Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.2 LAdmitted-Finance | -3.10% | ₹1.2 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical BALAJI NAGAR UBASI BALAJI NAGAR UBASI JAYAL NAGAUR BALAJI NAGAR NAGAUR RAJASTHAN 341030 | NAGAUR | RAJASTHAN | 341030 | - | - | - | Rejected-Technical Challan Not TO be Sumitted as per BOQ |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Jul 2026, 6:00 pmClosed
EE PHED DN KHANDELA
EE PHED DN KHANDELA
Single phase Tube well construction and commissing work under dn khandela
2026_PHCJA_570901_1
15/2026-27
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Percentage
365 days
KHANDELA
refer to TD
2 documents required · 2 mandatory
₹1,000
ee phed dn khandela
₹90,000
Yes
23 Jul 2026
24 Jun 2026
2 Jul 2026
24 Jun 2026
1 Jul 2026
24 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water. | - | - | - | - |
| 2 | Nominal bore 150 mm dia. | 1 | mtr | 842.37 | ₹842.37 |
| 3 | Add 15% extra on above item (Item no 2.1.1 to 2.1.3) for drilling depth beyond 100 mtr and up to 200 mtr, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. | 1 | mtr | 968.73 | ₹968.73 |
| 4 | Construction of tube well after completion of drilling by rotary /percussion method & upto 100 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | - | - | - | - |
| 5 | Nominal bore 150 mm dia. | 1 | mtr | 740.68 | ₹740.68 |
| 6 | Add 15% extra on above item (Item No 2.3.1 to 2.3.3) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. | 1 | mtr | 851.78 | ₹851.78 |
| 7 | Add 30% extra on above item (Item No 2.3.1 to 2.3.3) for drilling depth beyond 200 mtr and from ground level, rate shall be applicable for only extra depth beyond 200 mtr . | 1 | mtr | 962.88 | ₹962.88 |
| 8 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes
150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) | 1 | mtr | 1,638.14 | ₹1,638.14 |
| 9 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 150 mm dia. | 1 | Each | 688.14 | ₹688.14 |
| 10 | Providing & laying ISI marked GI Pipe Light duty ( “A” class) as per IS: 1239 for casing pipe for submersible cable external work 40 mm dia complete in all respect. | 6 | mtr | 321.29 | ₹1,927.74 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
TD15.pdf
Tender Documents • 15.92 MB
BOQ_1015812.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .