PROVISION OF DEF TRAINING AND SINGLE LIVING ACCN AT CME PUNE

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Single Living Accommodation for 180 ORs , Cook House & Dining Hall, Drying & Ironing Room (consists of Block 'A', 'B' & 'C') including Courtyard, Wicket gate with boundary wall for 180 OR's complete all as shown on drawings and as specified.

Construction of Block of Bicycle cum Scooter stand compete all as shown on drawings and as specified.

Construction of Septic tank for 200 users complete all as shown on drawing No. CEPZ/88/TD/17M sheet 1/4 to 4/4 and as specified

Construction of Soakage well of size 3.60 metre dia and 3.0 metre depth complete all as shown on drawing No. CEPZ/2019/TD/03 sheet 1/2 & 2/2 and as specified.

NOTE: Schedule ‘A’ Part II to XIII items which are Prepriced by MES, Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Total amount of Sch ‘A’ Part II (Internal Water Supply)

Total amount of Sch ‘A’ Part III (Internal Electric Supply)

Total amount of Sch 'A' Part-IV (Road, Path, Hard Standing and Culverts)

Total amount of Sch ‘A’ Part V (MS Gate)

Total amount of Sch ‘A’ Part VI (Area Drainage)

Total amount of Sch ‘A’ Part VII (Sewage Disposal)

Total amount of Sch ‘A’ Part VIII (Solar Water Heating System)

Total amount of Sch 'A' Part-IX (External Water Supply)

Total amount of Sch 'A' Part-X (External Electrification)

Total amount of Sch 'A' Part-XI (Rain Water Harvesting)

Total amount of Sch 'A' Part-XII (Dismantling/Demolition)

Total amount of Sch 'A' Part-XIII (Site clearance, Excavation and Earthwork)

SCHEDULE 'A' PART-XIV (MISC B/R AND E/M WORKS) NOTE: Schedule ‘A’ Part II to XIII items, which are not Prepriced by MES are given hereunder, Bidders shall insert their rate in Column-7 only and the Estimated rate indicated as "0.0" are for that purpose.

S&F Bib taps, 15 mm bore, chromium plated with long body suitable for kitchen sink with crutch or butterfly handle, screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed.

S&F Two way cock, 15 mm bore, chromium plated with wall flange, screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and directed.

S&F switch piano, flush type, 230 volts, single pole two way, 5/6 Amp ISI marked white/ivory finish complete all as specified and directed.

S&F Factory made sheet metal enclosure VTPN as MCCB incomer and MCB SP out going 4 way 415 V AC, double door surface/ flush mounted, made with CRCA steel sheet duly powder coated, protection class IP 43, as per L&T Cat No. DBVTH004DD or equivalent in other makes specified, complete all as specified and directed.

S&F MCCB 4 pole, 415 Volt 50 Hz of capacity 125 Amp 18 KA suitable for VTPN DB as incomer with spreader terminal all as per L&T Cat No. DU125-D-CM9067700LO, Ics = 100% of Icu or equivalent in other makes specified, complete all as specified and directed.

S&F MCCB 4 pole, 415 Volt 50 Hz of capacity 63 Amp 18 KA suitable for VTPN DB as incomer with spreader terminal all as per L&T Cat No. DU100-D-CM9051800HO, Ics = 100% of Icu or equivalent in other makes specified, complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of double poles and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning, all as specified and directed of make L&T or equivalent in other makes specified, complete all as specified and directed.

Supply , installing and commissioning of Water Cooler electrically driven single phase, fully stainless steel body having approximate storage and cooling capacity of 40/80 litres, including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes:- Samsung/LG/Godrej/Voltas/Usha).

Supply , installing and commissioning of Refrigerator, electric driven, single phase AC 230 Volts 50 Hz of capacity 250 litres, double door type, frost free, minimum BEE 3 star rated including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes:- Samsung/LG/Godrej/Whirlpool).

Supply, installing and commissioning Glass Top Deep Freezer, electric driven, single phase AC 230 Volts 50 Hz of capacity 320 Litres, including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes:- Samsung/LG/Godrej/Whirlpool/Voltas).

Supply, installing and commissioning Desert Cooler, capacity of airflow nearest to 1200 cfm/h, plastic body, 3 speed control, electric driven single phase AC 230 Volts 50 Hz, suitable for room size upto 290 Sqft including connecting lead and suitable 3 pin plug top complete with or without trolley mounted for suitable height as per site requirement all as specified and directed. (Makes:- Symphony/Bajaj/Crompton).

