SPECIAL REPAIR TO CERTAIN SMQs AT N-4 AREA AT AFS KANPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base for floors to receive tiles complete all as specified and directed by Engineer in charge.

M & L for coloured Non skid joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

All as per item no 04 hereinbefore but as in skirting/dado over and including 10mm thick cement plaster as backing coat in CM 1:4 complete all as specified and directed .

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engineer in charge.

M & L for 18-20mm thick granite work of any type in window cills, cooking platforms (table rubbed and polished) and like set in cement plaster 1:4 including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engineer in charge.

M&L for providing 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M & L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) in flooring/plinth Protection/paving etc. finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M & L for 38x3mm thick plastic dividing strips inserted in floors complete all as specified and directed by Engr-in-charge.

M&L for providing 50 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base for floor finished rough to received finishes complete all as specified and as directed by the Engr -in-Charge.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block confirming to IS 15658-2006 of M-35 Grade with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc, of required strenth of thickness & size shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by the Engr -in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6.0 m mean radius built in CM 1:4, complete all as specified and as directed by the Engr -in-Charge.

All as per item no 14 herinbefore but except bricks. Note: Bricks retrieved from item no 13 shall be reused.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engr -in-Charge.

M&L for 15 mm thick rendering on internal surface in cement mortar 1:6 on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engr -in-Charge.

M&L for 15 mm thick rendering on external surface in cement mortar 1:4 on brick masonry walls finished even & smooth without using extra cement complete all as specified and as directed by the Engr -in-Charge.

M&L for 10 mm thick rendering after dubbing out average 10mm thick on irregular face of ceiling finished even & smooth without using extra cement including providing chicken wiremesh fixed with nails or screws complete all as specified and as directed by the Engr -in-Charge.

M&L for preparation of new surfaces and applying three coats of white wash as in celing complete all as specified and as directed by the Engr -in-Charge.

M&L for preparation of surfaces of wall and applying two coats of cement base paint over a coat of cement base primer complete all as specified and as directed by the Engr -in-Charge.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by the Engr -in-Charge.

M & L for providing water proof based wall care putty 2 mm thick (avg thickness) on wall and ceiling and putty applied with blade or steel patti to maintain homogeneously of application of putty or as per manufacturer instruction complete all as specified in SSR Part I and as directed by Engineer in charge.

M & L for complete removal of existing treatment on internal/external walls/ceiling/ chajja surface including filling the cracks, remove the nails,vegetations etc complete all as specified and as directed by the Engr -in-Charge.

M&L for preparing old plastered surface of wall pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke, roots, moulds, moss and efflorescence, salt and trading oil and greasy spot, nails, holes cracks and making good and applying one coat of cement base paint complete all as specified and as directed by the Engr -in-Charge.

M&L for preparing old plastered surface of wall and applying one coat of acrylic distemper oil emulsion complete all as specified and as directed by the Engr -in-Charge.

M&L for preparing old plastered surface of wall and applying two coat of acrylic distemper oil emulsion for smooth finishes complete all as specified and as directed by the Engr -in-Charge.

M&L for preparing old plastered or unplastered surface of wall applying one coats of exterior weather proof acrylic smooth emulsion with silicon additives of required shade that offers anti fungal high performance exterior wall finished with high performance complete all as specified and as directed by the Engr -in-Charge.

M&L for preparation of old painted wooden /wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of steel painted surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and including cleaning for re-fixing or removal from site complete all as directed.

Taking up or down 20 mm bore steel tubing and including cleaning for re-fixing or removal from site complete all as directed.

S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

Refixing of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling and floors etc). Note: GI tubing retrieved from item no 31 shall be reused.

Refixing of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling and floors etc).Note: GI tubing retrieved from item no 32 shall be reused.

Cutting chases, pinning in brick or stone wall built in cement mortar for concealed water tubing of any dia and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth as directed.

S&F in repairs 15 mm bore concealed stop cock, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms).

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and directed.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed.

S&F in repair 20 mm bore ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe minimum weight 210 gms complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm, complete all as specified and as directed.

S & F in repairs Swivel shower with Shower arm of PTMT, 195 mm long with bend of 45 degree with flange any colour for fixing with 15 mm pipe, (Minimum weight 40 grms).

S&F in repair waste fittings brass,chromium plated for WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 32 mm dia complete all as specified and as directed.

S & F in repairs 10 litre capacity, PVC valveless, symphonic action type, flushing cistern, low level , white with inlet, ball valve float, and handle including brackets and connections to pipes, complete all as specified and as directed.

S&F in repair PVC waste pipe for wash hand basin 32mm/40mm dia compete all as specified and directed.

S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges compete all as specified and directed.

S&F health faucet brass chromium plated with1 to 1.2 Mtr long flexible pipe and hook fixed with brass screw complete all as specified and as directed.

S&F in repair SS Soap dish, any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed.

S&F toilet paper holder of Chromium plated fixed with brass screw complete all as specified and as directed.

S&F 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified.

S&F in repairs for vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repairs vitreous china sqatting pan , orissa pattern, size 580x440 mm white , with integral foot rests (excluding flushing cistern and flush pipe complete all as spd and as directed .

S&F in repairs vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps ,waste pipes, chain and plug etc complete all as specified.

S&F in repairs for cast iron floor trap 75mm dia outlet with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate , complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n.exec 4 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

S&F 2nd class wood plain, solid straight chowkhats and frame , wought , framed double rebated on the solid , rounded or chamfered , put together with glue pinned at joints complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats, complete all as specified and directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F 19 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides as in cup board etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing .

S&F 100 mm size PVC butt hinges complete all as specified and directed.

S&F Butt Hinges medium weight cold rolled mild steel 100mm long complete all as specified.

S&F aluminum anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as specified and as directed.

S&F Aluminum anodized sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Dismantling steel windows and ventilators of any description complete all as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

M&L for Framed work as grills with end bars shoulders/framed guard bars hold fast etc and similar work conforming to Fe-410 or 310 complete all as directed

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying TWO coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass (any size quality or description) from wooden or steel frames glazed all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

S&F 300 mm long , ordinary rat tail rod pattern MS spring including roller and roller plate complete all as specified and directed by Engr-in-charge.

S&F framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed by Engr-in-charge.

S&F mild steel, plain black sheet 1.60 mm thick as in covering to door/windows shutters chowkats etc including round cut to size and fixed to MS doors/windows shutters frame with welding or riveted or welded complete all as specified and directed.

S & F Gun-metal, globe or gate valve 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F MS brackets for WHB/kitchen sink including taking out of existing WHB and kitchen sink and fixed in same position including making good etc complete all as specified and directed.

S&F in repairs sinks made of stainless steel sink with drainage board, made out of 1.00 mm thick sheet for kitchen or laboratory with plugs, washers and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330 mm x 160mm, complete all as specified and directed.

Dismantling PVC water tanks,exc 250 litres and n.exc 500 litres capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer ISI marked, hoisted & fixed in position, where directed complete all as specified and as directed.

S&F in repairs PVC cover of water storage tank of any capacity cover of PVC over head tank any capacity with hinging device, with necessary nuts, bolts and washers, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high using synthetic enamel hi glossy paint complete all as specified and directed.

Taking down rain water / vent pipes (any size & pattern) including all fittings, heads, noses, bends, swan necks etc including cleaning or repairing or removal to store, complete all as specified & directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall or floor complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or floor , complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed.

Easing of door shutters exc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters n.exc 1.0 Sqm each kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel of size 100 mm long at any location all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 75/100 mm dia bore, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

S&F cast iron soil, sand cast pipes of 100 mm dia bore, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors floor.

S&F cast iron soil, sand cast pipes of 75 mm dia bore, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors floor.

S&F 75 mm dia bore, cast iron bends or junctions of any radius complete all as specified and directed.

S&F 100 mm dia bore, cast iron bends or junctions of any radius complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition), of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with mild steel wires (annealed not less 0.9 mm dia complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC (1;2;4 ) type B1 (using 20 mm graded aggregate as in shelves, slab and the like etc complete all as specified and as directed by Engineer-in-Charge.

M&L for form work to side of soffits of suspended slabs such as roofs, floor slabs etc complete all as directed by Engineer-in-Charge.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

M&L for anodized aluminium snap grid 605 x 606 mm frame work of angle 25 mm x 25 mm x 1.30 mm and main Tee 38 mm x 26 mm x 1.30 mm for false ceiling complete all as specified.

S&F hangers 4 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleat made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.

M&L for providing and fixing of 9 mm PVC laminated Gypsum board in ceiling fixed with screws as per manufacture instructions for any height complete all as specified and directed.

