Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAdmitted-Finance | ₹15.6 L | L1 | Admitted-Finance |
| 2 | L2₹17.1 LAdmitted-Finance | ₹17.1 L | L2 | Admitted-Finance |
| 3 | L3₹17.9 LAdmitted-Finance | ₹17.9 L | L3 | Admitted-Finance |
| 4 | L4₹18.3 LAdmitted-Finance | ₹18.3 L | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not Qualified |
| Sl No | Description | Qty | Unit | SUDAM JOSHI L4 | RAHIM UDDIN KHAN L2 | Sumit Sharma L1 | KHAGENDRA HOJAI L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | 8.43 | Cum | 2,040.32 ₹17,203.98 | 2,500 ₹21,080 | 1,800 ₹15,177.60 | 1,748 ₹14,739.14 |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.3: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 9.68 | Cum | 6,330.25 ₹61,283.15 | 5,000 ₹48,405 | 6,000 ₹58,086 | 5,893 ₹57,050.13 |
| 3.00 | 15 mm cement plaster on rough side of single or half brick wall finishe with a floating coat of neat cement of mix : 13.8.2 1:4 (1 cement: 4 fine sand) | 389.81 | Sqm | 385 ₹1.5 L | 400 ₹1.6 L | 350 ₹1.4 L | 343 ₹1.3 L |
| 4.00 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% a conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles MatVAntiskid finish of size. 11.41A.3.2 Size of Tile 600 x 1200 mm | 108.9 | Sqm | 1,213.14 ₹1.3 L | 500 ₹54,450 | 1,450 ₹1.6 L | 1,291 ₹1.4 L |
| 5.00 | 15.37 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead | 45 | Sqm | 54.9 ₹2,470.50 | 400 ₹18,000 | 50 ₹2,250 | 47 ₹2,115 |
| 6.00 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fstener shall be paid for separately). 9.1.3 Kiln seasoned and chemically treated hollock wood. | 0.08 | Cum | 70,457.36 ₹5,707.05 | 2,000 ₹162 | 70,200 ₹5,686.20 | 59,881 ₹4,850.36 |
| 7.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws | 6 | Sqm | 2,542.84 ₹15,257.04 | 3,200 ₹19,200 | 2,900 ₹17,400 | 2,495 ₹14,970 |
| 8.00 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | 0.9 | Sqm | 762.18 ₹685.96 | 6,800 ₹6,120 | 700 ₹630 | 646 ₹581.40 |
| 9.00 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.2 200x10 mm | 12 | Each | 300.63 ₹3,607.56 | 190 ₹2,280 | 250 ₹3,000 | 257 ₹3,084 |
| 10.00 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete | 25 | Each | 246.99 ₹6,174.75 | 400 ₹10,000 | 250 ₹6,250 | 218 ₹5,450 |
Tender Value
₹19.7 L
EMD Value
₹39,500
Closing Date
24 Mar 2026, 5:00 pmClosed
As per Bid
As per Bid
Repair and Maintenance of NEEPCO Health Centre KHPS NEEPCO Ltd
2026_NEEPC_268673_1
NEEPCO KHPS CnP NIT 514 date 25.02.2026
Open Tender
Civil Works
60 days
As per Bid
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Yes
As per Bid
₹39,500
Yes
23 May 2026
25 Feb 2026
26 Mar 2026
26 Feb 2026
24 Mar 2026
27 Feb 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: Sr. Manager (E/M) i/c C&P KHPS
Name of Work: Repair and Maintenance of NEEPCO Health Centre, KHPS, NEEPCO Ltd. Umrangso, Assam.
Contract No: NIT NO. KHPS/C&P/2026-26/514 Dt. 25.02.2026
Name of the Bidder/ Bidding Firm / Company :
Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures (excluding GST) To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category
1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 0.000 Cum Excess(+) Full Conversion INR
2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.3: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 0.999 Cum Excess(+) Full Conversion INR
3 15 mm cement plaster on rough side of single or half brick wall finishe with a floating coat of neat cement of mix : 13.8.2 1:4 (1 cement: 4 fine sand) 0.000 Sqm Excess(+) Full Conversion INR
4 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% a conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles MatVAntiskid finish of size. 11.41A.3.2 Size of Tile 600 x 1200 mm 0.000 Sqm Excess(+) Full Conversion INR
5 15.37 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead 0.000 Sqm Excess(+) Full Conversion INR
6 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fstener shall be paid for separately). 9.1.3 Kiln seasoned and chemically treated hollock wood. 0.999 Cum Excess(+) Full Conversion INR
7 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws 0.000 Sqm Excess(+) Full Conversion INR
8 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 0.000 Sqm Excess(+) Full Conversion INR
9 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.2 200x10 mm 0.000 Each Excess(+) Full Conversion INR
10 Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 0.000 Each Excess(+) Full Conversion INR
11 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled devic (handle lever), conforming to IS : 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 0.000 Each Excess(+) Full Conversion INR
12 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. 14.80.2 Orissa pattern W.C Pan of size 580x440 mm 0.000 Each Excess(+) Full Conversion INR
13 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 0.000 Each Excess(+) Full Conversion INR
14 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : 17.11.2 Size 600x450x200 mm 0.000 Each Excess(+) Full Conversion INR
15 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 0.000 Each Excess(+) Full Conversion INR
16 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 0.000 Each Excess(+) Full Conversion INR
17 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.2 Rectangular shape 453x357 mm 0.000 Each Excess(+) Full Conversion INR
18 18.65 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. 0.000 Each Excess(+) Full Conversion INR
19 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 63mm dia. 0.000 Each Excess(+) Full Conversion INR
20 Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (iv) 75 mm dia. 0.000 Each Excess(+) Full Conversion INR
21 Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia. 0.000 Each Excess(+) Full Conversion INR
22 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(v) 63mm dia. PVC cowel of ISI make 0.000 Each Excess(+) Full Conversion INR
23 Providing and fixing P.V.C. waste pipe for sink or wash basin including. P.V.C. waste fittings complete. 17.28.2 Flexible pipe. 17.28.2.2 40 mm dia 0.000 Each Excess(+) Full Conversion INR
24 14.9 : Renewal of old putty of glass panes (Length) 0.999 Meter Excess(+) Full Conversion INR
25 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 0.399 Sqm Excess(+) Full Conversion INR
26 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content 0.799 Sqm Excess(+) Full Conversion INR
27 White washing with lime to give an even shade : 13.37.1 New work (three or more coats) 0.999 Sqm Excess(+) Full Conversion INR
28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 0.999 Sqm Excess(+) Full Conversion INR
29 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.82.2 Two coats 0.600 Sqm Excess(+) Full Conversion INR
30 Varnishing with varnish of approved brand and manufacture. 13.67.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 0.000 Sqm Excess(+) Full Conversion INR
31 Applying priming coat: 13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 0.999 Sqm Excess(+) Full Conversion INR
32 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved 13.53.1 steel primer but excluding a coat of mordant solution 0.999 Sqm Excess(+) Full Conversion INR
33 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 0.999 Kg Excess(+) Full Conversion INR
34 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. 16.70.1 Made of G.I. wire of dia 4 mm sqm 0.000 Sqm Excess(+) Full Conversion INR
35 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.116.91.1 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern 0.999 Sqm Excess(+) Full Conversion INR
36 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade. 13.65.1 Two or more coats on new work 0.000 Sqm Excess(+) Full Conversion INR
37 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. 0.999 Cum Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.88 MB
Bid_Document_NIT_514.pdf
Tender Documents • 0.88 MB
BOQ_312691.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid