Laying of 33 KV 3 400 sq mm 2run UG cable for conversion of the existing 22 KV Palathurai feeder HT 3 wire OH line into 33 KV at Church colony railway track crossing

Amount

Clearing Scrub jungle & disposing the same away from site including all initial lead & lifts etc. Complete

Dismantling and clearing away the Brick/ Stone masonry walls of any thickness and built in cement mortar including all labour charges, lead, lift etc complete

Supplying and erection of cast iron 250mm dia pipes at railway crossing by adopting trunchless method using Horizontal directional drilling augur type boring device with cutting head to drill the horizontal bore across the railway track by suitable to accommodate CI pipe of diameter 250 mm dia and insertion of CI 250 mm. Each length of pipe shall be firmly coupled with suitable coupling / fusing so that the alignment is straight and there by there is no hindrance to the pulling underground cables through the pipes there after including cost of all materails, labour, transporting, lead, lift, etc. complete

Earth work excavation in all kinds of soils within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width including all labour charges, lead, lift etc complete

Earth work excavation in soft disintegrated rock (not requiring blasting)and depositing on bank within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width including all labour charges, lead, lift etc complete

Uncoiling and laying of 33 KV HT cable 3x 400 Sq.mm in the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc without any damage including transporting of cables, tools and plants labour lead, lift etc complete

Cutting the cable of required length and sealing the ends with suitable end caps for 33 KV XLPE cables, including cost of all materials, Tools and Plants,leads and lifts etc., complete (Locally enquired rate)

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete.

Supply and erection of cable marker in RCC (1:2:4) using 20mmHBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters "TNEB UG CABLE" Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete.

Providing watch and ward required at site as directed by the Engineer incharge

Providing barry cade arrangements while execution of work including labour charges etc complete.

Supply of 33KV End termination kit 3x400sq.mm OD HS type

Labour Charges for erection of 33 KV 3 x 400 sqmm Outdoor/Indoor Termination kit

Supply of OD Straight joint kit 33KV 3x400sq.mm HS type

Labour Charges for erection of 33 KV 3 x 400 sqmm Straight joint kit

Labour charges for UG Cable earthing using GI pipe

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only