Certain repair to ACP sheet, floor, plaster, ceiling, joinery, PVC water tank and misc B/R works at Zone A area at Old Cantt Allahabad.

Amount

Demolition of Cement Concrete work [Un-reinforced] in ground floors or paving not exceeding 15 cm thickness and removing rubbish from site as directed by Engineer-in-Charge.

Demolition of brick work built in cement & sand mortar including all quoin, arches, pillars etc & removing rubbish from site complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid on vertical surface of walls like skirting / dado or riser to steps etc; set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering or bedding layer in cement sand mortar in 1:4 for bedding of tiles complete all as specified & directed.

Material & Labour for Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx7mmm or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Material & Labour for Vitrified digital double charge tiles 600x600x8-10 mm thick (square or rectangular) polished in floors set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white cement mixed with colouring pigment to match the shade or colour of tiles laid over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified & directed. Make : Marbonite [series-2] of M/s H R Johnsons or equivalant make aas approved by GE.

Material & Labour for Vitrified digital double charge tiles 600x600x8-10 mm thick (square or rectangular) polished in vertical surface like skirting / dado or risers of steps set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white cement mixed with colouring pigment to match the shade or colour of tiles laid over and including 10mm thick rendering or bedding layer with CM 1:4 complete all as specified & directed. Make : Marbonite [series-2] of M/s H R Johnsons or equivalant make aas approved by GE.

Material & Labour 18-20mm thick machine cut marble [Baroda Green / Udaipur Green] with granite polish stone slab as in kitchen shelf or cooking platform, laid over and including cement screed bed or base 20mm thick in CM 1:6 laid and jointed with cement slurry mixed with colouring pigment to match the colour or shade of the slab including rounding outer edges of stone half round by grinding machine complete all as specified & directed.

Material & Labour 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in sub base to floor or base of floor, surface finished even & fair for base of tiles or as leveling course complete all as specified & directed.

Material & Labour for brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed.

Material & Labour for brick work with old size bricks [Except bricks] old bricks shall be used obtain from demolition straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even and fair without using extra cement complete all as specified & directed.

Material & Labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:4, finished surface even and fair without using extra cement complete all as specified & directed.

Material & Labour for 10 mm thick rendering on ceillings surfaces in cement sand mortar 1:4, finished surface even and fair without using extra cement complete all as specified & directed.

Material & Labour for cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs, coping, benching, mud stops or chamfered edges or similar works including necessary form work if required complete all as specified & directed.

Taking out old rusted or damaged 15 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Taking out old rusted or damaged 20 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Supply & Fixing 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 15 mm bore galvanised steel water tubing [Except pipe] for water supply pipes & connections with all new fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing [Except pipe] for water supply pipes & connections with all new fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & fixing in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density PVC float valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density PVC float valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair 20 mm bore gun metal gate valve with iron wheel head screwed both ends complete all as specified & directed.

Supply & Fixing in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed complete all as specified & directed.

Supply & Fixing in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified & as directed.

Supply & Fixing in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified & as directed.

Supply & Fixing in repair 110 mm bore PVC (SWR) bends ISI marked with oval & accessed door of any radius jointed with cement solvent or adhesive complete all as specified & as directed.

Supply & Fixing in repair 75 mm bore PVC (SWR) bends ISI marked with oval & accessed door of any radius jointed with cement solvent or adhesive complete all as specified & as directed.

Supply & Fixing in repair PVC (SWR) 110 mm bore single juncton (Single'T') equal or un equal jointed with cement solvent or adhesive complete all as specified & directed.

Supply & Fixing in repair PVC (SWR) 110 mm bore single juncton (Single'T') equal or un equal jointed with cement solvent or adhesive complete all as specified & directed.

Supply & Fixing in repair PVC (SWR) floor trap with steel grating 75 mm dia including jointing with solvent cement or adhesive complete all as directed.

