SPECIAL REPAIR TO PERIMETER SECURITY WALL AT SILA GRN UNDER GE NAGROTA

Amount

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Excavating in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Sof t/ loose soil complete all as specified and directed

M & L PCC 1:4:8 type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified and directed

M&L Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L Use and waste of formwork for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed

M &L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

M&L Reinforced cement concrete in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed

M & L Use and waste of formwork for sides of columns posts, struts,piers square or rectangular or polygonal rough finished surface of concrete all as specified.

M&L Reinforced cement concrete in Columns, pillars, piers, posts and struts Type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed

M& L Reinforced cement concrete in Beams, cantilevers, bressummers, lintels over 1.5m span (20 mm graded aggregate)Type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed

M & L TMT bar 10mm dia and over cut to length bend to shape required indd cranking bending spirally for column, hooking ends & binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with chips complete all as specified and directed

M & L TMT bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed

M & L brick work with subclass ‘B’ bricks using old size straight on plan exc 6m mean radius built in cement mortar 1:6 as directed complete all as specified and directed

M&L rendering 15 mm thick on external fair faces brick /concrete surfaces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement all as specified and directed.

M&L rendering 15 mm thick on external faces brick /concrete surfaces other than fair faces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement complete all as specified and directed

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer Complete all as specified and directed.

S& F Mild steel (MS Angle Iron) as in posts and struts in fencing incl cutting tops shape as directed welding, drilled notching for wire etc incl all necessary drilling etc. And similar work incl embedding in concrete conforming to Fe-410-0 or Fe-310-0 incl one shop coat of red oxide primer (incl preparation of surface) at contractor's work shop complete all as specified and directed (Unit rate also include for locking holes after fixing of barbed wire and welding to bent portion as directed.)

M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed

Material and labour for PCC 1:2:4 type B-0 (using 12.5mm graded agg) as in Coping,roof kerbs or mud stops,benching , cills ,coping etc and like including weathering and slightly rounded or chamfered angles and throating including fair finishing to top surface and including form work where required as directed by Engineer-in- charge.

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., acomplete all as specified and directed

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed

Returing filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick. complete all as specified and directed

S&F in repair concertina coil 610mm dia in stress position hot dipped galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with help of dovetail clips (18 SWG) fixed over barbed with the angle iron the concertina coil is to be fixed with barbed wire at points where coil touches the bottom barbed wire with the help of hug rings (24 SWG) complete all as specified and as directed

SHARMA TRADERS (BID ID -3292728)

DES RAJ NAGPAL CONTRACTORS PVT.LTD (BID ID -3289967)

KIRAN AGENCIES (BID ID -3294535)

M/S PARAMJEET SINGH (BID ID -3289876)

Malik Construction (BID ID -3294430)

G N TRADER AND BUILDERS (BID ID -3292718)