Supply, installing and commissioning Water Purifier (RO + UV + UF + TDS), electric driven single phase AC 230 Volts 50 Hz, having nominal storage capacity 08 litre and purifying flow capacity 20 litre/hour including connecting lead and suitable 3 pin plug top complete all as specified and directed.(Makes:- Kent/ Eureka Forbes/ Liv Pure).

Supply, Install, Testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) of capacity 300 LPD based on indirect transfer of heat of capacity as following with heat exchanger, pressurized system with electric heating back up with the following details /specifications, including any other detail/ specification as per manufacturer for better performance of the plant complete all as specified and as directed for the following capacity:-

(a) Capacity of tank : As mentioned.

(b) Type : Pressurized system

(c) Inner Tank material ; 3 mm galvanised iron

(d) Insulation : PUF 50 mm

(e) Outer cladding ; Pre painted galvanised iron (PPGI)

(f) Back up heater : 2 KW x 2 Nos with thermostat control 230 V AC

(g) Tank support : 40 x 5 mm MS powder coated angle

(h) Tank Testing ; Factory pressure tested for normal system at 5 Kg/cm²

(j) No of collectors : 04 Nos

(k) Absorber Material : Copper tube with aluminium absorber

Supply, Install, Testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) of capacity 200 LPD based on indirect transfer of heat of capacity as following with heat exchanger, pressurized system with electric heating back up with the following details /specifications, including any other detail/ specification as per manufacturer for better performance of the plant complete all as specified and as directed for the following capacity:-

(a) Capacity of tank : As mentioned.

(b) Type : Pressurized system

(c) Inner Tank material ; 3 mm galvanised iron

(d) Insulation : PUF 50 mm

(e) Outer cladding ; Pre painted galvanised iron (PPGI)

(f) Back up heater : 2 KW x 2 Nos with thermostat control 230 V AC

(g) Tank support : 40 x 5 mm MS powder coated angle

(h) Tank Testing ; Factory pressure tested for normal system at 5 Kg/cm²

(j) No of collectors : 04 Nos

(k) Absorber Material : Copper tube with aluminium absorber

NOTES for item Nos 14.13 and 14.25: (a) The cost of all accessories, piping system and electrical cable, backup stainless steel hot water tank insulated of capacity as per recommendation of manufacturer etc. as per standard details provided by the manufacturer shall be included in the rate of the item and nothing extra on whatsoever ground shall be admissible..

(b) However, the rate does not include the cost of cold water tank, cold water piping and hot water piping which shall be measured and paid separately. (c) Makes as per Appendix 'C'.

M&L Cutting existing cast iron main of size 150 mm dia in position for and reducing to required length before laying in position for insertion of new tees, branches etc at site, including inserting Tee special of size 150mm x 150mm x 80mm for branch connection including necessary CI special fitting complete all as specified and directed.

M & L Construction of Flyash brick masonry valve pit chamber 120 cm x 120 cm and 100 cm deep (internal size) (above GL 30 cm) suitable for fixing sluice valve, with 15 cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stones, chamber constructed with 23cm thick brick wall using old size fly ash bricks built in cement and sand mortar 1:4 and finished with 15 mm thick internal plaster including top of masonry and externally upto 15 cm below GL, plaster finished with a floating coat of neat cement, 5 mm thick MS cover plate with 50mm x 50mm x 6mm MS angle frame fixed in and including PCC 1:2:4 type B-1 coping with 25mmx6mm flat iron hold fasts, hinges, handles, locking arrangements and applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surface including necessary excavation and earth work in any type of soil and disposal of surplus soil outside MD land etc. complete all as specified and directed. (for tapping point from 150mm pipe line to 80mm pipe line).

Supply, install, testing & commissioning step down distribution Transformer of capacity 100 KVA, outdoor type, energy efficient level-III conforming to IS: 1180 (Part-I) 2014, copper wound, HT-11 KV, 3 phase, LT- 433 Volts 50 Hz AC 3 phase, oil immersed, naturally air cooled. delta connected on primary side (11 KV HV side) and star connected on secondary side (433 V LV side) in accordance with vector group DYN 11 with neutral brought out on secondary LV side with tapping at ± 2.5% ± 5 % ± 7.5 % off load tap changer gear in steps of 2.5% including initial oil filling to appropriate level having dielectric breakdown strength ≥50 KV and all standard fittings as per IS: 1180 Part-I, 2014. The unit rate of transformer shall include mounted on PCC platform with fencing, steel gate as per TD Drg No CEPZ/98/TD/6 and following accessories / fittings / specifications:-

(a) Non detachable rating & terminal marking plates

(b) Lifting lugs for main tank and top cover.