Supply & Fixing in repair 6 mm thick Looking mirror designer ornamental type including iteching, earving and moulded mounted on 12mm thick wooden frame fabricatede withg teak wood beads and polishing frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.

Supply & Fixing in repair sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 120mm wide with & 600 mm long chromium plated bracket guard nad railing fixed with steel screws on wall complete all as specified & as directed.

Supply & Fixing in repair sink with drainage board made of stainless steel 1 mm thick steel sheet with plugs, washer, waste pipe 40 mm bore 600 mm long or CP waste coupling 40 mm bore, rest on mild steel brackets or on dwarf wall overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.

Supply & Fixing in repair 600 mm long 20 mm dia "D" type chromium plated tubular towel rail between flanges fixed with steel screws complete all as specified & directed.

Supply & Fixing in repair 15 mm bore Angle Valves brass chromium plated fancy type screwed down high pressure with capstan head handle screwed two ends for iron pipe or for unions complete all as specified & directed.

Supply & Fixing in repair 15mm bore stop valves fancy type Chromium plated (concealled type) cast copper alloy screwed down high pressure with capstan headed handles screwed both ends for iron pipe or for union complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Material & Labour 110 mm round steel chromium plated with or without centre hole grating fixed with adhesive or cementy solvant complete all as specified & directed.

Supply & Fixing in repair 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed.

Supply & Fixing in repair chromium plated shower rose fancy type with swivel joints fixed to 15mm bore pipe complete all as specified & as directed.

Supply & Fixing in repair 10 litre capacity PVC valveless syphonic action type low level flushing cistern white colour including 32 mm bore flush pipe 600 mm long, cantilever brackets PVC ball valve, float and PVC handle, PVC connection 15mm dia 450 mm long complete all as specified & directed.

Supply & Fixing in repair PVC connection 15mm dia with PTMT nuts of length 450mm complete as specified & directed.

Supply & Fixing in repair vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rests (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor complete all as specified & as directed by Engineer-in-charge.

Supply & Fixing in repair vitreous china bowl type urinal flat back white colour of size 465x355x265 mm with & including 32-40 mm CP waste coupling, PVC flexible discharge / waste pipe socketed end including connection to flushing pipes and out going pipes & including fixing plugs, securing & bedding urinal in walls in cement sand mortar complete all as specified & directed.

Supply & Fixing in repair vitreous china wash hand basin white flat back of size 550x400mm excluding chain & plug and porcelain stopper but including brackets, PVC waste pipe 32 mm bore 600mm long, chromium plated waste coupling 32 mm dia long shank complete as specified & directed.

Supply & Fixing in repair in position vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making necessary connection to drain or out going pipe complete all as specified & directed.

Supply only water closet plastic seat cover closed patteren with flat bottom and cover with steel pin hinging device and fixed on EWC complete all as specified & directed.

Supply & Fixing in repair vitreous china counter top wash basin oval type of size 560x410mm with chromium palted waste coupling long shank but including brackets, PVC waste pipe 32 mm bore 600mm long complete as specified & directed. Make : Hindware cat part No. 10017 or as equivalant model in Cera or Parryware as approved by GE.

Supply & Fixing in repair vitreous china one peice water closed of size 680x370x740 mm and making necessary connection to drain or out going pipe fixed on floor complete all as specified & directed. Make : Hindware cat part No. Flair-92505 (S-20) or as equivalant model in Cera or Parryware as approved by GE.

Supply & Fixing in repair vitreous china urinal flat back of size 590x390x375 mm with & including chromium plated waste coupling long shank, PVC flexible discharge / waste pipe socketed end including connection to flushing pipes and out going pipes & including fixing plugs complete as specified & directed. Make : Hindware cat part No. 60002 or as equivalant model in Cera or Parryware as approved by GE.

Supply & Fixing in repair 15mm bore Pillar tap fancy type swan neck type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. ORM-10001 or as equivalant model in Marc as approved by GE.