Running welding in repairs exc 6 mm but n exc 9 mm thickness of metal to be welded complete all as specified and directed.

Welding in repairs exc 2.5 mm but n. exc 5 mm in length, Exc. 6mm but n.exc 9mm thickness of metal to be welded complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as directed.

Supply and fixing 0.50 mm thick coloured galvalume profile sheet in roofing shall be with feed material manufactured from 0.50 mm (minimum) base metal thickness (BMT), minimum 550 Mpa yield strength and shall confirm to physical specifications of ASTM-792 or equivalent, colour coated galvalume sheet shall have maximum pitch of 250 mm c/c and minimum 28 mm crest depth in lenght as per site requirement. The steel sheet shall be coated with hot dip metallic, aluminium Zinc alloy (55% Aluminium, 43.5% Zink, 1.5% silicon) coating AZ 150 as 150 gm/Sqm total on both sides. The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing. The manufacturer of sheet should submit related documents for expected product services performances of pre paintted metal sheet as per relevant ASTM/IS. Manufactuer's recommended installation methodology, all types of accessories considered for roofting. Fasterns shall be coloured baked enamel supper durable, polyester with silicon coating of film having thickness of minimum 25 micron (including primer) on top minimum 10 micron (including primer on interior fance). The paint shall be shade as approved by GE. The sheet shall have wide panes with minimum 2 small stiffening ribs for effective with self-drilling screws as per manufacturer instructions complete all as specified and directed . (Note : Total thickness of sheet with BMT, AZ 150 coating and panting shall not be less than 0.575 mm).

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , ridges, hips, valley gutter ,drip and straight flashing (length and girth as fixed)with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section in any position complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters, vertical supports, purlins where connected to comman rafters and running rails and guided for sliding doors, frame wall ties , work for chajjas/rain gaurd, fixed with angle cleats or other connecting plaste including cutting, welding etc Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M & L for concealed point wiring for one light, fan point, call bell point on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 25 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge

One light / ceiling fan /exhaust fan point controlled by one way independent switch.

One 2/3 pin 5 Amps socket outlet point on same board controlled by one switch.

One 2/3 pin 5 Amps socket outlet point on independent board controlled by one switch.

One bell/buzzer point controlled by one way independent switch.

One light point controlled by two nos two way switch 5 amp independent switch.

All as per item No 123 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S&F for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

S&F for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified.

S&F for socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F for ceiling rose, surface backlite, 65 x 20 mm three terminalconforming/ ISI Marked.

S&F for electric bell AC 230 V single pole, multi music type complete all as specified.

S&F bell push 5 Amp, 240V, single pole, one way compelte all as specified and directed.

M&L for switch flush type single pole two way 5 Amps, 240 volts, white finish for staircase lighting complete all as specified.

S&F lamp holder cased body of brass with back plate complete all as specified and directed.

S&F 14/15 Watt LED lamp complete all as specified and directed.

S&F in replacement LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on two Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings as directed.

S&F in replacement LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on two Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings as directed.

S&F Endural LED bulk head fitting 8-10 watt Plastic Body, heat resistant, with specially designed gasket incuding making all necessary fixing arrangement and electrical connection all as per directed by Engr- in - charge.

Supply and fixing ceiling fan in size 1200 mm sweep white colour BEE 5 star rated copper wound energy saving with set of sweep/ extension rod /"U" clamp and other accessories single phase 50 Hzs incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe including taking down old ceiling fan and depositing to MES store yard complete. Note : - Old ceiling fan shall be deposited to MES store yard

S&F ventilating fan with motor assembly (plastic type) of size 250 mm (10'') for ventilator complete and making electric connection using three core copper cable from ceiling rose to fans all as specified & directed by Engineer in Charge.

Supply and fixing exhaust fan 300 mm sweep 1400 RPM copper winding, steel body heavy duty with louver mounting bracket and making electric connection using three core copper cable drawn through in PVC conduit pipe including taking down old exhaust fan and depositing to MES store yard complete all as directed.

M&L for making circular / rectangular holes suitable for fixing of 10" sweep ventilating Fans by cutting the wall any thickness/ required circumstances for exhaust fan of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar (1:3) complete all as specified and directed by Engineer in Charge.

M&L for making circular / rectangular holes suitable for fixing of 12" sweep exhaust Fans by cutting the wall any thickness/ required circumstances for exhaust fan of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar (1:3) complete all as specified and directed by Engineer in Charge.

