Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹60.8 LAccepted-AOC | 1 | Accepted-AOC The bidder quoted value less than put to tender value | |
| 2 | 2₹61.7 L+₹93,375 (1.54%)Rejected-Finance | 2 | Rejected-Finance bidder quoted value higher than put to tender value |
Tender Value
₹60.9 L
EMD Value
₹40,500
Closing Date
17 Aug 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive officer
A/m Thirunageshwara Swamy temple,thirunageshwaram,kundrathur Taluk,Kanchipuram District
Construction of New Annadhanakudam
2023_HRCE_351840_1
33371/2022/Q1
Open Tender
Civil Works - Buildings
Lump-sum
180 days
A/m Thirunageshwara Swamy temple, thirunageshwaram
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹40,500
Yes
29 Mar 2024
1 Aug 2023
17 Aug 2023
1 Aug 2023
17 Aug 2023
1 Aug 2023
Amount
Earthwork excavation for foundation in all soils except hard rock requiring blasting to a full depth with initial lead of 10 m and lift of 2m etc., complete (SS 20B)
Supplying and filling in foundation and basement with filling sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.
Supplying and filling in foundation and basement with stone dust in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.
Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed.A)Roof slab and Beams
Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed B)For Column
Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed C)Curved centeing for kodungai
Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed D)Circular Surface
Providing and laying position,Standardised concrete mi M-20 Grade in accordance with IS :456-2000,using 20mm and down graded hard brocken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55,inculding admiture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of sand ,but eculding cost of reinforcement grill and fabricating charges,centering and shuttering and also inculding laying, vibrating with mechanical vibrtors,finishing,curing,etc,complete complying with standred specification and ass directed by the departmentel officers.the coarse and fine aggregates to be used shoul comply with the requirments of IS standreds.(No separate payment will be made by the Department for the ecess usage of materials.) A) For Foundation
Providing and laying position,Standardised concrete mi M-20 Grade in accordance with IS :456-2000,using 20mm and down graded hard brocken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55,inculding admiture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of sand ,but eculding cost of reinforcement grill and fabricating charges,centering and shuttering and also inculding laying, vibrating with mechanical vibrtors,finishing,curing,etc,complete complying with standred specification and ass directed by the departmentel officers.the coarse and fine aggregates to be used shoul comply with the requirments of IS standreds.(No separate payment will be made by the Department for the ecess usage of materials.) B) For Superstructure:- (Above Basement level up to 3.60m height)
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Brick work in CM 1:5 (One Cement and five Sand) using country brick of size 83/4"x41/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification. A) Foundation & Basement
Brick work in CM 1:6 (One Cement and six Sand) using country brick of size 83/4"x41/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification. B) Ground floor
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Plastering with Cement Mortar 1:5 (One cement and Five Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc, complete with standard specifications.
Finishing the Top of Roof with One course of machine Pressed Tiles 200 x 200 x 20mm in C.M.1 : 3 - 12mm thick mixed with Water Proofing Compound,Red oxide and pointing with same mortar etc.,
Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Paving the floor with concrete anti-skid tiles to Required shape and design of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Providing & fixing rain water down fall pipes of 110mm dia pvc pipes 4Kg/Sqcm with necessary shoes bends clamps screws nails etc complete with standard specifications.
Supplying and fixing of Teak wood frames including Labour wrought and put upt as per standard specifications.
Supplying and fixing of Flush door shutter Single leaf in position using 35mm thick solid core Flush shutters with commercial ply on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.
UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
Supplying and fixing mild steel grill for windows / Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.
White washing two coats with best shall lime including cost and conveyance of all materials and all labour charges etc. complete complying with standard specifications.
Painting two coats of newly plastered wall surface with Water based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Best varnish two coats for wood works etc, complete complying with standard specifications.
Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the zinc chloride in all floor etc, complete complying with standard specifications.
Dadooing walls with Glazed tiles of sizes 300 X 450 X 6mm size of approved make and quality and color lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
Supply and fixing the stainless steel sink of size 1200x550x180mm
Providing granolithic floor finish 40 mm thick with cc1:2;4 10to 12mm metal including cost of all materials and labor charges for laying rubbing the top surface for smooth etc., complete complying with standard specifications.
Supplying and fixing Cuddapah slabs of the 38/40mm thickness over a Brick partion walls for cubboard and pointed with cement mortar 1:3 ( one cement and three sand) complying with standard specification.
Supply and Filling 40MM HBGS jelly including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.
Supply and Filling 20MM HBGS jelly including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.