Supply & Fixing in repair 15mm bore central hole basin mixture with popup waste chromium plated screwed down for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. CQT-23169B or as equivalant model in Marc as approved by GE.

Supply & Fixing in repair 15mm bore wall mixture with telephonic shower arrangement chromium plated screwed down for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. FLR-5217N or as equivalant model in Marc as approved by GE.

Supply & Fixing in repair 15mm bore bib taps with wall flange chromium plated screwed down for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. ORM-10037 or as equivalant model in Marc as approved by GE.

Supply & Fixing in repair 15mm bore bib taps two way with wall flange chromium plated screwed down for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. ORM-10041 or as equivalant model in Marc as approved by GE.

Supply & Fixing in repair 15mm bore Angle stop cock with wall flange chromium plated screwed down for galvanised iron pipes complete as specified & directed. Make : Jaquar cat part No. ORM-10053 or as equivalant model in Marc as approved by GE.

Supply & Fixing aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & as directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4.0 Sqm each & removing from site complete all as specified & directed.

Taking down door shutters of any description area exceeding 1.0 Sqm and not exceeding 2.0 Sqm each and removing from site complete all as specified & directed.

Material & Labour for PCC 1:3:6 type C-1 using 20mm crushed stone aggregate as in fixing of hold fast including necessary form work finished surface even & fair complete all as specified & directed.

Supply & Fixing rolled mild steel section conforming to Grade Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames / chowkats or cooler stands, fixed with angle iron, cleats and connecting plates etc including necessary cutting bending welding if required complete all as specified & directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed.

Material & Labour for 30 mm thick Factory made PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed.

Supply & Fixing 35 mm thick second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass / gauge etc divided into squares or rectangluar with plain, chamfered or rounded mitered edge beads for securing glass/ gauge complete all as specified in SSR Part 1-1991 section 8 clause 8.24 (a) complete all as specified & directed.

Supply & Fixing 32 mm thick flush door shutters, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed.

Supply & Fixing 100mm long mild steel butt hinges medium weight cold rolled with steel pin hinge and fixed with steel screws complete all as specified & directed.

Supply & Fixing 100mm long butt hinges extruded aluminium alloy with steel hinge pin anodised type B-11 and fixed with steel screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodised alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & as directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with out glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair steel ventilator factory made with top hung shutter including hinges with steel handle, steel peg stay, dovetailed or welded joint complete all as specified & directed.

Supply & fixing in repair door closer hydraulically regulated designation No-3, universal type, suitable for door shutters of weight between 61 Kg to 80 Kg of aluminium (Die cast) body complete all as specified & directed.

Taking down aluminium door or window shutters fron frame area exceeding 1.0 Sqm & not exceeding 2.0 Sqm each and re-fixing in same opening after repair of parts such as clip, easing, rubber beads, including replacement of middle rail, top rail and handles & locking arrangement for smooth functioning complete as specified & directed. Note : Quoted rate inclusive with replacement of any parts for required for smooth functioning and not any claim entertained on this account.

Supply & fixing in repair mortice Lock Four Lever vertical type of size 75 mm with all fittings for fixing in aluminium door complete all as specified & directed.