Supply and fix sheet metal enclosure distribution board TPN horizontal type , 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertical type including MCB TPN 4 pole 63 Amps 415 volts as incomer incl concealed in surface of wall and making all connection using gland , thimbles in required size including taking down of old unserviceable DB with accessoires complete all as specified and directed. Note: Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts concealed in the surface of wall including taking down of old unserviceable DBs with accessories complete.Make :- ABB/Legrand/ Seimens/ L&T or equivalent make as mentioned in Appx 'B'. Note: Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

S & F MCB SP 6-32 Amps 'C' Curve characteristics 10 KA breaking capacity complete all as specified and directed.

S & F MCB SPN 40 Amps 'C' Curve characteristics 10 KA breaking capacity complete all as specified and directed.

S&F MCB TPN 63 Amp 'C' Curve characteristics 10 KA breaking capacity complete all as specified and directed.

S&F RCCB Four pole 415volt 63 Amp , 30mA capacity having C-curve characteristics connected with suitable lugs including testing and commissioning complete all as specified and directed.

M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 40 mm dia GI pipe light grade for protection of earth lead up to 3 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I.

M&L for Earth continuity conductor 4mm dia GI or steel wire or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc including taking down earth continuity conductor as required complete all as specified and directed

Supply, laying, jointing and testing underground cable of size 25 Sqmm 4 core, 1100 volts grade, XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with multi-stranded aluminium conductor laid in trenches, passing through pipe, ducts and making electrical connection with including suitable size lugs proper crimped by crimping tool, thimbles, glands, GI Nuts and bolts, washers, insulation tape etc including taking down old cable complete all as specified and directed.

Material and labour for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 4 Sqmm drawn in and including concelead rigid non metallic PVC conduit, medium grade ISI marked not less than 20 mm dia with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor of size 4 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Two run of 4 sqmm cable and one run of 4 sqmm earth wire and one run of PVC conduit pipe shall be measured as one unit length. (ii) Cost of cutting /chassesing/ plastering /finishes etc shall be carried out to matching with existing surfaces complete all as specified and directed.

Material and labour for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 6 Sqmm drawn in and including concealed rigid non metallic PVC conduit, medium grade ISI marked not less than 20 mm dia with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Two run of 6 sqmm cable and one run of 6 sqmm earth wire and one run of PVC conduit pipe shall be measured as one unit length. (ii) Cost of cutting /chasing/ plastering /finishes etc shall be carried out to matching with existing surfaces complete all as specified and directed.

Material and labour for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 2.5 Sqmm drawn in and including concealed rigid non metallic PVC conduit, medium grade ISI marked not less than 20 mm dia with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 2.5 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Two run of 2.5 sqmm cable and one run of 2.5 sqmm earth wire and one run of PVC conduit pipe shall be measured as one unit length. (ii) Cost of cutting /chasing/ plastering /finishes etc shall be carried out to matching with existing surfaces complete all as specified and directed.

Material and labour sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 1.5 Sqmm drawn in and including concealed rigid non metallic PVC conduit, medium grade ISI marked not less than 20 mm dia with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Two run of 1.5 sqmm cable and one run of 1.5 sqmm earth wire and one run of PVC conduit pipe shall be measured as one unit length. (ii) Cost of cutting /chasing/ plastering /finishes etc shall be carried out to matching with existing surfaces complete all as specified and directed.

Supply and fix in repair LED building light roadway luminaire 25 watts with high power, energy saving and environment friendly long life versatile pressure die cast aluminium IP66 with arcylic cover suitale for pole dia 43 mm max complete all as specified and directed by Engr-in-charge. Note : Rate quoted by the contractor deemed to be included three core twisted wire 0.75 sq mm from light fittings to ceiling rose as and where required complete all as directed by Engr-in-charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for laying of cables and getting out including trimming of sides complete all as specified and directed.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick each layer compete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness shall be measured for payment.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other for cable protection complete all as specified and directed.

Supply and laying 40 mm bore galvanized steel tubing "light grade" with all fittings,clamps, bolts, nuts and washers (ISI Marked) and fixing to the pole complete with all fittings, laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

A.B.Enterprises

SHYAMA CONSTRUCTION COMPANY

M/s DKS Engineering Works

jayanti associates

M/S SDS Construction Co.

Deepesh Electricals

J.B.ENTERPRISES