REPAIRS/ REPLACEMENT OF FLOORING, WALL, FALSE CEILING, JOINERY WORK, ROOF SHEET, PLUMBING, PVC WATER TANK CLEANING, SUNKEN FLOOR TREATMENT ETC AT OFFR QTR IN THE AREA OF AGE B/R-II JUTOGH UNDER GE JUTOGH

Amount

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

M&L for 20mm thick screed bed in CM (1:6) as in sub base of floor finish rough to laying floor finishes complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment laid complete all as specified and directed.

M&L for 15mm thick screed bed in CM (1:6) as in sub base of floor finish rough to laying floor finishes complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cment mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic cladding/elevation tiles joint free in vertical surfaces of size 350x250x7-8mm/ 450x300-350x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in skirting, dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl rendering 10mm thick in CM (1:4) complete all as specified and directed.

S & F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneious laid with approved rubber based adhesive in floors (incl dismantling of old PVC sheet from floor and removing from site) complete all as specified and directed.

Demolition of stone slabs and tiles of any description laid beded and pointed in any mortar or thickness in floors, aprons etc. complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for RCC 1:2:4. type B-1, using 20mm graded crushed stone aggregate as in columns/beams/slab, landings, chajja and in shelves and the like complete all as specified and directed.

M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floor & roofs,concrete railings, n.exc 20 cm wide horizontal or sloping and similar works exc 5cm but n.exc 10 cm wide, roughed finished surfaces of concrete complete all as specified and directed.

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

M & L for granite (of any type) 20 mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match fixed over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:4 finish surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls complete all as specified and directed.

M&L for preparing of new plastered surface walls and applying two coats of weather proof paint on external surfaces over and including a coat of alkali resistant priming paint at any height including necessary scaffolding etc. complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

S&F hot dipped galvanised iron imposed grid with 24 mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x 300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 4mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions all as specified and directed.

S&F Acoster PVC Laminated Gypsum ceiling tile of size 595 x595 x8 mm ,square edge of white colour comes with best Aluminium foil backing of good thermal insulation ,fire resistance,moisture resistance,environmental friendly,easy installation and easy to clean etc complete all as specified.

Taking down wall panelling and similar work complete all as specified and directed

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall and false ceiling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap in roofs with grade of Zinc coating 120 gm per sqm fixed with self-tapping screwscomplete all as specified and directed.

S & F 0.80 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent to shape as required, fixed with J / L bolts complete all as specified and directed.

S&F pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-engineered galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer /self tapping screw complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc complete all as specified and directed.

M&L for preparation of new steel surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares exceeding 0.5 sq.m in each pane, complete all as specified.

S & F sheet glass ordinary quality 3mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

S & F figured glass ordinary quality 4mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

Taking down chowkat or frames with shutters withoutout taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified.

S&F aluminium anodised powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side reflective glass (tinted glass) and PVC composite board 5mm thick fixed with aluminium clip section( including rubber beading) door section of aluminium door shutter as under complete and all as specified and directed. (i) Frame 100x 45x2mm (ii) Shutter style 85x44.45x2mm thick section (iii) Top rail 95.25x44.45x1.7mm thick (iv) Middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30x44.15x1.7mm thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle powder coated aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100mm 7 lever make Godreg (x) Hold fast aluminium 100mm long (xi) 1 Nos floor door spring each shutters (xii) Reinforced with 2 Nos 10mm dia MS bar with bolt complete on top and bottom rail of door.(Note : PVC/rubber linning brush for alround door)

S&F mild steel framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete cutting , drilled and welding for fixing of steel sheeting etc Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S & F 35mm thick IInd class hard wood plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on bith sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S & F 300mm ordinary rat rail pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel of 100mm size complete all as specified and directed.

S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-21 complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 100mm long complete all as specified and directed.

S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe minium weight for 210 gms complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr complete all as specified and directed.

S & F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover complete all as specified and directed.

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note : Any damage to float valve, pipe etc shall be make good by the contractor without any extra cost.

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note : Any damage to float valve, pipe etc shall be make good by the contractor without any extra cost.

S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed.

S & F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.

S& F in repairs 15mm size PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.

S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.

S & F 15mm brass CP basin mixer for mixing hot and cold water complete all as specified and directed.

S & F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe complete all as specified and directed.

S&F in repair towel ring of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (min weight 190 gms) complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestal pattern white with fittings P/S trap fixed with brass screw complete all as specified and directed.

S & F in repairs plastic water closet seat cover white/ coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&Fin repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.

S&F in repairs wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

M&L 20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.

M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.

S & F in repair stainless steel plate rack for kitchen of size 750 x 600 x 250mm, made of min 1.00 mm thick sheet fixed with stainless steel screw and rawl plug complete all as specified and directed.

S&F in repair PVC bath cabinet with mirror 350x450mm, complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 4mm dia plain mild steel wire, galvanised class 3, for mosquito net and for cloth drying including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. (each line of wire to be measured) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L for Mild steel sheet eaves gutters, 1mm thick 150mm dia galvanised class 3, half roundwith rounded edges complete all as specified and directed.

M&L for painting new or previosly untreated eaves gutter and pipes any description, n. exc 60 cm girth includingholder bats, distance pieces, etc. (length measured overbends, branches etc.) complete all as specified and directed.

M &L 75mm thick for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and directed.

Demolition of reinforeced cement Concrete of any description and in any position not therwise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in chajja repairs at any height including providing and erecting at site conventional steel double scaffolding to reach at any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and amterials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of praposed work etc complete all as specified and directed.

M&L for formwork to flat rough finished surface of concrete for chullah hoods, chajjas, troughs and similar items including edges any height complete all as specified and directed.

M&L for rendering/screed bed 15mm thick in CM 1:3 in (Sunken slab) mixed with and incl water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as specified and directed.

M&L for preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 ltr/sqm complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm icluding cleaning surfaces etc complete as in sunken portion complete all as specified and directed.

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in filling and mass concrete complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.

S&F in repair block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws in cup board shutteretc. or to timber frame work, complete all as specified and directed.

S&F 0.90mm thick decorative laminated sheet of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction complete all as specified and directed.

S&F Continous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw complete all as specified and directed.

S&F 75mm brass handle, cast type, polished bright, complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed.

S&F two lever brass, cupboard lock, grade 1, size 50mm complete all as specified and directed.

Dismantling timber scantlings framed work in fillets, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc complete all as specified and directed.

M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed.

M/S Shiv Kumar

Pankaj Builders