(c) Earthing terminals with lugs - 02 Nos

(d) Thermometer pocket with cap along with dial type thermometer - 01 No

(e) Externally hand operated off circuit tap changing device with locking arrangement.

(f) Oil conservator tank with oil filling hole & cap and oil level gauge.

(g) Silica gel dehydrating breather with first charged silica gel.

(h) Top filler valve with plug.

(j) Drain cum bottom filter valve with plug.

(k) Air vent, explosion vent, fings etc.

(l) Unidirectional reversible roller - 04 Nos

(m) HV bushing - 03 Nos

(n) LV bushing - 04 Nos

(o) First fill oil.

(p) Base channel 100 x 50mm, 460 mm long with holes to make them suitable for fixing on a platform or plinth including making locking arrangement.

(q) First fill of fresh oil conforming to relevant IS and tested upto 50 KV dielectric strength.

(r) Extra bushing for neutral outside the L.T. cable box for providing independent earthing for neutral.

(s) Provision of two numbers danger boards 250 x 200 mm size made out of 1.6 mm thick MS plate, vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour, one at H.T. side and other on L.T. side.

(t) Any other fittings /accessories so as to confirm the whole transformer to IS:1180-2014.

NOTE:Contractor shall submit technical, constructional and safety features drawings for approval of GE.

S&F including jointing and testing LT UG XLPE insulated and sheathed, armoured with multi stranded aluminium conductor, electric power cables (heavy duty) LT 1100 volts, laid in trenches / ducts or fixed to poles / walls or laid under roads /paths/ drain/ culvert duly encased in and including suitable size G.I. pipe light grade, complete all as specified and directed of the following sizes:-

(a) 10 Sqmm 2 Core

(b) 25 Sqmm 4 core

(c) 50 Sqmm 3.5 Core

(d) 120 Sqmm 3.5 Core

S&F including jointing and testing HT UG XLPE insulated, screened, PVC bedded and sheathed, armoured with multi stranded aluminium conductor, electric power cables (heavy duty) HT 11000 volts of size 3 core 95 sq.mm (Earthed), laid in trenches / ducts or fixed to poles / walls or laid under roads /paths/ drain/ culvert duly encased in and including suitable size G.I. pipe light grade, complete all as specified and directed.

M&L Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm, complete all as specified and directed.

S&F Gang operated air break switch off load disconnecting switch 11 KV 200 Amp with 12 insulators, triple pole, each pole consisting of galvanised steel base HT insulator as per BSS/ISS non-ferrous knife and spring loaded contacts, arching arm of adequate section to break magnetising current "TILTING TYPE" complete with square shaft of GI, adequate length for Phase separation, operating handle complete with locking arrangement with lock and key in both "OFF" and "ON" position, with suitable clamps, nuts, bolts complete for fixing on the channel, making all electric connections / jumpers with bottle lugs commissioning and testing complete along with supply and fix new drop out expulsion fuse HT 11 KV grade rating up to 50 Amps mounted on insulators and steel frame complete all heavy fuse barrel with fuse element complete set conforming to IS: 1818 as specified and as directed.

Supplying, fixing, testing and commissioning LED street light fittings 35 watt, 230 volt AC outdoor type with high pressure die cast aluminium housing heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with top opening driver cover for easy maintenance interchangeable electronic driver high efficiency longer life, protection against high surges, high / low voltage cut-off, open/short circuit protection and high power factor LEDs as light source including fittings and connection new street light on pole bracket and PVC insulated cable with copper conductor 1.50 sq.mm three core drawn through pole from pole junction box to street light fitting complete all as specified and as directed.

S&F Pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 300 x 200 x 105 mm (Internal) comprising one number SP MCB single pole of capacity 6 amps and one No heavy duty connector, polycarbonate body with four terminals for loop in & loop out suitable for street light system including fixing arrangement with bracket made out of 25 x 3 mm MS flat and nuts and bolts etc. all as specified and directed.

S&F Street light bracket made out of 40 mm dia light grade GI pipe 1.5 metre long bend to shape including necessary fixing arrangement with MS Clamps of suitable size made out of 35 x 4 mm MS flat of suitable shape to fix on pole including nuts and bolts etc. all as specified and directed.

I) Incomer

(a) MCCB Four pole, 160 Amp, 36 KA, 415 Volt with adjustable thermal magnetic setting lcs = 100% lcu including connecting with bus bar - 01 No. (Incoming).

(b) Astronomical time switches 240 volt single phase of 16 Amp rating with contactor fitted inside steel enclosure - 01 No.

