as per item No. 210.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sq.mm single core cable as earth and connecting to earth dolly including Making good of disturbed surfaces with the existing for one 15 amps socket outlet point on independent board complete all as specified and as directed.

S&F switch Piano 5 / 6 A SP one - way 230V complete all as specified and as directed.

S&F switch Piano 15A SP one - way 230V complete all as specified and as directed.

S&F Piano socket outlet 2/3 pin 5 amps, multipurpose 230 Volts, single pole one way suitable for plug tops, complete all as specified and as directed.

S&F Piano socket outlet 2/3 pin 15 amps, multipurpose 230 Volts, single pole one way suitable for plug tops, complete all as specified and as directed.

S&F step type electronic fan regulator complete all as specified and as directed.

S & F for Bell push, flush type, 5 amp complete all as specified and as directed.

S&F bell electrical ding dong including hard PVC board ISI marked complete all as specified and as directed.

S&F ceiling rose surface type three terminals complete all as specified and as directed.

S&F switch Piano 5A SP Two 2-way 230V complete all as specified and as directed.

Supply and fix in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Ultra bright LED Polycarbonate Tube-light with very high efficiency provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete all as specified.

S & F in replacement of round recessed mounted AL die - cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15W LED downlighter of white/neutral white color temperature etc, prewired and all accessories complete all as specified and directed

S&F in replacement of LED light fitting surface and wall mounted LED batten with Aluminium housing & integrated electronic driver complete in all respect of 10W cap complete all as specified.

S&F LED security light in replacement of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired Complete all as specified.

Labour only for removing/reinstallation of split type AC 1.5/2TR cap, indoor & outdoor unit including all allied work such as bending, shaping, brazing to copper tubing & insulation to tubing, connection of water drain piping & fixing it properly, etc including testing & commissioning complete.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Supply and fix new generation, post top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution span aluminium landscape luminaire with high power LEDs as light source of cap 25 watts IP 65 protection including taking down old us light fitting.

S & F in replacement of LED light fittings 2'x2' of capacity 28 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements complete all as specified.

M & L for servicing of geyser of 1.5/2 KW capacity, cleaning, overhauling, replacement of heating element including other US parts like thermostat etc, spray painting with one coat of synthetic enamel paint including writing MES No and refixing the geyser all as specified.

Supply & Fix down rod 4'/6' long complete all as specified and as directed.

GS Associates

SARATH ENTERPRISES

REKHA ELECTRICALS

M/s.BAJRANG CONSTRUCTION