CONSTRUCTION OF CLASS ROOM AT GARUDA ENVIRONMENTAL PARK AND TRAINING AREA UNDER GE KAMPTEE

Amount

(A) BUILDING WORKS

Surface dressing not exc 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m in depth and not exc 1.5m in width for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc. not exc and getting out in sqm on plan & getting out in soft/loose soil complete all as specified and directed.

All as per item No 2.00 here in before but each additional 1.5 m or part thereof in depth beyond the first 1.5m complete all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and fillings complete all as specified and directed.

Material and labour form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

Material and labour for providing RCC M-25 (Design mix) using 20mm graded aggregates as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

Material and labour form work to side of columns and similar work for fair finished complete all as specified and directed.

Material and labour for providing RCC M-25 (Design mix) (using 20 mm graded stone aggregates) as in columns and pillars etc complete all as specified and directed.

Material and labour form work to side of sides and soffits of floor, lintel or roof beams including supports, overhangs etc also splays between floor and beam etc complete for fair finished complete all as specified and directed.

Material and labour for providing RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

Material and labour form work to chullah hoods, chajjas, throughs and similar items including edges and similar work complete all as specified and directed.

Material and labour for providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

Material and labour formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide for fair finish complete all as specified and directed.

Material and labour formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Material and labour for providing RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

Supply and fixing mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking bending and binding spirally for hooping for columns, hooking ends & binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and directed.

Supply and Fixing mild steel TMT bars 5 mm dia and over upto and including 10mm dia as stirrups, spacers and binders cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 19.00 here-in-before but half brick wall in CM 1:4 complete all as specified and directed.

Material and labour Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished fair and even without using extra cement complete all as specified and directed.

Material and labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured & paid separately).

Material and labour Rendering 5 mm thick on concrete surfaces with CM 1:3 as on ceiling and finished fair and even without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound of approved quality complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer over 1mm putty layer complete all as specified and directed.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of requried shade (company depot tinted) with silicon additives @ 1.43 liter /10sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces complete all as specified and directed.

All as per item No 26.00 here-in-before but in ceiling complete all as specified and directed.

Material and labour for Moorum/red bajri filling in floors or paving's, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

Material and labour for RCC M-25 design mix (using 20mm graded stone aggregate) as in ground floor (for grade slab)cover slab, landings etc using of graded stone aggregate of suitable size (reinforcement will be measured and paid separately ) complete all as specified and directed.

Material and labour providing cement concrete 1:2:4 type B-1 (using 12.50mm graded stone aggregate) in cills, steps, plinth course, coping etc and the like including weathering, slightly rounded or chamfered angles and threading complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

Materials and labour for scratch free light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

All as per item No 33.00 here-in-before but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material and labour for Black granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, window-cills , cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed (Note- Granite stone shall be in one single pieces at window cill, cooking platform etc.)

Material and labour 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Supply and fix 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed

Material and labour for rendering 10 mm thick in cm 1:4 on brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement. complete all as specified and directed. Note: water proofing liquid will be measured and paid separately.

Material and labour for provision of water proofing treatment by using APP torch on mineral/slate finished membranes over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per Square meter on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3mm thick and weight not less than 3.00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectively and applying two coats of aluminum paint @ 100 ml per sqm complete all as per manufacturers instructions complete all as specified and directed.

Supply and fix for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

Supply and fixing mild steel work in tubular/square hollow trusses, purlins, rafter and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 with one coat of zinc chromate primer paint etc complete all as specified and directed.

Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix 5mm thick hollow (ISO) certified colour/printed designer PVC wall/ceiling sheet in strips and channel feathered at the edges for fixing on solid PVC wall/ceiling lining insulated PVC wall/ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site complete all as specified and directed . Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal all as specified and as directed.

Material and labour for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tale bar complete confirming to Fe-410 -W (Gde-E-250) quality A etc complete all as specified and directed.

Supply and fixing Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed.

Supply and fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary form work as required complete all as specified and directed.