Brick masonry in C.M 1:4, using stock bricks including all vaarivargams, moulds, sthambams, mukhapathramsa, koodu, nasi and all ornamental birck work complete, all pancharams, agarais, karnrakoodus, etc., forming core wlls of Rajagopurams/vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required hts curing and all extra for working in hts etc., complete
Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Cement Mortar1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Cement Mortar1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram
Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in CM 1:3 finishing the same with CM 1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) 1" upto 2'6"
Supplying laying and jointing U.P.V.C pipes of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (i) 32mm UPVC
Supplying laying and jointing U.P.V.C pipes of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height (ii) 25mm UPVC
Supplying laying and jointing U.P.V.C pipes of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height (iii) 20mm UPVC
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (i) 32mm UPVC Union
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (ii) 32mm UPVC Bend
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iii) 32mm UPVC Tee
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iv) 32mm UPVC Coupling
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (v) 32mm UPVC Ball Valve
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (i) 25mm UPVC Union
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (ii) 25mm UPVC Bend
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iii) 25mm UPVC Tee
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iv) 25mm UPVC Coupling
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (v) 25mm UPVC Ball Valve
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (i) 20mm UPVC Union
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (ii) 20mm UPVC Bend
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iii) 20mm UPVC Tee
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (iv) 20mm UPVC Coupling
Supplying laying and jointing U.P.V.C Specials of approved quality and best variety conforming to I.S.S and with I.S.I mark, of the following sizes including cutting and fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Above ground level upto 4 m height. (v) 20mm UPVC Ball Valve
Supplying and fixing of Brass Chromium Plated screw down tap heavy tyoe 20mm dia of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary (Taps should be got approved by the executive Engineer before use on the work.
Supplying and Fixing PVC water tank of approved quality and good variety of 1000lt Capacity including Lid and fixing in Position etc., complete with standard specifications.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 110V grade in suitable PVC rigid pipe concealed in wall with metal with pVC accessories in flush with wall with metal box and 6A 1way modular switch in flush with wall with suitable modular front place cover for making good of the concealed portion for PVC concealed light point / fan point (modular metal flush box, modular switch, cover plates should ve Anxhor roma / equivalent) (5points per coil) (DATA A)
Supply and fixing of 3 nos. 6 Amps (3pin and 2 pin) combined flush type modular wall socket 3 nos. 6 Amps on wal switch flush type swich withfront cover plate concealed in suitable metal box covered with modular cover plate in flush with wall with earth connection (for computer plug set) (modular metal box, modular switch, cover plate should be Anchor roma / equivalent) (DATA B)
Supply and run of 2 of 4 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 110V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD 57)
Supply andfixing of single boxtype 4' 20W LED tube light fittings complete with TW round blockson wall or ceiling with 20 W LED tube light with single side connection with pVC insheathed copper leads from terminals to the fittings (Philips make)(DATA C)
Suppy and fixing of 30 watts LED street light fitting with LED complete set with 32mm dia (GI Pipe) class 'B' with 1 no. 32mm GI Bpard complete on the wall with pVC unsheathed copper leads from terminals to the settings with MS clamp and aluminium paintings (Philips / Havells) (DATA D)
Supply and fixing of 1200mm (48") Acceiling fan complete with stepped electronic 100W regulator (2 module) with 300m down rod including supply and fixingof box type fan clamp.(DATA E)
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 10 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) (SD 167)
Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP43 protection with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) (SD 179)
Supply and laying of 31/2 x 25 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 204)
Supply and fixing of brass cable gland 31/2 x 25 sq.mm PVC LTUG aluminium armoured cable with earth connection. (SD 186)
Supply and clamping of 31/2 x 25 sq.mm PVC LTUG aluminium armoured cable on post or wall with MS clamp. (SD 222)
Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 129)
supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD 59)
Supply and providing cable end termination of 31/2 x 25 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by criming etc..., with electrical connection complete. (SD 239)
Earthing as per PWD standard with an earth electrode of 2 mtrs. Class 'B' G.I pipe of dia not less than 32mm complete with necessary masonry work. (SD 232)
Supply and fixing of 6 module flush mounting metal box with 1 no. 6 module cover and plate with 2 nos. 20 A one way switch (1 module), 2 noss. 20A 3 pin socket (2 module) in flush with wall with earth connection (make Anchr roma) (DATA F)
Supply andfixing at 45mm (18") sweep heavy duty A.C exhaust fan complete with necessary wall opening and making good to the wall (DAT G)
Supply and run of 4 x 6 sq.mm PVCinsulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good to the concealed portion with suitable colour. (DATA H)
Provision of three plase E.B. services. TNEB Service connection
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow eter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install theSystem in position and intac 250 Liter
Sub Total
P.BASKARAN&CO
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_419592.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .