Construction installation of MS gate on the existing boundary wall towards backside of new boys hotel including P and Fixing of openable aluminium windows in new boys hostel civil work

Amount

Earth work in excavation in all kinds of soil in foundation trenches pits and bulk evacuation including stacking soil neatly away from the edges, filling back by the sides of foundations in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside the University Campus.

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 grade crushed stone aggregate 40mm nominal sizes) in foundation and under flooring including machine mixing, finishing, consolidation, curing and form work complete.

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 grade crushed stone aggregate 20mm nominal sizes) in foundation and plinth including machine mixing, finishing, consolidation, curing and form work etc. complete.

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in superstructure including cost of scaffolding, curing etc. complete. In Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying and fixing of steel work welded in built up sections/framed work including cutting, hoisting, making holes in angle iron/flats or fixing of chain link fencing including applying a priming coat of approved steel primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac) (M.S angle posts struts and flats of required size).

10-15 mm cement plaster on the rough/fair side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand) including scaffolding/formwork etc. complete. All work upto floor V level.

Providing and fixing of rotatable closing arrangement for M.S gates, welding etc. complete.

Supplying & fixing of Concertina coil fencing 610 mm dia (having 15 Nos. round per six meter length) including straining and fixing to angle posts including securing with and provision of galvanized mild steel wire, staples of steel pins etc. as directed by the Engineer-in-charge.

Finishing walls with water proofing cement paint of required shade. New Work (two or more coats) applied @ 3.84 Kg./10 sqm including applying a priming coat of cement primer applied @ 0.80 ltr./10 sqm.

Painting with ready mixed synthetic enamal paint of approved brand and manufacture in all shades to give an even shade. 1 New Steel work (two or more coats).

Providing and fixing powder coated aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z Sections and other sections of approved make conforming to IS:1285, fixed with rawl plugs and screws or with fixing chips or with expansion hold fasterners including necessary filling up of gaps at junctions at top bottom and sides with required PVC/Neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P brass/stainless steel screws all complete including providing and fixing 12 mm thick prelaminated 3 layer medium density (exterior grade) particle board Grade-II conforming to IS:12823 bounded with phenol formaldehyde synthetic resins and providing and fixing of glazing in aluminum doors, windows, ventilators and partition etc. for doors with float glass panes of 5 mm thick (not less than 13.75 kg/sqm) Make SAINT GOBAIN/MODIFLOAT) including providing and fixing of hinges/pivots, handles, tower bolts, eye hooks/window stays, grills (10 gauge) etc. including the cost of PVC/neoprene gaskets as required.

M/S RAVINDER KUMAR CONTRACTOR

SHSM INFRABUILD PRIVATE LIMTED