Supply and fixing flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30 mm thickness and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for door etc, as specified in SSR part-I, Sec-08, Clause 8.24(a), complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, paneling of both side pre-laminated PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete all as specified and directed.

Supply and fixing 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

Supply and fixing Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm as in gauze door /window/ventilators shutters complete all as specified and directed

Material and labour preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing 100mm long medium weight cold rolled mild steel butt hinges complete all as specified and directed.

Supply and fixing 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

Supply and fixing 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

Supply and fixing 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing Towel Rail 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fixing Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover with chromium hangings device complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) 'S' / 'P' trap, including jointing with solvent cement complete all as specified and directed.

Supply and fixing 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make: Prayag Cat No 501 or equivalent in specified makes.

Supply and fixing Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

Supply and fixing Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Supply and fixing for toilet paper holder fixed to wall of chromium plated and fixed with brass screw complete all as specified and directed

Supply and fixing PVC jet for water closet (pedestal pattern) complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing for 15 mm bore CP Urinal spreader for urinals complete all as specified and directed

Supply and fixing PVC connection 15mm size, 450mm long with PTMP nuts both side complete all as specified and directed.

Supply and fixing 25mm dia drapery rod fancy powder coated fixed to wall with bracket and knobs complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks, triple layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 liters capacity complete all as specified and directed.

Supply and fixing ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specified and directed.

Supply and fixing bib taps fancy type chromium plated, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and as directed.

Supply and Fixing stop cock /Angle cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm girth complete all as specified and directed.

Material and labour 15mm GI tubing 'Medium grade' with all fitting and fixed complete tom wall and ceiling or laid in floor of flowing sizes complete all as specified and directed.

All as per item No 81.00 here-in-before but 20mm bore complete all as specified and directed.

Supply and fixing 140mm PTMT grating round hole/without hole (minimum weight 50 gms) over Rain Water Pipe/nahani trap with cement slurry Complete all as specified and as directed.

Supply and fixing vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed.

Supply and fixing in repair PVC waste pipe 32/40 mm dia complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipe, single socket, in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and directed.

Supply and fixing PVC (SWR) pipes of 75 mm bore single socket, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Material and labour PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specifed and directed complete all as specified and directed.

Supply and fixing CP grating of size 100mm dia complete all as specified and directed.

Supply and fixing PVC cowl slotted vent cowl 110 mm size complete all as specified and directed.

Supply and fixing in repair cabinet mirror 558.8x343x114.3mm size complete all as specified and directed. Make: pearl cat No MCB-251 or equivalent as specified in makes list

Supply and fixing cast iron 'P' Traps 100mm bore complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour precast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs, shelves and similar articles and set in cement mortar (1:4) including use and waste of formwork complete all as specified and directed.

Supply and fixing stainless steel Kitchen plate rack of size 24x30x10 Inch complete all as specified and directed. Make Prayag cat No.P-330 or equivalent as specified in makes list

Material and labour for 10 to 12mm thick toughened tinted/plain glass fixed to door or as partition or any other location including with brackets, supports, handles, lock , bottom machine and other accessories as required design complete all as specified and directed.

Supply and fixing 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

Treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square meter of surface area etc. complete all as specified and directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured etc. complete all as specified and directed.

Treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface etc. complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area etc. complete all as specified and directed.

Treating the soil along with external perimeter of building at the rate of 2.25 liter of emulsion per meter of the perimeter wall etc. complete all as specified and directed.

(B) SEWAGE DISPOSAL NOTE :- Items of TMT bar, 1:4:8 D2 and earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.

Excavation in trenches, not exceeding 1.5M wide and not exceeding 1.5 M in depth for foundation etc and getting out in Hard/ dense soil complete all as specified and as directed.

Material and labour for 150 mm dia NP3 drain pipes laid in trenches and jointed complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after thy are laid and tested for 150mm dia bore complete all as specified and as directed.