Supply & fixing in repair double action floor door spring hydraulically regulated made with minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium door frame with shutter having with door frame of section 62.5x37x1.5 mm thick & shutter with bottom & middle rail of section 112.5x37x1.5 mm thick and styles & top rail of section 83x37x1.5 mm thick with central locking arrangement with & including mortice handle lock of make of Godrej or Link having seven lever and self closing device [Floor door spring by cutting of floor of Sandhu make] with rebate including jointing cleats, fixing builder hardware fittings and glazing with 5.5 mm thick ordinary plain glass including aluminium snap beading & rubber packing and necessary fittings, fixtures complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium window [Sliding type], frame of aluminium section 62.5x37x1.5 mm thick & shutter having styles & rails of section 44.45x44.45x1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, steel screws, aluminium anodised fitings such as 100 mm buttt hinges, 150 mm tower bolt, 150 mm handle including 5.5 mm thick ordinary plain glass including providing & fixing aluminium checquered grill of anodised section of size 100x100 [diagonally] of 8 mm dia die cast fixed to frame 20x20x5 mm aluminium flat with screws and also including stainless steel wire cloth of 0.36 mm nominal dia of wire and average aparture 1.4 mm complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium partition frame work of section 62.5x37x1.5 mm thick with bottom & middle rail of section 62.5x37x1.5 mm thick and styles & top rail of section 62.5x37x1.5 mm thick including jointing cleats, filled up with 12 mm thick pre-laminated particle board interior grade up to middle rail from bottom and 5-6 mm thick plain or frosted glass in balance portion secured with alluminium fillet of size 20 mm including necessary fiitings & fixtures complete all as specified & directed.

Supply & Fixing in repair aluminium grill with aluminium powder coated mesh of size 75x75mm with square solid tubes 6 mm thick sheets complete all as specified & directed.

Supply & Fixing in repair ACP panel as in wall panelling or cladding 3 mm thick of required colour fixed on mild steel framing or grild of specified spacing fixed on face of walls or coloumn by drilling hole with secrw & joints of panels shall be sealed with silicon tape as per manufacturer Instructions complete all as specified & directed.

Supply & Fixing in repair suspended false ceiling using E-boad of Make : Everest or equivalent make approved design "Lake & Hill" of size of grid 605mm x 605mm x 4 mm thick white pre-laminated self embosed, texture designed board, water resistant, fire resistant & termite resistant for Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24 mm wide T section powder coated, the frame work shall comprises of main runner made with 0.35 mm thick GS sheet and of size 24x32x300mm spaced at 1200 mm maximum centre to centre fixed to structral soffits with hangers of 4 mm dia GI wire to be fixed with rawl plugs, adjusted with screws, flush fittings of 1200 mm long cross Tee with double stiching to be interlocked between main runners at 600 mm c/c from cross Tee more than 600 mm to be suported independently and double to be formed by fittings 600 mm long cross tee centrally between the 1200 mm cross tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour including making hole in board for provison of light fittings complete all as per manufacturer Instructions & as directed.

Supply & Fixing in repair plain galvanised 0.63 mm thick mild steel sheets used as in ridge, hips, valley and gutters or drip and straight flashing, length and girth fixed with "L" or "J" hooks and similar work complete all as specified & directed.

Material & labour in repair for mild steel framed work such as grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts & similar work complete all as specified & directed.

Supply & Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples complete as specified & directed.

Supply & Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples complete as specified & directed.

Supply & Fixing 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exceeding 0.5 Sqm each pane complete all as specified & as directed.

Supply & Fixing 3mm thick sheet glass frosted at one side and other plain sheet glass ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sqm in each pane complete as specified & directed.

Supply & Fixing in repair 25 mm dia fancy type draphery or curtain rods PVC coating with ends brackets decorative type cut to length as required size, colour coating including matching socketed brackets with PVC rings [eight numbers in each RM] complete all as specified & as directed.

Material & Labour for preperation of new wood or wooden based surface with sand or emery paper of any description over 10 CM width or girth applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Material & Labour for preparation the base of new plastered surface of walls by applying 1 mm thick Birla or JK wall care putty to wall surface and rubbing with sand or emery paper of required size to achive smooth surfacre of wall and than apply two coats of oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls and rubbing with sand or emery paper and than apply two coats of cement base paint on wall surfaces of approved colour complete all as specified & directed.

Material & labour for three coats of white wash on newly plastered surface of ceilling after preparation of new plastered surface complete all as specified & directed.

M/S Garg Sons

M/S A P CONSTRUCTION

Ram Babu Bros