II) Out going

(a) MCCB three pole, 125 Amp, 25 KA with adjustable thermal magnetic setting lcs = 100% lcu including connecting with bus bar - 02 Nos. (For single living accn bldg).

(b) MCCB three pole, 63 Amp, 25 KA with adjustable thermal magnetic setting lcs = 100% lcu including connecting with bus bar - 01 Nos. (For cook house & dining hall).

(c) MCB SPN, 10 Amp, 240 Volt, 50 Hz, 10 KA including connection with bus bar - 01 No, (For street light)

(f) Phase indication lamp LED type for indicating R-Y-B phases with back up HRC fuse - 01 Set.

S & F Chromium plated Basin mixer for mixing hot and cold water of make Jaguar Model No ORP-10011BPM or equivalent model in makes as per Appendix 'C' complete, screwed down for iron pipes and fixed complete all as specified and directed.

S&F Hand shower (Health faucet) with 1 metre long easy flex tube in chrome finish and wall hook with NRV (Back flow preventer) of Make- Jaguar model No ALD-579 or equivalent model in makes as per Appendix 'C' complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick, buried vertically in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers, electrode connected to and including galvanised iron earth lead strip of size 32mm x 6mm up to 7.5 m from earthing by means of bolts, nuts and washers of galvanised iron or steel including necessary excavation and earth work in any type of soil, removal of surplus soil to a distance n. exc 50 m, PCC 1:3:6 type C-1 earth chamber of outer dimensions 54 x 54 x 30 cm and internal dimensions 30 x 30 x 30 cm with RCC 1:2:4 type B1 cover reinforced of size 54 x 54 x 10 cm with 6mm dia mild steel round bars @ 15cm C/C both way and 8 mm dia mild steel round bars for handle, GI pipe 40 mm dia light grade with required fittings for protection of GI earth strip from earth plate to test point / plant / machineries buried in ground, laid under floors/ plinths or fixes on walls or concealed in walls etc; both to be provided to the extent as required at site, 20 mm dia GI pipe medium grade for watering arrangements with funnel internally secured with wire mesh all as shown in electrical plate No.3 of SSR Part I, complete all as specified and directed, including testing on completion.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick, buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to and including galvanised earth wire 4.00 mm dia by means of bolts, nuts and washers of galvanised iron or steel upto 7.5 mtr long from earth point to test point, GI pipe 15 mm dia light grade for protection of GI earth lead wire, buried in ground, laid under floors/ plinths or fixes on walls or concealed in walls etc; complete all as shown in electrical plate No. 3 of SSR Part I (2009) connected to metallic bodies of HT/LT equipment including provision of mixture of charcoal dust and common salt packed all around upto minimum 150 mm around the earth plate including PCC 1:3:6 type C1 earth chamber of outer dimensions 54 x 54 x 30 cm and internal dimensions 30 x 30 x 30 cm with RCC 1:2:4 type B1 cover reinforced of size 54 x 54 x 10 cm with 6 mm dia mild steel round bars @ 15cm C/C both way and 8 mm dia mild steel round bars for handle, GI 20 mm dia medium grade pipe with M.S. funnel with wire mesh for watering arrangement including excavation and earth work in any type of strata complete all as specified and directed, including testing on completion.

Supply and fixing LED lights fitting 1x 20W, 220V AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells Cat Part No. ENDURALINEARNEO BS20W LED 865 SPCWH/ Wipro Cat Part No. LL20-281-XXX-65AL1/ Bajaj Cat Part No. BCLSBAL 20W CW or equivalent in makes specified in Appendix 'C'.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells Cat Part No. ENDURALINEARNEO BS10W LED 865 SPCWH/ Wipro Cat Part No. LL20-111-XXX-65 NE3/ Bajaj Cat Part No. BCLSB 10 NW or equivalent in makes specified in Appendix 'C'.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells Cat Part No. PLUTONEO 2X2 PLR 34W LED 857S/ Wipro Cat Part No. CRCO 10 SO 38 HP 57GL/ Bajaj Cat Part No. B2SSQL 36W LED WH or equivalent in makes specified in Appendix 'C'.

Supply and fixing LED light fitting 1 x 9W / 1 X 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells Cat Part No. HEXAFT 10W LED 857SSY MBOPC/ Wipro Cat Part No. LW07-141-XXX-57-G1/ Bajaj Cat Part No. BIBWP 10W LED or equivalent in makes specified in Appendix 'C'.

Siya constructions

Horizon Construction

shah construction

ganesh electricals and airconditioners

N. H. Saluji & Associates

surendra infrastructure pvt ltd

K R TRADERS

United Sales Corporation