Material and labour for P.C.C 1:2:4 type B1 (using 20 mm graded stone aggregate) as in surface channels and drain, complete all as specified and as directed.

(C) ROAD / PATH/CULVERT/HARDSTANDING NOTE :- Items of earthwork such as removing excavated material shall be measured under relevant items here-in-before.

Excavation over area, not exceeding 1.5 m deep and getting out Soft/loose soil including Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth Complete all as specified and as directed.

Removal of excavated soil exceeding 1.5 km and n exc 5.0 Km and deposition where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed

Material and labour for plain cement concrete 100mm thick in foundations, filling and mass concrete sub bases/pavings Type D2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

Material and labour for Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

Material and labour Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed . Note : Sand cushion will be measured and paid separately

Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering threading and necessary formwork complete all as specified.

(D) INTERNAL ELECTRIFICATION

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multi stranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specified and directed. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 116.00 here-in-before but One ceiling/exhaust fan point controlled by one way switch and regulator, complete all as specified and directed.

All as per item No 116.00 here-in-before but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

All as per item No 116.00 here-in-before but One 3 pin 5 amp socket outlet point on the independent board with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm, complete all as specified and directed. Note :- max 4 independent point can be attached on one circuit

All as per item No 116.00 here-in-before but above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

All as per item No 116.00 here-in-before but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point, complete all as specified and directed.

Supply and fixing for switch modular fancy type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps complete all as specified and directed.

Supply and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fix fittings with recessed type LED down lighters 12 W, round/square color temp 3000/6000K as specified by Engineer-in-charge including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply and fix LED strip 5m long 25W 240V 50Hz with drivers , color temp 3000K as specified by EINC and fixing arrangement , complete all as specified and directed.

Supply and fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230 v, 50 Hz complete all as specified and directed.

Supply and fixing LED foot light 3W warm white fixed on wall and making connection complete all as specified and directed.

Supply and fixing building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Supply and Fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose with making holes complete all as specified and directed.

Supply and Fixing Exhaust fan PVC 250mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed.

Supply and Fixing wall mounted fan 400 mm sweep single phase 230 volts 50Hz with nut, bolts washers and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes, complete all as specified and directed.

Supply and Fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipe etc. complete all as specified and directed.

Supply and Fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and Fixing sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and Fixing MCB single pole & Neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Supply and Fixing MCB triple pole & neutral 415 volt 40 amps to 63 10 KA, complete all as specified and directed.

Supply and Fixing MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Material and labour for earthing complete with galvanized iron or steel earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the Material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 type B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

(E) EXTERNAL ELECTRIFICATION NOTE :- Items of earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.

Supply and fix Double wall corrugated High Density Polymer Ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/Tirupati or equivalent in specified makes.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4 core including testing after laid and jointed complete all as specified and directed. Make: Polycab / Havells / Finolex

(F) EXTERNAL WATER SUPPLY NOTE :- Items of earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.

Supply and Fixing GI tubing medium grade with all fittings laid in trenches and fixed complete to wall and ceilings or laid in floors as socket, bends/ elbow, union, tee etc for 25mm bores complete all as specified and directed.

Supply and Fixing GI tubing medium grade with all fittings laid in trenches and fixed complete to wall and ceilings or laid in floors as socket, bends/ elbow, union, tee etc for 20mm bores complete all as specified and directed.

Supply and Fixing in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 20mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Supply and Fixing in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 25mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

Material and labour for cutting of existing pipe and making for joining 25mm dia pipe with fitting complete all as specified and directed.

Construction of stone masonry valve pit for Sluice valve all as specified and including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corrosive paint over one coats of zinc chrome primer of 450X450X600mm (type 'B') complete all as specified and directed.

M/s T.S.JOHAR

chronicle enterprises

Rehal Construction

DIVESH HARISH SIRIAH

Devika Constructions

Bidder Name

Rehal Construction

chronicle enterprises

DEESHA CONSTRUCTIONS

Devika Constructions

M/s T.S.JOHAR

DIVESH HARISH SIRIAH